Wish you supported Teensy has i have 40 of them in my sim already but I’m on XP and want to switch to msfs2020 Great software by the way
@Gianluca1973Folletto5 күн бұрын
hi, I can't use it with the logithec panel, yet I read somewhere that it works
@noahaviation47176 күн бұрын
Intersting video! I myself have just bought the WinWing Airbus FCU and I would like to configure it to my FsLabs A320 and Aerosoft A330! I got a bit confused where you talked about "modules" what is a module in the mobiflight?
@chrisearlyup11 күн бұрын
Hi. First of all thanks for the great video. I learned a lot following along. Now I'm trying to transform it to a radio panel. I git the point where I can display the Com Frequencies like so: C1 123.456/123.456 C2 123.456/123.456 But now I would like to have the indicator behind the lines so I can change which line I'm manipulating. Can anyone point me in the right direction. Thanks
@tangocharlie929117 күн бұрын
I’m trying to illuminate a “gear in transition” light. My thought is to associate it with the Left gear light (it is consistently the last of the three gears to extend, in the JustFlight Piper Arrow), and set it to “1” when the gear is extended anywhere between 1 and 99 percent… but I don’t know how to input that in the conditions… any help?
@scottb721Ай бұрын
Awesome. Rebuilding my cockpit atm and will switch to Mobiflight. Does all gear have the same percentage during transit ?
@FreeDom-cv8dwАй бұрын
Thank you for the software but it says "No modules were found" can you help me?
@MobiFlightАй бұрын
please join our Discord for such support
@geofferyshanen7758Ай бұрын
I’m starting my journey to improve my sim and build so components. Your tutorials will help me huge. I am a retired commercial pilot with over 20,000 pic hours mostly in turbine aircraft. Thanks again awesome!
@d3v1ls51Ай бұрын
Is this video still applicable today as I do not have an events.txt file in either location ?
@MobiFlightАй бұрын
no, it's not needed anymore. you can select from the presets and edit them on-the-fly or create new ones
@inagerliАй бұрын
Hi, is a autothrottle output with all airliners of MsFs2020 possible or only the aircrafts listen in your tool? Thx !
@anonharingenamnАй бұрын
When I edit my eventsid file I see no change. Even if I delete an entire section (and restart mobiflight, of course) I still see the "vendors" I deleted.
@ArduinotipsАй бұрын
how install simconnect?
@SamwiAmsАй бұрын
does mobiflight can work with MUX or multiplexer? do you have video for it?
@dannyvr12252 ай бұрын
Nice video, thanks a lot. I am looking for a command in mobiflight to make the annunicator lights work with a LED of A/P P/RST button in a PMDG B737. The found command for pmdg B737 (Avionics: PMDG B737 A/P P/Rst) does not light up the led. The command for the button itself (Avionics: PMDG B737 A/P P/RST Button) does work... The same goes for A/T and FMC....Any idea?? Thanks in advance for a reply.. 🙂
@nigelmtb2 ай бұрын
I'm a late comer to Mobiflight but I am all in. Your work is incredible!
@_PSantos2 ай бұрын
So late...my God....! I wanna take a ride!
@aliozde2 ай бұрын
I can't wait. When will it be published?
@nelsonicibaci2 ай бұрын
Excelente video
@nelsonicibaci2 ай бұрын
Porque no meu MF o Sim status não fica verde, faço tudo certo testo o led parking funciona, mas quando clico em RUN aparece um alerta vermelho do lado esquerdo e diz que o sim conect não está conectado
@episystemik3 ай бұрын
Dope. Miss your vids
@brisbaneengineer76503 ай бұрын
03 JULY 2024 - I have latest versions of Mobiflight, and trying to have it find custom datarefs in payware aircraft eg CowanSim H125/AS350. Mobi finds all the standard X-plane datarefs, but cannot see the custom refs as are visible with the dataref tool (xplane plugin) what is the best way to use mobiflight and the custom datarefs/commands that come with payware ?
@NOOBGAMER-or5ze4 ай бұрын
Make a video on how to configure the Throttle, Speed Brakes, Flaps and Reversos on the Xplane 12
@NOOBGAMER-or5ze4 ай бұрын
Make a video on how to configure the Throttle, Speed Brakes, Flaps and Reversos on the Xplane 12
@episystemik4 ай бұрын
Genius
@Bastelhirni4 ай бұрын
X-Plane 11 does not connect to Mobiflight. Are settings necessary in X-Plane? Mobiflight, X-Plane 11 and DataRefTool are up to date. Mobiflight shows a yellow triangle in Sim Status.
@jan-philipphammer39154 ай бұрын
NIce work. I will use it on an A230 LG panel soon
@tiger1903484 ай бұрын
Hallo Sebastian, ich weiß, dass Fragen nur noch im Discord gestellt werden können. Ich bin dazu zu doof und begreife es einfach nicht. Ich habe ein A 320 Cockpit mit 15 MFs gebaut, würde aber auch gerne mit einer Cessna fliegen. Kann ich mit einer weiteren Arduino Mega nur für die Cessna die Anzeigen des A 320 nutzen, indem ich neue Kabel von den Anzeigen zur Cessna MF verlege und konfiguriere. Gruß Klaus
@HenderikSteenberg4 ай бұрын
Hi will it be possible in mobiflight to use a single rotary encoder with extra button to convert to dual rotary encoder?
@kartal23394 ай бұрын
i tried this many times in 10.2.2 but i couldnt make ... something chane for new version?
@Paul-iy9fr4 ай бұрын
Great tutorial, thank you so much.
