Thanks for sharing, is there any guides/info you were able to follow? Cant find much info online for removing the harness from a m111
@Beechams1042Күн бұрын
Nothing too clear I’m afraid. It’s just a case of taking it slow and taking off the bits to make it clear. So the airbox and pipes linked to it. And the bulkhead soundproofing with the plastic flower-looking clips opens that out. Then it’s just slowly unclip as you go.
@ChrisCaffell2 күн бұрын
Hi, great spot ❤ Where's it located please. Looks to have been off the road about 27 yrs😢. X
@Beechams10422 күн бұрын
It’s down in the yard of a local garage. So there is hope for it. I think it looks worse than it is. Plus they’ve done a lot of work on other tvrs and lotuses. :)
@MJSherwood2 күн бұрын
It was an add concept that gave the driver convenience of a full size door on a sporty coupé but also access to back seats for passengers
@Beechams10422 күн бұрын
And unlike the mini clubman the door was curbside for us in the UK.
@billygd1004 күн бұрын
I have a black 300ce
@leslieleonard6997 күн бұрын
I got my eng Harness fited last weekend, my car is running good now thank god, just as well I didn't try fit it my self I would have fucked up 😆
@Beechams10427 күн бұрын
Glad it’s running well. Mines still not right. So think I’ll have to fit new coils. Shouldn’t be too hard as I had to remove and refit them for the coil harness. Just annoying I had to buy new and refit. Should I’ve done it all at the same time really.
@leslieleonard6996 күн бұрын
No harm in doing them might do mine as well
@leslieleonard699Күн бұрын
Let us know how U get on, my car is still a bit lump E on starting up, but it is still alot better since I got the eng Harness done PS next is a real big service, gear box oil, eng oil and so on , will let U know how I get on mate
@Beechams1042Күн бұрын
parts have arrived today from AutoDoc. So I know what I’m doing tomorrow! I’ve not done anything on my gearbox, so guess it may be good practice to do a gearbox oil service? How do you do that? A part 7 will be coming soon….! Also doing the hoses and discs and pads tomorrow too.
@leslieleonard699Күн бұрын
I wouldn't know about doing a gear box oil change 1:38
@leslieleonard6998 күн бұрын
Good job mate
@jimmycarter909914 күн бұрын
I never have a problem 😊I have other vehicles but I like this one the best
@jimmycarter909914 күн бұрын
Thanks I got one of these cars it’s been a nightmare but for some reason I still keep it half the time it won’t start for my wife I think she’s jealous 😊
@Beechams104213 күн бұрын
Mines needed a lot of love (and money) recently but I wouldn’t change it.
@JosedejesusHernandezdias-zy4dv17 күн бұрын
Colombia
@JosedejesusHernandezdias-zy4dv17 күн бұрын
Avíseme por favor gracias
@JosedejesusHernandezdias-zy4dv17 күн бұрын
Estoy interesado en uno carrera 6N.2.49 barrio San Sebastian la Plata Huila precio
@Beechams104216 күн бұрын
I’m not sure where to get them online. This one came from a B&M store in the uk. But I’d say get a more expensive better quality one as this fell apart a few months later having only been used 6 times.
@andrewpowell685117 күн бұрын
Sunny
@AL-np5br18 күн бұрын
Would satisfy you for about 6 months then you’d want something more. Don’t get trapped in materialism
@tttt402918 күн бұрын
Older DB9's arent that expensive actually.
@the45boxs7918 күн бұрын
BCSD syndrome ...drive a yaris instead 👍
@thebritishgamerandstuff832820 күн бұрын
You’re gonna gloss over that Ford focus st 😂
@leslieleonard69922 күн бұрын
I have done the coils and throttle body on my one, just need to do the harness 😢
@Beechams104222 күн бұрын
That’s my job for tomorrow. I think I know how to do it! But obvs a video coming soon.
@leslieleonard69922 күн бұрын
If u can do the harness, u can do coils harness, the harded part is getting the coils out and putting them back in, not much room to do it, theirs 4 nuts U need to take off on top of the in let, when u have them off they should drop out
@leslieleonard69917 күн бұрын
How did u get on with the coil harness?
