STOP MOUNTING THESE TO THE BODY BOLTS AND ISOLATORS!! Someone make some good bolt on frame mounted sliders. Such a slim selection…. These body mounted sliders eventually break and prematurely wear the body mount bolts…. Terrible design
@frankrizzo6776Ай бұрын
Based on the price of these things you make products for rich dumb guys.
@takingu2skoo462Ай бұрын
I used a impact gun and couldn't get the darn things out
@CallaFab3 ай бұрын
Ha ha ha. Video didn't even mention the spacer you need.
@mmaaddict783 ай бұрын
Wouldn't it be a good idea to back every bolt out one turn each all around the Jeep to start and then one or two turns each all around again so that the body doesn't tweak once a few bolts are fully removed and put force on the last bolt or two before they are loose? This is the technique I'm going to try when I do my body bolt mounted rock sliders next weekend. Kind of like a star pattern you'd use when doing a wheel or cylinder head bolts.
@chaunceyrash50673 ай бұрын
You had me till you didn’t wipe it down after sanding😑
@coloradomallcrawlers5 ай бұрын
I’m ordering these soon… the stock rubicon rock rails are junk, but I like the stock look yours provide.
@coloradomallcrawlers5 ай бұрын
Looks good. I’m ordering your JL ones soon (no one should rely on Mopar’s “Rock Rails”), but I need to find something for my TJ too.
@jasonhudgins94378 ай бұрын
I don’t understand how to install these. Nothing lines up. I would not recommend until there is better instructions. Inner fenders line up almost 100 percent
@Tinker3504 Жыл бұрын
Commenting because… my front passenger body bolt broke. I ended up welding the slider to the body mount frame tabs. I’m cutting a massive hole in the floor to get the bolt out in a few minutes. Fun times.
@whattittdoo1522 Жыл бұрын
Will this fit on a keep wrangler sport? Will it also fit with a stock back bumper
@Steely33 Жыл бұрын
I don't think these will work with my Rough Country Front Adjustable Vertex Shocks
@davepersonal9082 Жыл бұрын
Honestly, I kind of feel like this video was posted to say "not all bolts break".....it was LITERALLY a video where I watched a guy use a ratchet 3 or 4 times and all went fine. If you do even a cursory google search for "JL broken body bolt" you get tons of examples showing the actual problem happening. Yeah -- "take your time" and "turn a few turns out then back in , rinse and repeat" is correct.... But I feel like you guys are trying to sell something and you are trying to convince folks this isn't an issue.....it IS...plenty of folks experiencing broken bolts....many have taken the advice you give and they STILL break....so I think this video does a bit of a dis-service. Just saying.
@mrmgjohnson Жыл бұрын
Sweet, if possible, add some footage of the completed installation. It would be great to see the whole vehicle with the new doors. Great installation instructions, simple to the point. Thanks for the content.
@dbwd85 Жыл бұрын
Which light bar is that
@JTRSpartacus Жыл бұрын
I just installed these. I couldn’t get to the front bolt and ended up zip tieung the front. I had something blocking access to the top of that area ? #JTRSPARTACUS
@TrailExpedition Жыл бұрын
Is it the same install on a JKU? I’m running a long arm kit and need sliders that will work with that.
@jacksonspencer238 Жыл бұрын
$500 is robbery
@inkvested8658 Жыл бұрын
Dope product but before yall look it up. It's $785...........
@groberts1980 Жыл бұрын
I'm interested in flipping the sway bar, but the flip kits I've found are $54. For a bolt. And washer. $54. I'm genuinely going to take out the small 15mm bolt and head up to Ace Hardware and find the right length and threads to do this. And it will cost me $2.50.
@zachturner17522 жыл бұрын
Mine broke. POS
@jamescantwell91722 жыл бұрын
How did you fix? I have two broken now.
@zachturner17522 жыл бұрын
@@jamescantwell9172 For a temporary fix I use an anchor bolt in the mount that drops through from the top. I am going to try to remove the bolt this weekend with a torch and left handed drill bit / easy out. Ill let you know if it works.
@FrickinJeepSquad2 жыл бұрын
Thanks for the vid! Looks like a great kit.
@xxfire072 жыл бұрын
I will have to pass on these.
@KeithBickford2 жыл бұрын
I can’t even budge mine with a 1/2” impact on high. One came out. The rest won’t budge.
@quincy1892 жыл бұрын
Once these fenders are install do you need to remove them to switch shocks or coil springs? If you wanted to get a lift later on
@romeojrquibar16912 жыл бұрын
Hey man, my friend broke the last bolt on the passenger side. Have u ever tried removing one? If so. What tools did u used and can u please post a video? Thanms
@rkendsley75612 жыл бұрын
Can the plate mount be attached upside down? So the Camera is on top and light on the bottom facing up? Looking for a way to move license plate, as well as, be able to use rear camera when I attach a trash bag, such as the Trash-A-Roo to my rear wheel.
