Getting Started 2023 - MobiFlight Tutorial

[@geofferyshanen7758]

I’m starting my journey to improve my sim and build so components. Your tutorials will help me huge. I am a retired commercial pilot with over 20,000 pic hours mostly in turbine aircraft. Thanks again awesome!

[@adk2028]

Thank you very much for your effort. The program is awesome. The more you work with it, the cooler it gets... Building the hardware for the msfs is no problem with this software. 5 Stars 😁

[@MobiFlight]

Thanks for this kind feedback!

[@leepateman35]

absolutely love this. i'm not the sharpest spoon in the drawer but i'm now connecting LED's, LED displays and buttons easily

[@MobiFlight]

That's awesome! I am always trying to make it easy for everyone.

[@Skinny-me]

Haha.. Sharpest spoon!.. Never heard that one, haha

[@frankyvercruysse3843]

@@MobiFlight I have been looking for 48 h. now for a simple command, battery witch on and off on release, it worked before until I shut down my PC, now nothing seems to work, and erasing everything doesn't seem to work either, will I have to buy a new PC to fix it?

[@MobiFlight]

@@frankyvercruysse3843 no. You don't have to buy a new PC. Just verify that your Arduino is connected, MobiFlight detects it, MobiFlight shows a working connection to the sim and is in "Run" mode

[@tlum59]

This is the BEST tutorial video I EVER saw. For the content, the flow, but moreover the PASSION that transpire from your being, might I say your Soul...... Thanks so much

[@MobiFlight]

thanks for your amazing feedback! i am happy you like it and you find it useful

[@rox1601]

Hey Guys, thanks for creating this. Finished my first Button-Box prototype EVER yesterday and everything workes just fine. Just some pushbuttons and switches but I had absolutely no clue about ANYTHING regarding electronics before. Took me overall about two weeks from the Idea to finish with about 2 days for building the box, 1 afternoon wiring and welding and 3 hours for setup...... and then again 2 hours for welding bad connections again😇 It was waaaayyyy easier than I thought! Although I'm almost a boomer 😉 Watched your video once full length and two times with skipping to points of interest. Thanks for your effort. Great stuff! Greetings from Bavaria

[@MobiFlight]

Thats awesome ! Good luck with building more stuff

[@almoghtarib333]

THANK YOU so much for creating mobiflight , I have built my overhead panal , engin switches all lights potentiometers etc almost evry thing for the FLY BY WIRE , now I am in the proces to finish the full mcdu , and here I would like to thank Jamie lione for all the help on the discord , when I asked him a question he replide in less than one minute with full info about the mcdu display screen even where to by it from , fantastic job from you and thank you very much

[@MobiFlight]

Thanks for your great feedback! Jaime is a great guy, our community is very exceptional in this regard - super helpful and responsive!

[@dannyvr1225]

thanks, thanks a lot, it's good that there are people like you who clarify things. thanks again :-)

[@libertine5606]

What a great video! So many times you have to hunt around, go through the persons "intro", just to find that it isn't what you needed. This one is professional quality!

[@joewendlandt]

Perfect speed of explanations. I appreciate you taking your time.

[@MobiFlight]

Glad it was helpful!

[@joewendlandt]

@@MobiFlight is it normal with the heading bug working with an encoder in the sim but not to have the animated knob turning? or is there something I need to do?

[@MobiFlight]

@@joewendlandt yes, that's normal - unfortunately

[@clsky2orion]

Hello, thank you for that very instructive video

[@bernienufc3166]

Brilliant, so looking forward to many more, thank you so much for this

[@MobiFlight]

you're welcome

[@jui79]

This is brilliant !!! Thanks a lot for this awesome tool!! Bought a better Hotas with much more buttons than normally and was searching for a way to use it with the autopilot. This option was not given by MSFS itself, hence this tool is insanely brilliant!

[@pdep]

Nice presentation. No fluff and great content. Thank you.

[@MobiFlight]

thanks for the feedback

[@tomb8430]

Man, I am super excited about this for my sim.

[@MobiFlight]

cool! Thanks for the feedbsck

[@arturchuprikov2304]

Great, just great, Sebastian! Looking forward other tutorials...

[@MobiFlight]

working on it!

[@terrybailey2769]

Thank you. A great beginners tutorial.

[@MobiFlight]

i am glad you say that!

[@exorcyst1]

This tutorial is very helpful for a noob like me! Thx!