@Beechams104217 күн бұрын
@@leslieleonard699 I've got it fitted and it appears to have made the difference - along with the refurbished wiring in the throttle body. most of the lumpiness has gone and it's no longer stalling. So that's good. It wasn't too hard to swap over either. The video is coming out in a couple of weeks. How are you getting on?
@Beechams104217 күн бұрын
@@leslieleonard699 Not to bad - and it all appears to have worked. Video coming in a couple of weeks, How are you getting on?
@leslieleonard69922 күн бұрын
Part 6 IAM watching
@Beechams104218 күн бұрын
Part 6 coming in a couple of weeks.
@leslieleonard69922 күн бұрын
Part 6 IAM watching
@keiadam26 күн бұрын
Damn, a C6 Grand Sport
@austineleo583929 күн бұрын
Yeah me too, i want one also 🤑
@leslieleonard699Ай бұрын
How did u do the loom that goes behind the bulkhead? That goes to your Maf??? Been trying to work that out?????
@Beechams1042Ай бұрын
There are some plastic flower shaped screws in the bulkhead soundproofing. Thanks these out and the rubber stripping along the top off. Then the soundproofing should come away from the bulkhead giving you space to feed that wire along, and also to get the loom through from the battery into the engine bay. You don’t need to cut anything!
@leslieleonard699Ай бұрын
Thank U I was looking at them screws, thinking it may be the way to do it PS I need to have a good look at my Harness make sure I have the Right one
@Beechams1042Ай бұрын
@@leslieleonard699 I tried to lay out the new one and the old one to check them side by side. Then realised k was missing a connector! So had to return the new one and send my old one off to be refurbished.
@leslieleonard699Ай бұрын
I see I hope I don't have the same problem 😃 I got my Harness and coil Harness from a company in Germany called Kurth classic Auto parts, the coil Harness was grand and fitted, so I hope the Eng harness does the same, still not sure if I will have a go at it my self, might get a Mercedes guy to do it for around 300 euro, PS I got my Throttle body rebuild off a guy in Belgium called Kay DL he's on face book, have been getting parts off him for some years, his parts are 💯
@leslieleonard69922 күн бұрын
Hi u doing did u put part 6 up yet??? Would it be possible to talk to on the phone??? About doing my harnes?
@leslieleonard699Ай бұрын
I hope my loom fits 😆
@leslieleonard699Ай бұрын
Great videos u might need to do the Throttle body as well, and the coil hardness, i have 95 E220 my self , I have done the throttle body and coil harness, i have the eng harness there but have done yet, hoping to learn something from your videos 😆
@Beechams1042Ай бұрын
I’ve got the coil harness on order and sileck.co.uk are doing my throttle body wiring too. They did the harness. So part 6 will be coming along before too long!
@leslieleonard699Ай бұрын
Look forward to seen part 6
@leslieleonard699Ай бұрын
Hi I got a bit worried when U said your Harness at first diding fit and U had to send back? So I just checked checked my new one like U said put across the eng Bay? Still not sure where every thing goes? So I checked the part number of the harness that's on the car, and it matches the same part number on my new one? So I should be ok then ye ye ye????
@Beechams1042Ай бұрын
@@leslieleonard699 If you've checked the part number you should be fine! I didn't until it was too late. But I was luckily able to get my old one refurbished. And i found working from back to front made most sense in fitting the wires and connectors in.
@leslieleonard699Ай бұрын
So when fiting wires, did U start from the ECU ba
@Trister4305Ай бұрын
Red
@victorsvoice7978Ай бұрын
The Sukura is the electric version of this car. Too bad Nissan doesn't sell this car outside Japan as an electric only vehicle.
@Beechams1042Ай бұрын
I think kei cars sold in other countries would do well.
@bernardmiller7247Ай бұрын
I’d love one. They’re cheap to import individually but almost impossible to insure in the UK.
@Beechams1042Ай бұрын
I’ve ended up looking on car import websites almost daily for a kei car now. Or a kei truck. I’d love something. And they make so much sense - small and cheap to run. Hadn’t thought about the insurance though…
@zecarlospiripiriАй бұрын
Reference speaker?