@ACEEngineeringandFab2 жыл бұрын
No. The camera is at an angle pointing down....if you flipped it, it would be pointing at the sky. You may have to look into the mesh trash bags like the Steinjager Trashy Teddy that you may be able to mount lower than the camera level
@charlesmcdonald71562 жыл бұрын
Unfortunately this carrier will not accommodate the stock rims with 12.5" wide tires. Wish I would of known this before purchasing and installing. Won't been able to use it until I purchase rims.
@mcm64532 жыл бұрын
Will this go down in price? Or have prices surged due to COVID shortages? I remember it was listed for around $800 on your site, now it’s listed $1,499.99.
Has any one else attempted to mount these and have fitment issues? Only about half the holes line up the others are about an 1/8 inch off I’ll have to bore out the body holes to make these work almost thinking my buddy got a JK set? Idk
@LarryRichelli2 жыл бұрын
These are the most expensive of all the JL aftermarket fenders! Can I buy your stock fenders. I have a new white rubicon
@arshsinghx3 жыл бұрын
it looks ugly
@TRD_Cueto3 жыл бұрын
Link to the led light used? I'm considering these inner fenders for my JKUR
@SakimikeRenehan3 жыл бұрын
Some suggestions. 1. Black bots and nuts with locking back. 2. The front light looks like a funky eye.
@Georgia4Low3 жыл бұрын
Need these! Love the “running board” look/step with integrated rocker guards.
@paulbrowning17583 жыл бұрын
Side marker lights are junk. Lasted a year.
@Verb1303 жыл бұрын
Nice install video, but I don't like the small coverage of the aftermarket fender. Just my personal preference.
@vishnuearns3 жыл бұрын
Awesome.. I struggled enough looking for a product which will help me retain my stock sliders and this is it. Wish I could see the accessibility part and how it will look from different angle. Thanks for the product.
@lonewulf03283 жыл бұрын
Just got mine today. Any tips for getting the front bolts loose? From what I had been reading, they are on with Red Loctite, and I tried mine earlier with a 1/2" breaker bar and couldn't get it to budge, even with all my weight pulling back on it (with my feet planted against the back of the passenger tire). Do you think heat would be safe?
@ACEEngineeringandFab3 жыл бұрын
Heat won't hurt any.
@casey1979303 жыл бұрын
Whish hadn't just ordered this before finding out there's zero install or reviews..funny suspension it's going to be a giant pain in the ass. Should've know better when this video was labeled "instalation video" and clearly isn't even the current model.
@ACEEngineeringandFab3 жыл бұрын
The part itself just installs with the factory bolts from your stock tire carrier, it is very simple.
@kj7lvl7443 жыл бұрын
Is there a video for the lights?
@ACEEngineeringandFab3 жыл бұрын
Hi Jason - no we don't have an install video for the lights as we leave that up to the customer to wire as they choose. We generally just wire the lights in the Night Runners as well as the fender well Rock Lights to an aux switch. As far as mounting them, there are just tapped gussets on the interior of the step portion that they bolt to. Thank you.
@kj7lvl7443 жыл бұрын
@@ACEEngineeringandFab thanks! :)
@KevinPinto3 жыл бұрын
What is the weight of a pair of these rails?
@ACEEngineeringandFab3 жыл бұрын
They weigh 112 lbs per pair.
@ctcourtking3 жыл бұрын
Great video. I’m thinking of purchasing my first Wrangler. Seller says she needs Shock Body Mount Replaced. What purpose does the Shock Body Mount serve? As a motorcycle guy, just not sure what this parts does or how safe the vehicle is with/without this repair done immediately.
@miopera40 Жыл бұрын
Don't buy a JL if you want to keep it for long time, galvanic corrosion where the aluminum body bolts into the frame, just like in the doors but this one might kill you.
@chrislazarine97053 жыл бұрын
Best looking tube doors I’ve seen. I’ll definitely have to keep an eye out for any sales or promotions. Can’t wait to add these to my JKU Rubicon!
@ACEEngineeringandFab3 жыл бұрын
Chris - they are $140 off + Free Shipping this week. Free shipping code is "STIMMY" and the $140 off is automatic. Thanks!
@stevenchris35263 жыл бұрын
Hi I just installed mine the day time running light is not lighting up only the turn signal not the day time running light
@ronm77813 жыл бұрын
if you don't have air impact tools - how do you tighten them - I am worried about crossthreading them or snapping the bolt heads off - and I have a wicked rattle on the passenger side now. LOVE them on my JKU - frustrated with the JL install due to the rattle.....THX
@ACEEngineeringandFab3 жыл бұрын
Air tools help, but these can be tightened with a ratchet and breaker bar as well.
@Iamkraze3 жыл бұрын
What size is the large bolt that draws the tire in?
@ACEEngineeringandFab3 жыл бұрын
It is a 5/8-11 x 4.5" fully threaded.
@Iamkraze3 жыл бұрын
@@ACEEngineeringandFab thanks! Needed to order a socket.
@seven3llc3 жыл бұрын
Hello I really want to buy this product but before I buy I need yo know how strong the rock sliders really are another company claims you can use a high lift jack to lift one whole side of the jeep using the rock sliders is this product as strong?
@ACEEngineeringandFab3 жыл бұрын
They are very strong and can easily be used as a jack point.