Awesome

Ya but I wanted to do something different

@@jronpaul true

na it's easier if u have gears

this one www.amazon.com/gp/product/B06XPQNBGB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 but i dont like it... id consider trying this one,. it should fit, its 1 1/8 but i cant guarantee it.. you see in my video that i had to grind the threads away on the old upper bearing cap to fit the forks. www.amazon.com/BOLANY-Mountain-Suspension-Absorber-Adjustment/dp/B09CSK3NQR/ref=sr_1_7?crid=2LZ510DGW69XZ&dib=eyJ2IjoiMSJ9.zrZicz99J9FKbchvd968-6_5ybsqLbi5taRC016n8DCXtuJDd7XJUgRjFNfrpL9YtT_5nSX_yjk0DnP-yOYl-PhxtoLvUcYz4YZTFmS8MW91iFACnI2_0syX01Wi-2umnogYm417lBzW7iqwmSf7MfsFwWSOd-GLmNvf5uu1ElYSP1GPDnklBXUqOQ9g-3b3CxhHxNfTy-qKzIAMj13OOIL8cK-5srmXhECYXn69yMftgmgQ0bURS79N_I5pI4NtcD9YiL7UOWNLwNjf-veS2VIO-eLSE1ORdRhBIB8CR78.30Bie4UDm-sEAuT8PYnzUMEf_ahwT2yFSxp210zxH2Q&dib_tag=se&keywords=front%2Bfork%2B1%2B1%2F8&qid=1715024092&sprefix=front%2Bfork%2B1%2B1%2F%2Caps%2C88&sr=8-7&th=1

it was the starter chain.. its actually behind that cover... i think the chain guide fell out and jammed the chain.. i put the guide back in with RTV sealant to hold it in place and replaced the chain.

Glad I could help

Glad you liked it!

aweseome!! glad to help

HAHAHAHAH sure thing

Thanks a lot dude.. appreciate it 👍

Very far. Lol... sorry.. I'm in Assachusetts..

@@audacityhour3104 ohh ya.. the blacked out one ?

agreed... i dont ride it around.. i built it to sell.. so yes, i believe the police would bust you on it. i have been using it recently at the track as a pit bike to get around. i beleive it can be registered if I put lights on it... i may do that soon.

@jronpaul all the work that you put into it, you deserve more than you are asking. A title will help get at least 3500 for it. I bought mine to stay under the radar and save money on fuel and insurance, so I'll want to build mine in a way where I can at least argue it doesn't go over 35mph.

@Jacobe2of4 thanks,dude.. Ya , I've had a lot of people give positive feedback and a few negative... Good idea though.. I should look into a title for it.

when you build a bike with a engine that is Not legal. You go the the dmv for home made vehicles and you get ID numbers to stamp into the frame. Then you still need a license to drive it because it get's a plate. Simple easy pz. I had a 250 motor on a mountain bike 2 yr's back. I had to do all this through the DMV. And that's ANY state. X popo.

thanks for the compliment

Thanks .. appreciate it

1500

Welded a bracket on the frame for the Caliper. Then there is an adapter that screws on the hub where the drive sprocket used to be

@@jronpaul where did you find that adapter

4:00 you did a great job brother... Thanks for the video & some 🤔 Idea's!! Chopper 🚴 On

www.amazon.com/gp/product/B08RWK1B2Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

kzbin.info?event=comments&redir_token=QUFFLUhqbHhvVkJSaFBoNjh6bW1tNEhGMnpVWU9pekZIZ3xBQ3Jtc0tsT3NNQWo5WjRIbjBOTmR4LVNhY0hOQk5HTl9KQVR3Zk5yUHlCVGQxNG1Yb2dybW9ZTVpBanBPeExWbDk5Qjk0Qm1UZHRyU0hrUjBzcjlpUU1ybEQ2NmxtNmlpdDhual9Hc0VGUHh4cHJvYlBuV1BZaw&q=https%3A%2F%2Fwww.amazon.com%2Fgp%2Fproduct%2FB08RWK1B2Q%2Fref%3Dppx_yo_dt_b_search_asin_title%3Fie%3DUTF8%26psc%3D1&stzid=UgxV6klslzr7VSLBV8x4AaABAg.9r4xEsv2GDhA36OMfZ7jHB