[@MobiFlight]

thanks for your feedback

[@Darknes_say]

Guys, I adore you. You were able to give resources to make my dream come true. For a long time I could not make at least one switch work, but finally it worked. keep doing your thing ❤❤️‍🔥

[@MobiFlight]

You're welcome!

[@aledro32]

GReat tutorial. many thanks

[@richkapoor1696]

Fantastic Video. Looking forward to more videos tackling difficult subjects such as using servo motor to make left/right fuel gauge for c172. Keep up the great work.

[@MobiFlight]

ok. I will do something along these lines

[@DaveWrightKB9MNM]

I’m struggling with the other sim software getting it to work. I have tried MobiFlight but haven’t done so on a regular basis. It has advanced so much since I first got it that I feel I need to re-learn it. I really want it to work so I can get going on my projects! Thanks for all you do for us!

[@MobiFlight]

you're welcome! share your progress and don't hesitate reaching out to me

[@ericbaker8807]

This is awesome. My wife has a Arduino Uno kit from Uni that goes unused. I've recently gotten into MSFS 2020. And I have a 3D printer. I'm definitely giving a simple setup a try tonight. If I'm successful, I'm gonna pick up a Mega and design a simple autopilot console.

[@MobiFlight]

sounds like a great plan!

[@ericbaker8807]

​@@MobiFlight I was able to get a simple LED and encoder working in like 20 minutes. Your application makes the process very very easy. Bravo. This has opened up a whole new world of possibilities for me. Definitely earned a subscribe from me.

[@MobiFlight]

@@ericbaker8807 i am glad you found it so easy!

[@MobiFlight]

@@ericbaker8807 Thats awesome! ... and thats just the beginning

[@frasenci]

Facinating system. Superb presentation. So pationate ! Thank you very much. I will shurely give it a try.

[@marcoity961]

On the descriptions page, it would be very convenient to be able to move rows up and down. A million thanks to you Mark

[@MobiFlight]

very true! reordering, grouping, filtering github.com/MobiFlight/MobiFlight-Connector/issues/251

[@marcoity961]

@@MobiFlight Dear Sebastian, I don't know how to use issues. Should I create a issue? Mark

[@MobiFlight]

@@marcoity961 the issue already exists for reordering, you don't have to create a new one

[@marcoity961]

@@MobiFlight sorry I'm slow to understand 🥴, what should I do when I'm at the link you indicated ?

[@MobiFlight]

@@marcoity961 nothing - i just wanted to prove that I had the same idea already, just not the time to do it

[@marronnier17]

Fabulous piece of software and a great tutorial - thank you so much

[@MobiFlight]

You're very welcome!

[@_PSantos]

Great work. Maybe I´ll learn something now!

[@MobiFlight]

did it work?

[@_PSantos]

@@MobiFlight not yet... need time to start working on it.

[@Pmix_1]

Great tutorial, thank you so much.

[@johnnewton7893]

Thank you for making this much easier and more user friendly. I fly Zibo and have a full-scale cockpit and it never really worked right. I am slowly switching things over to Mobiflight. I had no clue and still have no clue how to code so this is getting easier by the month. ( EXCITING). Keep it going! :>)

[@MobiFlight]

thanks man! when you need help, just reach out via discord.

[@Ricardo27300]

Quel travail ! un immense merci pour ce programme génial ...

[@MobiFlight]

de rien!

[@episystemik]

Genius

[@AngelGonzalez-dr2is]

Estupendo video. Ya podían hacer algo parecido para las botoneras de Simracing. GRACIAS.

[@tiagovila2702]

Hello,the annunciators of the Overhead of the pmdg 737 for msfs are programmable with a preset on mobiflight?

[@MobiFlight]

yes, that should be possible. For specific questions please join our Discord and ask there mobiflight.com/discord

[@hangar2271]

Tx for the video.Hoping to see a full video seris of configuring Phoenix sim A320 as well

[@MobiFlight]

the problem is that their license officially doesn't allow to connect external hardware to the sim.

[@spothardware]

hey 👍 great.

[@MobiFlight]

thanks for the feedback!

[@garyfly8244]

💙💙💙

[@MobiFlight]

👍🏻👍🏻👍🏻

[@sky173]

This is amazing. I'm curious if this could trigger solenoids also (e.x. PMGD 737 startup sequence)? Thanks for sharing this. Great stuff!