@coriscotupi4 ай бұрын
Cool presentation, powerful product. I tried the parking brake example, LED + switch, and it worked fine. So here's a question - does the MobiFlight PC application need to be running in the background, or is there a way to upload all the functionality to the Arduino board, so that the host computer running FS2020 wouldn't need an additional program when actually flying?
@coriscotupi4 ай бұрын
Hi All, please bear with me for one most basic question: Once the configuration is set configured and uploaded to the board, is it necessary to run the MobifFight software in the background when using the hardware device with FS2020, or will the device run on its own, with the uploaded firmware and no external program running in the background?
@frasenci4 ай бұрын
Facinating system. Superb presentation. So pationate ! Thank you very much. I will shurely give it a try.
@ea-tt4 ай бұрын
😁
@brettmaxwell13605 ай бұрын
Hi hoping someone can help me, I'm extremely raw at mobiflight I have downloaded Toliss Aircraft profiles for the Winwings FCU but have no idea how to load the files into Mobiflight. I have put the Xplane 12 Toliss files in a folder on the desk top, but how do I upload the files into mobiflight ? and do the go in the input or output ? also what are orphaned Serials ? is there a decent video to show how to upload the files? thank you in advance
@selidikilitas38585 ай бұрын
Super... Alle nicht Englischsprechenden sind auf diesem Kanal in KZbin ausgeschlossen, weil alle das Bedürfniss haben, ausschliesslich Englische Videos hochzuladen, weil dies ja eine Weltsprache sein soll, so die Begründung. Schade.
@dannyvr12255 ай бұрын
thanks for the video :-) Could you perhaps tell me where I can find more information about the hubhop rpn tool, what it is for and how to use it? Looking for a solution to use a potentiometer to operate Flaps (9 positions) over only 90° instead of the full 280° of the rotation option... Thanks in advance
@Izmael13106 ай бұрын
Can I use this for mapping LNAV and VNAV toggle to a joystick (hotas) which I bought? MSFS does not know command for LNAV neither VNAV so I cant assign it even if I use non homemade device :) Thanks.
@NickWilmans6 ай бұрын
FSUIPC requires programming and script understanding skills. That's why it's better and easier not to use FSX or P3D
@MobiFlight6 ай бұрын
we also provide presets for FSUIPC which helps to get started. in general though you're right - it's easier for msfs2020 and xplane
@NickWilmans6 ай бұрын
@@MobiFlight Yep. FSX and P3D are obselete. I'ts requires also multiple connected computers and multiple licences for FSX or P3D. A lot of installing, calibrating, alignment software for multiple monitors. MSFS and X-plane are easier and users friendly if oy want to built a cockpit.
@pdep6 ай бұрын
Nice presentation. No fluff and great content. Thank you.
@MobiFlight6 ай бұрын
thanks for the feedback
@LucasAlves-qr6ji6 ай бұрын
O know MF does not support OLED displays, but is there any way to send something like raw information from MF to a board (via serial or i2C) and then on this another board make the arrengements for the OLED display?
@ahmadshaweesh-kn4yy6 ай бұрын
Hello thanks for this detailed video , but how can I do this for SSG B748I xplane 12 , the output is ok , but if I want to switch on the taxi light I will not find the command Ifind only the dataref ,which is unable to give input .
@MarkusPosch-wp5if6 ай бұрын
Hello, its not possible to install. Dowload failed, please run installer again or unzip manually. Thanks for you Help
@MobiFlight6 ай бұрын
i bet you're using win7 - what OS are you using?
@MarkusPosch-wp5if6 ай бұрын
@@MobiFlight hy, using win11
@MobiFlight6 ай бұрын
@@MarkusPosch-wp5if and you have internet connection?
@MarkusPosch-wp5if6 ай бұрын
@@MobiFlight of course
@MobiFlight6 ай бұрын
@@MarkusPosch-wp5if but the message means that there is some problem with the file download from github which the installer tries to do. you probably have a some extra antivirus software, not just windows defender
@KotLata7376 ай бұрын
Great tutorial! Is it works the same way for PMDG 737?
@MobiFlight6 ай бұрын
there are specific PMDG eventids available. So that part is different
@KotLata7376 ай бұрын
@@MobiFlight I found it and it works perfectly. Less than 6 minutes and all done! Donation on the way! Thank you :)
@MobiFlight6 ай бұрын
@@KotLata737 Thanks! I am happy you figured it out and thank you very much for your donation
@maxlewandowski8416 ай бұрын
Having trouble with the Fenix A320 Lights
@jetraid6 ай бұрын
Happy Easter.
@MobiFlight6 ай бұрын
Igualmente
@Nick-Taylor6 ай бұрын
These Mobiflight home cockpits builds are looking so realistic!
@MobiFlight6 ай бұрын
😂
@PilotStudd6 ай бұрын
Happy Easter!
@MobiFlight6 ай бұрын
Same to you!
@adk20286 ай бұрын
Thank you very much for your effort. The program is awesome. The more you work with it, the cooler it gets... Building the hardware for the msfs is no problem with this software. 5 Stars 😁
@MobiFlight6 ай бұрын
Thanks for this kind feedback!
@apachebcn6 ай бұрын
I made a reverse reactors with one button, but I need to do a toggle, for on/off I tried with if sentence, but not works. Any idea?
@MobiFlight6 ай бұрын
can you explain more in detail what you are trying to do?
@apachebcn6 ай бұрын
@@MobiFlight yes! thank you with a button press -> activate reversea press -> deactivate reverse press -> activate reversea press -> deactivate reverse like a light bulb at home now I have press button -> -16000 (>K:THROTTLE_SET) But i don't how to do with effect on/off i'm developer, but i not know this language