Is there a oring or seal on the counter shaft or are your ball bearing exposed on it. I'm having the similar problem but mine is coming from the counter shaft. I have my motor apart cause I'm doing all the seals but I didn't see one on my bike and the kit didn't come with one. Mine is a Apollo 125
@jronpaul Жыл бұрын
you mean the shaft that has the gear for the timing chain? if so there is no seal there because it sits on the inside of the motor, behind the plate i took off that does have the seals.. there is a shaft seal in the plate that i took off though.
@AZNATIONRIDERS Жыл бұрын
@@jronpaul no, the sprocket for the chain that's on the motor. The smaller one. When I puller the smaller sprocket off there was no o-ring or seal the bearings were exposed. but there is supposed to be one. I have 2 of these bikes so I pulled the smaller sprocket off the working bike and there is a thick seal in it. So I can also bet that's my leak. Because when I had the bike on it was spraying oil out of it. My dumb butt thought it was a seal on the inside so I pulled the motor and tore it apart 🤣🤣🤣 but all well I'll just put new seals on everything while it's open.
@ronnierepairman2964 Жыл бұрын
@AZNATIONRIDERS holy shit.. !!!
@diegomadrigal6562 жыл бұрын
thank you so much
@secretvenda8574 Жыл бұрын
i have same problem
@ronnierepairman2964 Жыл бұрын
See if it's coming from the seals behind the screws
@secretvenda8574 Жыл бұрын
@@ronnierepairman2964 yes i just order the new seals and im gonna replace it thx for video