[@MobiFlight]

Of course it could. People have built it

[@AdventureGutta]

Love the video 😊 thanks! Is there anywere I can check that I connected my switch and light correctly on my UNO board? The software dont detect my buttonpush..

[@alistairknott6075]

Very good thanks. Wish we could have seen the board setup, bit of a glass ceiling for using the software

[@MobiFlight]

Do you mean connecting the switch to the board pins?

[@alistairknott6075]

@@MobiFlight that’s correct

[@MobiFlight]

@@alistairknott6075 i plan to make videos that focus on the individual device types and there I will better highlight the connecting psrt

[@alistairknott6075]

@@MobiFlight fantastic thanks, have subscribed. Not started wiring of my PMDG 737-800 Sim and plan to use Mobiflight but the whole Arduino (or what would I use Leo Bodnar for instead) is a whole new learning journey

[@MobiFlight]

@@alistairknott6075 to connect a button or switch you only have to run one wire from any of the pins to your component and one wire back to ground.

[@noahaviation4717]

Intersting video! I myself have just bought the WinWing Airbus FCU and I would like to configure it to my FsLabs A320 and Aerosoft A330! I got a bit confused where you talked about "modules" what is a module in the mobiflight?

[@Skinny-me]

Thank You Sebastian! Your videos are so inspirational, positive and easy to follow! Appreciate that! :) I am new user, even though I tried it some time ago, but did not have any modules at that time. Now (Using MF Ver10!) I have an X-touch Mini, and I followed this video using that unit, and it worked perfect! Just wonder why my Saitek Switch panel does not show up in Mobiflight? Do I have to load the Logitech Software for that to work? Thank you so much, and have great days! :)

[@MobiFlight]

The Saitek switch panel might not show because it might not present itself like a Joystick. Unfortunately I don't have one. But I have the Multi Panel from Saitek - i don't use it tbh, but maybe at some point i can integrate it too

[@Skinny-me]

@@MobiFlight Dear Sebastian, I know very many flight-simmers Use the Saitek panels, and would be more inclined to use Mobiflight if there was support for those. I Just found out via forums that SPAD.NEXT can access the Saitek series of hardware without even loading any drivers for them. You probably already know that, and I understand its a lot of hard work behind such a solution. Anyways, appreciate all you have done for the FltSim community, and looking forward to start using MF as well! :) Thanks! Dave,

[@coriscotupi]

Cool presentation, powerful product. I tried the parking brake example, LED + switch, and it worked fine. So here's a question - does the MobiFlight PC application need to be running in the background, or is there a way to upload all the functionality to the Arduino board, so that the host computer running FS2020 wouldn't need an additional program when actually flying?

[@checksixivan4921]

Hello, great stuff! I am interested in building the panels for DCS application, but I only noticed MSFS 2020, Xplane, and P3D options. Does it require a specific simulator to be in the drop-down menus in order for me to use Mobiflight to configure boards for use in DCS, or is this not possible at the moment? Thanks

[@MobiFlight]

dcs is unfortunately not supported yet

[@christianbeyrend5209]

Hello, I have a problem, I am at 4:30 of the video. I have a Leonardo connected, and it show Pro Micro. I can not found the way for mobiflight to forget this device and switch to my new one!

[@Steveobobevo]

Do I need to download arduino ide first before using it for mobiflight?

[@MobiFlight]

no! you don't - simply connect the board and start mobiflight

[@pfv3462]

I am impatiently waiting for my ordered components to arrive! And then I can start building on my AP, hopefully I will find enough help to bring my project to a successful conclusion! ps: On my honeycomb throttle quadrant the AP buttons don't work in Xplane 12 Is there also a forum or a helpdesk?

[@TeceroliCockpits]

Fantastic! congratulations, now how a conect rotary encoder in multiplex16c? not way to do?

[@MobiFlight]

at the moment that is not possible

[@maxmotoring21]

Great! Could you make an X-Plane specific video?

[@MobiFlight]

you bet! in the meantime watch MobiFlight's new direct X-Plane integration kzbin.info/www/bejne/e6W9nmmPj7uDqKc

[@marcw.5492]

I tried SPAD - gave up (im no dummy) is this easier ? I got the OCTAVI and really want some flexibility in MSFS and XPLANE ! like A320 cockpit and G3000 ? not clear how the TCS (touch screens) will play with Octavi .... thank you ! nice work !

