Thanks for the update on the Unicorn. I am surprised as I had thought the previous owner kept up with the maintenance religiously. I know maybe things spiraled more and more as that always happens.
@jonyrho3 күн бұрын
For the most part up to date yes but it has due for quite a bit after I got it. There was also a lot of questionable work done previously but who knows when that happened
@redeclipzegsx2 ай бұрын
These are the EXACT wheels I want. Same gloss silver, same size and offset and pcd. Can you direct me to where you purchased so I can get them also?
@jonyrhoАй бұрын
You can order them through ICB Motorsports directly. I went through my parts supplier First Gear Project and they ended up getting a better deal for me though depending on where you're located
@chineseprincess-582 ай бұрын
Do you happen to have a photo or video of the stock spec set up of 17x9 +63?
@jonyrho2 ай бұрын
Stock suspension?
@chineseprincess-58Ай бұрын
Yes, for stock suspension on s2k. 🙏🏼
@jonyrhoАй бұрын
I unfortunately don't but you might be able to find some else online via S2Ki. From what I remember, on stock suspension it should be pretty flush with the edges of the fender
@chineseprincess-58Ай бұрын
@@jonyrhothank you! I’ll look thru the s2ki forums again
@jayyyycee2 ай бұрын
Finally someone with a TC4 review and mount on the s2k at least, even if it didn’t last long and isn’t gonna be ran lol 😅 I just want to ask, you’re saying that spec on the TC4 will fit the stock height fitment? Also , I have an ap1.
@jonyrho2 ай бұрын
Sad thing is the replacement wheels for these I didn't even run either because I got the opportunity to jump on a dream set of wheels. Yeah at stock height they will "fit" but would likely poke out. If you're not planning on doing any lowering, I'd go with something more conservative like a 17x9 et63
@オートレックエンタープライズ2 ай бұрын
Do you have the miles speedometer ? Searching for one
@jonyrho2 ай бұрын
Unfortunately the speedometer I bought ended up being defective so I have my USDM installed again. Where are you located?
@TerraNosOlhos2 ай бұрын
Waiting to see that hardtop complete! Love it.
@jonyrho2 ай бұрын
Me too! Still waiting on the rear glass though
@proraceer072 ай бұрын
Damn this is awesome. I wouldn’t get the CR tonneau cover with the amuse top it could limit your view in the rear and you essentially have an expensive mugen top
@jonyrho2 ай бұрын
That's a pretty good point! I'm potentially just thinking of going with a half cage and deleting the soft top
@frankblack70702 ай бұрын
Handy! Just waiting for my relay, thanks for the walk-thru
@jonyrho2 ай бұрын
Glad you found it useful!
@brunostiglitz75352 ай бұрын
Love the wheels, I have the same in white. Did you have to deal with re tightening the torque in the lug nuts for a few days ? The lugs don’t hold if under torqued. ?
@jonyrho2 ай бұрын
I typically will do a retorque after 100kms of driving but typically don't have any issues with the lugs backing off. What lug nuts are you using?
@brunostiglitz75352 ай бұрын
@@jonyrho not sure what they’re called but they’re some pretty strong forged steel lug nuts with the special multi hex key
@jonyrho2 ай бұрын
Maybe to a quick clean off the lug nut there and the studs to get off any potential oil or lubricant
@milan.vukovic3 ай бұрын
Congrats on the Hardtop ! I've also got a genuine Amuse (now R1) Hardtop and just today started working on it. On my Hardtop I had to remove the rear Softtop moulding as for some reason it sits on top of it and has a huge gap to the body. Mine also looks very hazy hopefully a polish will take a care of it.
@jonyrho3 ай бұрын
A friend actually sent me your post on the Facebook group! I haven't test fit mine yet but will soon to see if I have a similar issue. It's unfortunate that we spent a sizeable amount of money to face an issue like that :'(
@milan.vukovic3 ай бұрын
@@jonyrho Yes its unfortunate, I initially wanted to get a Mugen Hardtop but that was right around that time when they were discontinued, so the Amuse was my second choice. Its still the best authentic Hardtop you can get imo.
@Loopyspec3 ай бұрын
I’m stoked about project S2000. Looking forward to more content!
@jonyrho3 ай бұрын
Appreciate that!
@battlestorm14283 ай бұрын
Aren’t these 10k?😭
@jonyrho3 ай бұрын
Retail is around 10k USD but my parts supplier got me a wicked deal
@Endlessways133 ай бұрын
Love your videos! I didn't even know this hardtop even existed. I would definitely prep it and get it cleared for protection. As for the inside I would definitely have it finished and cleared also for aesthetics. I bought my OEM hardtop for $6k usd several months ago in Berlin Black and it seems like the prices only keep going up. I love the OEM rear window too so I went OEM. I was close to getting a double sided CF Mugen hardtop but those are going for $10k. I'm excited to see what you do with it in the future and good luck!
