thak you so much your xplanation about how to serve the wifi signal and it can be work well after i did that once again am from indonesia

ets una gran bendició. la le meva Mare de 78 anys té aquest telefon exactamente el mateix problema. moltisimes gràcies Sir

moltes moltes gracies. desde Cataluña

moltes gràcies amic❤❤❤

Where GPS chip is hidden..!!

Awesome bro no mofs arround internet able to fix it up they just fkn kids giving some setting tips like turn on leave cation and turn off battery saver Assos. Bang on solution

Worked for me also. Phone repair shop could not fix it despite 3 trips. I used copper adhesive tape instead. adhesive is conductive also.

pang regae boses mo lods

don't have wifi on mi xiaomi mi 8, after screen replacement, everthing else work just fine... suspecting this is the problem but after dessasambly the xiaomi mi 8 have lots of pins that conect parts of the motherboar to the housing, don't know with one to chek

This pin was missing on my phone after the fight to get the case open. A blob of foil fixed it. Brilliant. I also fixed my poor Bluetooth signal too. There were two damages foil contacts as you described for the GPS fix. I assume the other was for Bluetooth as everything working now. 👍

Excellent. Thank you for sharing. My problem was poor Bluetooth so I thought I would look at what you had done and see if there were any more bent pins. There should have been a foil contact strip on the new screen to attach to the GPS, but that was missing on my screen. I had also noticed a second tab missing which connected to the same copper square. It's just the other side of the camera in the corner. I added foil to both of these pins and my Bluetooth is fixed. GPS works too but I was not aware if that was faulty. I also noticed that when WiFi contact spring was missing so that got a blob of foil too. WiFi working too. Brilliant. I am reassured that had I paid the repair shop that did the screen replacement video, to do my screen, that their GPS and Bluetooth would not have worked either. Those two foil strips were missing on the video too. I love my mimax2 even though it is 5 years old. Thank you 👍

Excellent thank you. My Bluetooth was weak after a new screen, so I know likely problems to look for 👍👍

I have same issue after screen change

I have this issue with my GPS and Bluetooth after replacing my motherboard. Gps doesn't work, Bluetooth keeps crackling when connected to a device.

Thx bro! Fixed!

thanks for that, I fixed my GPS

Yes , its working tnk you much

Gracias por el consejo amigo. Me valio perfectamente despues de cambiar la pantalla a mi Xiaomi Mi Max 2. Brillante! Thanks for the advice friend, I was perfectly worth it after changing the screen to my Xiaomi Mi Max 2. Sparkly

I had a GPS problem after replacing the broken screen on my Xiaomi Mi A2. A Google search led me to this video, which gave me the idea to look for a missing antenna. It turns out the new screen with frame is too cheap to include all the parts. You can confirm if this is the cause of your problem by comparing carefully the broken old screen with the new one as I did. My new screen's frame is missing two antennas near the left and right edges at the top. I believe one is for the GPS and the other is for Wifi. The antennas are on small plastic tabs glued to the frame. It was easy for me to remove them from the old frame with tweezers and put them on the new one. After this, the GPS worked flawlessly and the Wifi stopped having intermittent dropped connections.

Can we use copper foil instead of aluminium foil?

If this method didn't work,pls try another one -> GPS weak fix method by this channel, I did it and it solved both of my problem, GPS and WiFi weak, thx 😁

Worked perfect! I try to fix WiFi and gps weak after lcd replacement. Try another method for WiFi,didn't work,but this GPS method by you fix both of my problem,thx 😁

Thanks a lot. I was very very annoyed by this problem that I was going to replace my phone.

very hepful.... thnx

Will this fix GPS and Bluetooth issue as well?

Hi bro, do you can help me ? Could you check what voltage reaches the L600 coil with the device turned off, but with the battery connected to the board ? i.postimg.cc/pR8zVW6w/564654654.jpg

Thank you sir Its really work Now i can get back my digi and celcom. Thumb up!!!

Can you please tell me the location of the Bluetooth antenna in the redmi note 4.

Hey man, my phone is Xiaomi Mi 5S Plus and your solution worked fine for me too. Thank's bro!

Thanks bro

Thank you brother. Good solution.

Briliant bro.. Will try out..

In my case I have not needed to put the aluminum foil, it has only happened that the connection that comes out through the hole of the screen had been lifted, so it did not make contact, it was only put it in its original position so that the pins can make contact, and the GPS has worked again. Anyway I would never have found the solution without your video, thank you very much for sharing. The GPS of the Xiaomi mi Max 2 is very very good, it always displays a minimum of 20 satellites.

My gps stoped working on my Mi A2 after I replaced the screen..

Thank you sir for this information

It worked just like a charm thank you. Before doing it like you I notice the original connection actually goes under the case (below the screen) and come up by a hole. It ripes pretty easily be careful when you change the screen. One more time thank you mister.

I just changed the display but it's going yellow

My mi max 2 magnetic sensor not working, how locate this sensor on motherboard and how to repair it ? Please reply

Türkçe alt yazı olsa iyi olurdu

Worked perfect Denis ! Thanks for your advice. :) I used ordinary aluminiumfoil from the kitchen.

I am facing Low GPS and No wifi signal problem after replacing my Mi max2 screen . I will try your fixes though. Thanks man for sharing this. 👍

same problem with my Mi 8 phone. No GPS after replacing screen. I'll take to the repair shop and show them this video

Great tip - that fixed my problem - I used some isolated thin wire to connect the big copper foil to the very small foil sticking up from the camera hole (some soldering involved) - looks like the small foil would normally be attached to the copperfoil but got torn apart

It works, thanks!!!

I tried your GPS fix and got a good result. I was going try this WiFi fix also, but I was worried about the foil being across the back of the battery, so instead I tried to lever the pin up to create a better contact. I had poor light and weak glasses so it was hard for me to see, but something "snapped" when I levered the pin, and it popped up higher than it should have. However the pin was still connected so I put the phone back together and everything still works. Phew.

Is the pin on the phone there normally or is there? Will I put the pily on the battery cover and cover that little square?

Hi Denis, after I replace my LCD screen I had the same problem with the GPS and also mi WIFI lost a lot of power, I can only use WIFI a few meters from the router. Do you thinks that this solution is suitable to me?

Since I replaced my Mi Max 2 screen, my GPS still works but the errors are up to 40 metres and can be quite erratic with unusual zig zags when I am tracking my cycling. Was that the same as the problem you had with GPS?

Dont work for me 😔. And my problem is the same. After replace the touchscreen... Any suggestion?

thanks bro, A strange but completely working solution.