[@MobiFlight]

Thanks for your feedback! Have fun simming.

[@Rookblunder]

I got the Wingwin combo and it works great with the Fenix A321 right out of the box. But I tried to download Mobiflight and then the addon for the A400M, but I just couldn't grasp what to do and make it work. The panel showed the same numbers in the Sim at the start, but they wouldn't move when I turned them.

[@Petercrossed]

Other account its me: finally got it to work 😊

[@qinghuazhang9865]

Enjoy your video very much! I play MS2020 and got a C172 Compass from SimMax and don't know how to configure it, (I did some configurations, when click the test button in MF, the compass wheel is turning, but when run the MS2020, the wheel didn't move though the flight sim value and output value is running fast in MF. Can you share how to setup it and thanks a lot.

[@MobiFlight]

Best in such a specific case is to join our Discord and ask your question there mobiflight.com/discord

[@petersalkeld]

Thank you so much for the work you have put in to creating Mobiflight and such good videos. As a complete newcomer to Mobiflight I have a question. What if I can’t find a preset for an event? For example, I fly the Cessna Longitude and I want to create a physical switch for the Standby Power switch, but I cannot find a preset for this. Am I doing something wrong?

[@MobiFlight]

Always check in "Generic" as I explained in the video. If you don't find it there either then you have to look it up yourself using the behavior model dialog (developer mode) or join our discord and ask there

[@Алексей-п4т4ж]

Thanks! There is a question, will there ever be support for old Saitek devices, namely the BIP panel?

[@MobiFlight]

Good question. priority at this point is not so high since there was not so much demand for it so far. But i had a look at the USB protocol of the Saitek panels lately and I recently added support for the Honeycomb Bravo. That means Mobiflight is prepared now to support other HId devices too

[@antifashist7470]

Super, Thank you

[@MobiFlight]

Thank you!

[@antifashist7470]

@@MobiFlight No, my brother thank you. You did the wonderful job.

[@russhillis]

Anything for the Turtle Beach yoke?

[@MobiFlight]

Oh! it also has LEDs... great idea

[@tiberiud1955]

I just got started with flight simulator 2020. Very good video. Sebastian I am using Scott Vincent to display the gauges on a 2nd monitor. I am new to this. Is that what I should use ? what you recomend ?

[@MobiFlight]

You can use what you think helps making your flight sim experience better. At the moment Mobiflight doesn't offer software gauges yet. Last year I made a Proof of concept where I exposed the data from Mobiflight to a browser with software gauges. So in the future this will become a feature. At the moment the strength of Mobiflight is to build real physical hardware. You can build real gauges using stepper motors or servos. That's a lot of fun.

[@SamwiAms]

does mobiflight can work with MUX or multiplexer? do you have video for it?

[@AdrianAdkin-p8z]

I have Mobi running on my autopilot board in xplane 12. I have now also put microsoft 2024 on how do I connect this to the autopilot ?

[@stefanpotrepka5749]

Can you do tutorial about OLED display?

[@MobiFlight]

OLED displays are not yet supported, only the regular LcD screens are. But thanks for posting this, i want to make a video about custom devices

[@danytovar5715]

Thank you very much for the great contribution to the simulation, it is amazing. I have a problem with ARDUINO UNO. I assign the switches and they work very well but shortly after activating them, the ARDUINO UNO crashes, I reset it and it works again but it crashes again after using the switch. What could it be please?

[@MobiFlight]

sounds like it's shorting out and resetting

[@MobiFlight]

check your wiring again and make sure it's connected properly

[@danytovar5715]

Hello, thank you very much for responding. I solved it by changing to ARDUINO MEGA. But now when configuring heading I get 344 degrees in the HDG cockpit view, and in mobiflight Flight sim value 359.181976, and in Out put value 359.181976. I have tried some formulas in the transform option but I haven't found it@@MobiFlight

[@MobiFlight]

@danytovar5715 try Round($,0)

[@MobiFlight]

oh and what plane is that? there might be a special preset for it if it doesn't use the standard auto pilot HDG value

[@Spacewind66]

Hello dear MobiFlight team, I bought this mini cockpit from Octavi and have been trying to establish a connection to MSFS or the Fenix ​​A320 for a few days now. Unfortunately I haven't been assigned anything. Do you have a tip for me, or is there already a suitable script for this somewhere?