Thanks.. I appreciate it

www.amazon.com/gp/aw/d/B06XPQNBGB?psc=1&ref=ppx_pop_mob_b_asin_title

See if it's coming from the seals behind the screws

@@ronnierepairman2964 yes i just order the new seals and im gonna replace it thx for video

cause i beleive was, the upper chain guide fell out. so the starter chain broke.. I put the chain guide back in and used RTV Engine Sealant to glue it in place and replaced the chain. if you take the cover off and you see the chain moving but nothing is happening, then you have a bad starter clutch. That is what the chain is connected to.

The chain broke. Looked like the guide fell off .. it's behind the cover in the video.. I had to get a new starter chain

you mean the shaft that has the gear for the timing chain? if so there is no seal there because it sits on the inside of the motor, behind the plate i took off that does have the seals.. there is a shaft seal in the plate that i took off though.

@@jronpaul no, the sprocket for the chain that's on the motor. The smaller one. When I puller the smaller sprocket off there was no o-ring or seal the bearings were exposed. but there is supposed to be one. I have 2 of these bikes so I pulled the smaller sprocket off the working bike and there is a thick seal in it. So I can also bet that's my leak. Because when I had the bike on it was spraying oil out of it. My dumb butt thought it was a seal on the inside so I pulled the motor and tore it apart 🤣🤣🤣 but all well I'll just put new seals on everything while it's open.

@AZNATIONRIDERS holy shit.. !!!

thanks it was the starter chain,.. it broke

bro

Hi Jacob.. I had it for a few months because I fix and sell them.. I thought it was awesome..

You can't read?

I'm not sure actually.. I'll send you the model and serial numbers when I get a chance

@@ronnierepairman2964 might be the same as this one kzbin.info/www/bejne/h5TSeop-eLiSaq8 I'm just wondering because I don't see it on the craftsman website so they probably stopped making it. I wonder when they discontinued it. they used to have a 20 inch, stopped making it and then 22 inch was the smallest. now the smallest is 24 inch. that will probably get discontinued soon. snowblowers just keep getting bigger. that's a shame because I liked the 22 inch size snowblower.

@@mrbubetube yes.. It is that one.. They discontinue models all the time though.. I didn't realize it was this blower, I actually sold it so I can't get the numbers

@@ronnierepairman2964 ya, that's their "sustainable business model" concept. keep discontinuing models so customers can't get parts to fix them, forcing them to throw away the old model and keep buying new models.

Im actually not sure.. The 1st motor i tried was an 80cc.. Fit without cutting.. But didn't have enough power.. The 2nd motor I did was a 5hp Honda and I had to cut the frame and same with the 3rd one I built with a 6.5hp.. There are kits thought that would allow you to bolt on a 2stroke motor.. Specially for the chopper

Hi.. I'm 5'9. I'd post more but I have to sell what I have before I can build another one 👍 Starting a new build,.. 110CC motor and going to add full suspension..

@@ronnierepairman2964 your selling this bike ?

@@kcscustombikes yes i am.. and another one i built with a brand new 6.5HP. That one is fast here is the video for it kzbin.info/www/bejne/inW9noCqaqqsiM0 Here is my link to the one in this video facebook.com/marketplace/item/479631079698969?ref=search&referral_code=marketplace_search

@@ronnierepairman2964 thanks

@@kcscustombikes facebook.com/marketplace/item/479631079698969?ref=search&referral_code=marketplace_search

thanks !

Thanks!

It has an 80cc champion motor