@mangobot232Ай бұрын
I love it
@chrisedwards4917Ай бұрын
Lovely 😊
@benwaterson8867Ай бұрын
60 series land cruiser
@XXX-ir3lrАй бұрын
YES, THIS IS THE POLE
@turbotoshyАй бұрын
Love those things! Big scene for them tuning wise over there too. Roomy and zoomy!
@TheRunDanceKid2 ай бұрын
Cheers for the vid dude. My rear shocks were leaking oil. New shocks are around £130 but managed to find a mx5 breakers near by and got 2 complete struts for £10 each. The springs on mine were better, so I swapped them over. I managed to get the struts off and back on with a little difficulty but didn’t need to take any bars off. A bit of wiggling between the bars and they do come off and go back on without stripping anything else off if your nuts are as rusty as mine were. Car handles like a go cart again 😂 with no knocking noises. Time to save up for a complete set of new struts.
@Beechams10422 ай бұрын
You’re a better mechanic than me if you were able to get it out without moving other bits!
@TheRunDanceKid2 ай бұрын
Rough and ready more like 😂. The car is 20yrs old, all fittings are so rusty and most nuts I’ve undone in the past just round off due to the condition of them. It would be like opening a can of worms undoing more things on mine and creating more work. It was tricky but perseverance is the key.
@nrtvegas45152 ай бұрын
I have one wiper also have you noticed the M the wipers make when the screen is wet
@Beechams10422 ай бұрын
I have. It’s the jiggle in the middle! Do wish there was an easy way to make it park up in the centre of the screen - full DTM spec.
@ivanrisimovic77432 ай бұрын
Unleaded..benz
@ODEL__2 ай бұрын
Modern Mercedes’ still have that aswell!
@aarondwyer37462 ай бұрын
Series two or one,4 door or 2 door
@Beechams10422 ай бұрын
Think it’s a 4 door disco 1
@Andreas-yz5cf2 ай бұрын
Mein S212 hat da so ein Gummiband, das nun gerissen ist. Welch ein Fortschritt!😅
@jacobbennett85942 ай бұрын
Ich bin american, mein froind! (I hope to God I did that right)
@ickeendverbraucher59902 ай бұрын
Und es kommt noch schlimmer....ohne dein Gummiband bekommst Du keine HU, kein Witz 😂
@Andreas-yz5cf2 ай бұрын
@@ickeendverbraucher5990 Wirklich? Ich meine zuzutrauen wäre denen das.
@ickeendverbraucher59902 ай бұрын
@@Andreas-yz5cf Ja, wirklich.... Begründung ist Umweltschutz, wegen offen lassen. Total gestört 😞
@mattosoffice4772 ай бұрын
Ford 😏 no cap
@Frenki-gy9zd2 ай бұрын
Woopie fkin do who cares
@mattjagger43602 ай бұрын
Oh yes. Now that's proper engineering that is. Lovely job 👏 umbrella in a door, pah, have a day off, give me a fuel cap holder any day.
@martinpierce45082 ай бұрын
Hunk'a junk....
@user-bb1pd7tz4z2 ай бұрын
Fatboy
@anthonydevany77062 ай бұрын
“A proper Harley” what as opposed to what a Kawasaki a Honda a Yamaha of course it’s a Harley you melt
@Beechams10422 ай бұрын
I’m not a bike guy - but I’m sure you can get bikes that look similar to a Harley but from other brands.
@ReubenSound2 ай бұрын
Gilbern Invader Mk3 from 1972-4. Ford Essex 3.0L V6 and Cortina suspension and rear axle. There's a few videos of its restoration on KZbin. It's perfect :D
@Beechams10422 ай бұрын
It’s a lovely looking thing. Thought it was an old Alfa from behind.
@andygrayson74852 ай бұрын
Good video, im going to have a go at this job, seems pretty straightforward, my springs are ok but the shocks are leaking oil, can I re-use the springs I wonder ?? many thanks 👍
@Beechams10422 ай бұрын
If the springs are in good condition I don’t see why not. Good luck!
@zacharycarrasco51092 ай бұрын
What’s the clover mean?
@Beechams10422 ай бұрын
It’s the quadrifoglio badge - clover leaf - it’s to Alfa what M or AMG is to BMW or Mercedes.