[@MobiFlight]

there are many presets available for fenix, you can filter and search to find the one that you're looking for

[@ralfp6196]

Thank you for your tutorials. I have a question: When I have done the complete configuration and start MS flightsimulator, do I have to run Arduino IDE, Mobiflight and Simconnect in the background or is the Arduino Controller then working self-sufficient? Thanks for your great work.

[@MobiFlight]

you only need to run MobiFlight - the Arduino IDE is not needed at all.

[@JmarkFP]

Hi dear, can you show the connection of leds and button on arduino board?

[@MobiFlight]

maybe this helps www.mobiflight.com/en/tutorials/led-parking-brake.html

[@MobiFlight]

www.mobiflight.com/en/tutorials/switch-parking-brake.html

[@JmarkFP]

Thanks mate @@MobiFlight

[@LucasAlves-qr6ji]

O know MF does not support OLED displays, but is there any way to send something like raw information from MF to a board (via serial or i2C) and then on this another board make the arrengements for the OLED display?

[@rolfbissinger]

hi sebastian im building my a320 fcu and efis using mobiflight (thanks for hard work and sharing) i can not figurit out how to conect an tm1637 display for QNH DISPLAY (is it not suported?) how can i display QNH?

[@MobiFlight]

this is possible in v10

[@ClevaTreva]

Will Mobiflight enable the MiniFCU to work with iniBuilds' A300?

[@MobiFlight]

yes! mobiflight users also get a 10% off mobiflight.com/minifcu

[@despacitoRC]

Do you need FSUIPC for mobo flight to work?

[@MobiFlight]

i am pointing it out in the video - u only need it for p3d and fsx

[@despacitoRC]

@@MobiFlight thanks a lot

[@atec212]

Good afternoon, first of all congratulations for your work. I need help. I have built an overhead and wired and programmed with mobiflight. I have used 4 Mega R3 cards, but I don't know how to make all 4 work at the same time, both leds and buttons. There is a way. Thank you so much.

[@MobiFlight]

you connect them at the same time and Mobiflight will see them and you can control everything through Mobiflight

[@jaybeckham]

I am new to MobiFlight. I have MSFS2020 and am planing on a double seat 737-NG based on drawings of Karl Clarke of 737DIYSIM fame. Other than your recent videos is there some reading I need to do and then try various things e.g. switches, LED, etc.? Also what additional software other than MobiFlight do I need to download? I will be using Arduino.

[@MobiFlight]

you should be fine with just using mobiflight

[@maxlewandowski841]

Having trouble with the Fenix A320 Lights

[@Glasairman]

Is it possible to link to Virpil and Elgato Streamdeck IO''s?

[@HenderikSteenberg]

Hi Can you use a multiplexer with mobiFlight?

[@MobiFlight]

Yes, that's possible. See github.com/MobiFlight/MobiFlight-Connector/wiki/Input-and-Output-devices#input-multiplexer

[@GDViperWorks]

Can this interface with DCS? Does it code as USB HID?

[@MobiFlight]

Mobiflight doesn't support DCS yet and it doesn't show as a USB HID either.

[@kirkbymr]

I'm new to this. Can you write VB or C code? Instead of arduino, does it work with Raspberry Pi? My point is instead of hardware switches, can I create app on Raspberry Pi.

[@MobiFlight]

you don't write any code when using mobiflight- arduino is the platform for the firmware. we have raspberry pico support. PI is a different platform and the firmware cannot be easily ported. At the moment it's not easily possible to integrate with Raspberry PI

[@heinzpilot]

Will this work with the flight Sim builder audio panel? I need a software that allows me to turn on the information lights

[@MobiFlight]

it's in the makes. Ping me on discord.

[@Jewish-Bandera]

Guter tag Sebastian. It is very good that you started new tutorials 2023. There not much video tutorials for Mobiflight. Yesterday I broke my head doing servo tutorial from MB website and result is zero. Please let me know when gonna be new servo video tutorial with explanation of all parameter like input/output values, need external power or not and all others settings. Thank you for your job.

[@MobiFlight]

the next video is about troubleshooting, and then I can do another topic

[@Jewish-Bandera]

@@MobiFlight Thanks a lot man

[@inagerli]

Hi, is a autothrottle output with all airliners of MsFs2020 possible or only the aircrafts listen in your tool? Thx !