@jonyrho3 ай бұрын
Appreciate the kind words! Yeah it's a fairly uncommon route so lots of people don't know about it. The going rate for an OEM top here is between 8-9k CAD. CF Mugen is an amazing option but still can't beat OEM visibility.
@KevoF063 ай бұрын
Nice! I’ll trade you my s2000 hard top with low miles, plus 15k for that beauty? 😜
@jonyrho3 ай бұрын
Would be tempting if I already didn't have an S2000 haha
@RealWheelDeal3 ай бұрын
I need to refresh mine. Really good video.
@jonyrho3 ай бұрын
Thanks Peter!
@iivv_nn3 ай бұрын
if you have a motorcycle drain pan and are skinny. You can do this without lifting the car,
@jonyrho3 ай бұрын
Probably at stock height! Can't imagine doing this on my current s2000 without lifting it lol
@iivv_nn3 ай бұрын
@@jonyrho Oh yea, depends on how low it is. But I do mine withhout lifting it
@thisguy0923 ай бұрын
Where did you get that front badge?
@jonyrho3 ай бұрын
It's a sticker that was put on by the previous owner. I think it might have been done by a local shop but it's an S600 style badge
@rideroll96093 ай бұрын
Same like SRS R60 for FN 2 in low rpm it got normal sound level and with speed it comes alive. 👍
@jonyrho3 ай бұрын
Gotta love the two personalities exhausts!
@shreddbunnie3 ай бұрын
❤❤❤
@Eufawria3 ай бұрын
New Craftsquares come in black bases. Pretty certain you mounted the mirrors backwards, and forgot the rubber gasket as well
@jonyrho3 ай бұрын
Good catch! I realized I mounted them backwards when I was finalizing the mirror positions. Rubber gaskets were installed but I didn't show the entire process. Didn't know the new ones come with black bases now though
@Eufawria3 ай бұрын
@@jonyrho Only know because I wanted to change my current Craftsquares with ones with blue lenses and the website says it comes with black bases. It came in last week but not keen getting my hand up the speaker hole to undo the nuts
@jonyrho3 ай бұрын
Definitely the worst part of the install and removal
@onetapman26124 ай бұрын
bro how much oil is that thing burning?
@jonyrho4 ай бұрын
I mean if it were burning oil, it shouldn't disappear when I started rolling...
@onetapman26124 ай бұрын
@@jonyrho how does that makes any sense?especially with this engines,which are notoriously unreliable and famous for burning oil
@billb86004 ай бұрын
Great video. Thanks. Two things I learned ( the hard way ). Make sure you connect the blue antenna adapter wire to whatever blue wire is coming off the radio. Also, those plastic trim removal tools are invaluable for getting that upper vent cover off.
@jonyrho4 ай бұрын
True! I used to have a set of plastic trim removal tools and it makes the job a lot easier!
@sbrave4 ай бұрын
What about the steering wheel controls for volume and different modes? Does your CRV not have that?
@jonyrho4 ай бұрын
LX model so no steering wheel controls
@sbrave4 ай бұрын
@@jonyrho Thx!
@tonykartracer80324 ай бұрын
Are you gonna add a rear diffuser as well?
@jonyrho4 ай бұрын
Great question! I had initially thought about running my previous Voltex diffuser but ended up trading a friend for some other work. The ASM option doesn't really look that great in my opinion so might stay diffuser less for now and see what I end up deciding later down the line
@jwrx7tt014 ай бұрын
How do you use rear tow hook/strap with this bumper?
@jonyrho4 ай бұрын
Factory one can't be used unless you drill a hole through the bumper. I plan on using a custom tow strap set up. ASM does make a tow for the rear bumper that mounts onto the JDM crashbar too
@bige71864 ай бұрын
I have the j’s racing rear bumper along with the front as well, this would be my second option if I didn’t get the js
@jonyrho4 ай бұрын
Oh the J's racing options are sweet too!
@kimlevi444 ай бұрын
Babe wake up, new jonyrho vid just dropped!
@jonyrho4 ай бұрын
Haha thanks man!
@imoladreams4 ай бұрын
ASM Super Saiyan
@jonyrho4 ай бұрын
Kind of haha
@S2000hernia4 ай бұрын
Nice set up bro looks badass
@jonyrho4 ай бұрын
Thank you!
@ryanpimental89965 ай бұрын
Are these eBay knock off?
@jonyrho5 ай бұрын
Yeah totally Rotas
@mexiricersgarage5 ай бұрын
Thank you for the shout my man 😃😃 wheels look incredible! Did you ever dial in ride height and camber?
@jonyrho5 ай бұрын
Wheels look incredible thanks to you! Not yet! Getting the trans and engine rebuilt/refreshed right now so I'll be getting fitment dialed in afterwards!