[@harrysmith1986]

Can this software be used in conjunction with honeycomb yoke. Wanting a fix for the horrific trim behaviour in msfs, button press.

[@MobiFlight]

yes it can! the trim might be a bit weird too - BUT: I am working on an improvement

[@jeroendevries7825]

Thank you for the video. But I've a problem with the 737-800 FD led Captaind and First officer. The code give 100% off. So the led goes on when the FD is off. How can I change that?

[@MobiFlight]

i think you already joined our discord and you're getting support on this, right? If not, join mobiflight.com/discord

[@_plasticarmor_8789]

Good time of the day, be kind, tell me this program works with DCS World , I 'm making a push - button box and I want to put three seven - segment indicators to receive information from the push - button box ? P.s Thanks in advance!!!!!

[@MobiFlight]

Unfortunately DCS is not yet supported by MobiFlight

[@_plasticarmor_8789]

@@MobiFlight thank !!!!

[@MobiFlight]

@@_plasticarmor_8789 what you actually could do is use vJoy to send button presses with MobiFlight to DCS and you can use Mobiflight variables to display data. It can be out of sync with DCS when you start using virtual switches in the cockpit - but if you only use your buttons then it can work

[@henson2k]

How to use Stream Deck as input for MobiFlight?

[@MobiFlight]

at the moment that's not possible

[@marcoity961]

Hi Sebastian, thank you very much for your great videos. I would like to ask you a help with Fenix A320, I can't see on LCD the set height. The function FXNX320_ACTUAL_ALTITUDE_DISPLAY (A:INDICATED ALTITUDE,Feet) shows the height where the plane is. Thank you very much. Mark

[@MobiFlight]

you're saying the preset doesn't work?

[@marcoity961]

@@MobiFlight The preset works, but I have the problem that I would like to see the altitude set via the encoder, instead the preset shows the altitude at which the aircraft is and the value goes up or down as the aircraft goes up or down. If I am at 5000 feet and I set 10,000 feet with the encoder, the preset will show 5001,5002,5003.....

[@MobiFlight]

@@marcoity961 then you're using the wrong preset. you have to find one for the autopilot, not "actual"

[@marcoity961]

@@MobiFlight I solved it by using FSUIPC7 Offset variables. thank you for your time.

[@MobiFlight]

@@marcoity961 you should not require FSUIPC for Fenix at all.

[@Izmael1310]

Can I use this for mapping LNAV and VNAV toggle to a joystick (hotas) which I bought? MSFS does not know command for LNAV neither VNAV so I cant assign it even if I use non homemade device :) Thanks.

[@pulidoggy]

@MobiFlight Hi Sebastian, and thanks so much for the clear and useful tutorial. I was unsure on how to approach MobiFlight, but after watching your video I'm confident I can make it 🙏 Still a couple of small doubts: for MSFS (and PMDG 737-800 in my case) I get that the variable type to use is SimConnect, while instead FSUIPC offsets are meant for P3D and DataRef are for X-Plane. But then what about the remaining type, MobiFlight variable? And also, in my configuration as above, does FSUIPC need to be installed or not? Thank you and kudos for your excellent work! Roberto

[@MobiFlight]

mobiflight variables are sometimes helpful when you locally want to store a variable, e.g. for a multi function based on a switch position.

[@MobiFlight]

In most cases, you don't need FSuiPC for MSFS2020. MobiFlight is not using the native PMDG SDK at the moment. FSUIPC may allow you access to some datapoints fortnehme PMDG. you don't have to use a registered version though.

[@patwhite2740]

hello can mobiflight be used with Xplane 12 and Streamdeck XL? thx

[@MobiFlight]

stream decks are not directly supported by mobiflight but there is a tool that builds on top of MF... github.com/nguyenquyhy/Flight-Tracker-StreamDeck/blob/main/docs/USERGUIDE.md not sure if it is still developed and maintained

[@NOOBGAMER-or5ze]

Make a video on how to configure the Throttle, Speed ​​Brakes, Flaps and Reversos on the Xplane 12

[@redstone51]

Is the Arduino 33 BLE Sense supported? Its not being recognized.🙄🙏

[@MobiFlight]

No it is not. Why would you want to use a board that is specialized on built-in sensors for the home cockpit application?

[@tiagovila2702]

Hello what is the pin settings please?

[@MobiFlight]

You can select the pins you want. Just open the settings dialog and go to the boards section where you can manage your devices

[@lucianogomesdev]

I connected the LED to the MEGA 2560 arduino. What configuration should I send to the Arduino so that it works normally?

[@MobiFlight]

like explained in the video. create an output config (output/led) and configure it, eg for the parking brake

[@FreeDom-cv8dw]

Thank you for the software but it says "No modules were found" can you help me?

[@MobiFlight]

please join our Discord for such support

[@carlosrengifo5154]

hello good. I'm doing a QT of the 737. Complete. I would like to know if with Mobiflight I can get the presets for the A/T Throttle Lever and make the movement with some motors. I have searched and asked on Discord and they tell me that there are no presets for that.

[@MobiFlight]

What's an A/T Throttle Lever? You mean when the Throttles are managed by A/T mode? It is a closed system and not simple but people have built it.

[@mathieusan]

What do you recommend if I want to use a hardware not listed there, to receive data from FSX and draw a fully custom graphic, say my own attitude indicator? Do you have example of Arduino IDE code I can get started and write code on an arduino to receive data from FSX and have my hardware react to it? (say simple Serial.println() for now, to write whatever data is received from FSX, if I have that as a template I can code the rest). Thanks

[@MobiFlight]

you have to check the new custom device and boards feature - this will make it very easy now.

[@무대뽀왕-l9e]

Is the PC version of Aerofly FS4 also compatible?

[@MobiFlight]

nope

[@Timshaodreamer]

Hello, I'd like to ask why the values are reset to 0 even I set it to 1 or 3 then saved it.

[@MobiFlight]

i am not sure what you mean - probably mobiflight variables - they are always initialized to 0 when you stop & run mobiflight

[@Arduinotips]

how install simconnect?

[@martinbryk4035]

Hello, I'm just getting started on this, if you don't mind I would like to ask you. I have an Arduino Uno with an atmega328p u-th 354730, is it compatible? Is the purpose of the program to act as firmware? I want to make a flight joystick, is it compatible with hall sensors or should I just use potentiometers? Is it compatible with other games like war thunder or DCS? Thank you so much

[@MobiFlight]

Arduino Uno is supported. Mobiflight uploads a firmware and makes the arduino configurable. You define what devices are connected to it and you can configure everything through Mobiflight. Watch the video and everything will make more sense.

[@MobiFlight]

DCS is currently not supported

[@ramjeansakeel8242]

Hello sir i am not able to have the AP 2 led to light up but on pressing the button it activating and the exped button not working at all button and led not working at all plz help

[@MobiFlight]

Hey! No worries. What plane are you using? For specific questions please join our Discord and ask there mobiflight.com/discord

[@ramjeansakeel8242]

@@MobiFlight hello am using flybywire a32nx

[@ghjffddgghy6072]

Hi there, i just started using mobiflight but my arduino uno is not conecting to mobi flight, how can i fix this issue ?

[@MobiFlight]

you might have to install ch340 drivers

[@ghjffddgghy6072]

@@MobiFlight Hi, my problem is already solved my cable was damaged so i bought a new one and now it is working just fine.

[@wellingtonsantos7826]

HI I HAVE PROBLEMS WITH MOBIFLIGHT, I RECENTLY DOWNLOADED IT AND INSTALLED IT. I TRY TO OPEN A CERTAIN CONFIG I SAVED, BUT IT SAYS IT CAN NOT BE LOADED BECAUSE OF SYNTAX ERRORS, PLEASE HELP ME.

[@MobiFlight]

For specific questions please join our Discord and ask there mobiflight.com/discord

[@hubertnovak5919]

hi guys, i have followed this and i tried adding an encoder. It uploads to the board but then when i try to exit from the screen i get a message that the selected module does not contain any output device. I have restarted xplane, the board, Mobiflight ...I am using a Arduino Mega and pretty sure the encoder is wired up correctly. Not sure what i am doing wrong?

[@hubertnovak5919]

hi all please disregard

[@MobiFlight]

i guess you figured it out: encoders are input devices

[@zaelu]

Hello! Could someone pass the message to Mobiflight team that currently we can't create a new account on the site? Thank you!

[@MobiFlight]

it should be possible. Please check your spam folder when using gmail, hotmail, etc

[@zaelu]

@@MobiFlight Hello. The form doesn't work. I tried Chrome and Edge. I fill in, click the button nothing happens.