@qcTOOL5 ай бұрын
Nice wheels! I was hoping to see what your bike was😂 I guess we have similar taste, S2000, MTB… 🤘
@jonyrho5 ай бұрын
Thank you! It's a Canyon Spectral 125! I find a lot of car guys are also into some kind of more extreme sport such as mountain biking, skateboarding, skiing that we did before we got our own cars
@qcTOOL5 ай бұрын
@@jonyrhothx for the info! Nice bike! Funny, I had the Spectral Mullet (160/150) 2 years ago! Was a blast👌 We have a few pretty gnarly trails around here and decided to switch for a Niner WFO RDO9 (180/170) also an awsome machine. Cheers🍻
@gliderism5 ай бұрын
I was thinking of running TC’s on my EK! or either regamasters. Both look great one looks more futuristic and the other classic
@jonyrho5 ай бұрын
Honestly can't go wrong with either option in my opinion!
@zaahidrahman5 ай бұрын
great looking wheels with an even better back story. any idea how many sets were actually produced?
@jonyrho5 ай бұрын
I'm not completely certain but what I could find is that ASM only commissioned 40 sets of these wheels!
@zaahidrahman5 ай бұрын
🥵🥵🥵
@tavitoxs5 ай бұрын
Mazda 3 . Primera generación UNA MARAVILLA. ❤
@JDWURKS5 ай бұрын
☠️
@Bosstjm35 ай бұрын
what wheel is on the car?
@jonyrho5 ай бұрын
Enkei NT03RR
@Bosstjm35 ай бұрын
@@jonyrho Would you get the ballade sport type s if found for $650? I worry about drone and quality of product
@jonyrho5 ай бұрын
Honestly, I probably wouldn't now since there's issues with the muffler section inners with their weld. Sound wise it was quite good with little to no drone. I would support better companies than Ballade Sports imo
@Genome00015 ай бұрын
TIL about Clearways ASM - Did you make any modification on the fenders?
@jonyrho5 ай бұрын
Fenders were already flat rolled for my previous wheels and rear fender tab relocated
@HOTDOGFLAVORWATER5 ай бұрын
Broooo they are amazing! Where did you manage to find them? Been looking for a set for ages!
@jonyrho5 ай бұрын
Got a tip from a friend about someone who had a set but didn't list them for sale yet! Hope you can find a set!
@Endlessways135 ай бұрын
My dream wheels...
@jonyrho5 ай бұрын
Definitely dream wheel stuff!
@donnietai92485 ай бұрын
As always another top notch video!
@jonyrho5 ай бұрын
Too kind Donnie!
@quest87955 ай бұрын
Hell yeah, nice
@jonyrho5 ай бұрын
Thank you!
@BicboiL5 ай бұрын
Damn sick. Looking for a set as well to replace my workmeister S1s. Maybe I’ll ask Kanayama San if he ever plans to produce them again
@jonyrho5 ай бұрын
When I was in Japan last year I asked and he said due to the increased costs from BBS, there wasn't any plan. I'm sure if enough interest was there, it might be reconsidered!
@qwebl6 ай бұрын
cant wait to pick up a set of super brights regas for my car
@jonyrho6 ай бұрын
Super brights came out a little bit after I bought these wheels and they look amazing!
@milan.vukovic6 ай бұрын
From where did you get your Helmholtz resonator ? I've bought the same ASM 70mm early version and want to add one.
@jonyrho6 ай бұрын
I got it built from a local fabricator. I had used my old Ballade Sports exhaust as a template for the Helmholtz resonator
@TforTouge4 ай бұрын
@@jonyrho Would you care to share the measurements of where the Helmholtz resonator is? I see a v1 locally as well, and I'd be interested in adding one.
@MrNotch656 ай бұрын
Good video i never saw you reconnect the grey plug #8 that you removed in the beginning. Did you reconnect it? Thanks
@jonyrho6 ай бұрын
Yes reassembly should be the reverse of the steps at the beginning so the #8 connector would be plugged in again
@lalolalo12336 ай бұрын
Question, my existing radio has an anti-theft red light on the upper left side. If I replace it with a carplay headunit would it work?
@jonyrho6 ай бұрын
I believe it's just an indicator but system should still work
@lalolalo12336 ай бұрын
@@jonyrho Good to know. Thanks for clarifying.
@Rasec11206 ай бұрын
Berlina Black is the best if you have a garage lol.
@jonyrho6 ай бұрын
And if you never drive it haha. Looks good for the first 5 seconds after a wash
@Rasec11206 ай бұрын
@@jonyrho Dude, tell me about it. My driveway is right next to my neighbors and they have a dirt driveway. I wash and enjoy it for 5 mins before it’s covered in dust again lol.
@jonyrho6 ай бұрын
Yeah my garage is onto an unpaved alleyway. I literally get my car dusty the moment I leave the garage :(