Well shoot good buddy this video helped me all the way in 2024 thank you sir!
@kevinkurka802024 күн бұрын
Just what I thought as a fix but wanted to make sure
@charliekilo8944Ай бұрын
How hard is it to find a Gen 1? I'd love to get my hands on one.
@TheIronMooseАй бұрын
Excellent solution my good man, thanks a ton from 2024
@anthonyrodriguez20652 ай бұрын
Is there any way to lower the flame?
@sebastianniqvist31442 ай бұрын
I think satin looks the best but then again it would be better to see them all in real life.
@mcapaldi32 ай бұрын
This was extremely helpful, good comparison. Iv been looking at the black ice on line but I was suspicious that the pictures were deceiving, this video confirmed my worries. Thank you
@johnfranklin6852 ай бұрын
I presently own Walther PPS-M2 featuring a button style mag release. This is the second generation PPS. The first gen. featured a paddle style. In my opinion, this aspect of the first gen. happens to be far superior juxtaposed to the second. Not only did the change result in the loss of a unique characteristic, separating it from the run of the mill compact hand guns, it also is functionally inferior to it's predecessor, due to the fact, the button is painfully proud of the body of the gun. It therefore is easily prone to depress whenever your thumb may brush over it, or if you have a snug fitting holster. On frequent occasions, I've experienced failure of feed. This gun in dire need of a retrofit, either by recessing the button or reiterating the paddle. I personally would prefer the latter.
@jimraynor43832 ай бұрын
just got my first zippo, played with it throughout the day and noticed it was loose, this tape method really worked, thanks man
@njzeigler43703 ай бұрын
How did/are these sights holding up over the years?
@todyboy97444 ай бұрын
I got one without any logo which I think is a little rare
@Plato6285 ай бұрын
THANK YOUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU idk if ur gonna see tihs comment 10 years latter but this helped me restore 2 of my dads favorite lighters and when i surprise him with them i bet he will be really happy! thank you so much!
@TrueAmericanNative5 ай бұрын
So dangerous.
@kevmrales5 ай бұрын
what if you dont have a drill
@thatwhitecat6 ай бұрын
would this work on a a Cartier lighter ??
@LIONTAMER3D6 ай бұрын
A 6.3" barrel does wonders for the 10mm round
@christophercohen87126 ай бұрын
U boring the heck out of me !!!what the fuck are you going on about????
@justinbushman2776 ай бұрын
Also they are not $139 anymore 😂
@justinbushman2776 ай бұрын
I have the same one mine has only had 5 rounds put through it so far lol
@vikramsingh-vk8mc6 ай бұрын
I want sell my omega watch in cheap price
@miklemikemuster7 ай бұрын
XIV is 14
@Speedogg1387 ай бұрын
And it's the date code for 1998.
@txs2867 ай бұрын
Genius
@user-gs1ji7dj3n7 ай бұрын
Nice grips, where did they come from. I have just bought one and I am looking for new grips for it.
@tonycostello737 ай бұрын
thanks very helpful
@boonker2k8 ай бұрын
once again humbly requesting an update 🙏
@andrewjohnson69078 ай бұрын
Wow stfu and open the box
@randy25rhoads8 ай бұрын
Exactly what I want in a book review about Zippos! Thanks! 👍
@andrewjohnson69078 ай бұрын
SKEETDOG!
@timpaquette15769 ай бұрын
Just got mine in. Turning it off and on is different.
@JoseyWhales-ii4dk9 ай бұрын
I could see how sharp your rifling looked when it was pointing toward the camera...you definitely got a sweet deal its a beautiful rifle thank you for sharing brother 🇺🇸
@arpandey704310 ай бұрын
It is made in china
@kevinthorn967210 ай бұрын
I just got one off gunbroker 9mm gen 1 slide is silver tho? Was made in 1998. Ppl saying its rare
@doe9de99510 ай бұрын
I just sent one in for repair. It's a long story, but I accidentally superglued the insert inside the case, hoping they can fix it.
@kevinthorn967210 ай бұрын
You can change the 40 to a 9? P99
@Speedogg13810 ай бұрын
As in swap slides or drop in a 9mm barrel? The slides don't swap, and there are no conversion barrels I know of.
@kevinthorn967210 ай бұрын
@@Speedogg138 ahh i was seeing some stuff online about a conversion kit idk where i can find the gen 1 p99 9mm at ?
@KING-ot3th11 ай бұрын
It's a cheap made in China bore sighter man lol
@rickypitman103511 ай бұрын
I'll buy you a ss 19 in trade for the 28 ok bro. Man.
@robbiek199911 ай бұрын
Thank you for posting. I was able to restore my late father's Zippo lighter. That meant a lot...
@whittgym721511 ай бұрын
Thank you so much this helped me fix an old lighter my grandpa gave to me
@Bluestreak067 Жыл бұрын
Electrical tape works like a charm
@chuckbrooks3674 Жыл бұрын
It's because they're all democrats, you know, democrats don't put any thought into anything. Like go all electric. Haven't seen them rolling out any electric Airforce One jets have you?
@francogalli4495 Жыл бұрын
How Much Is the Price
@CobraCommanderlives Жыл бұрын
Walmart won't even sell 9mm anymore. Walmart also arrests innocent people for trespassing for deterring thieves. Let that one sink in.
@connor840 Жыл бұрын
Thankyou this helped loads.
@chrisblake1918 Жыл бұрын
AHEM!!!! A combat cartridge should start with .4, My P99 is .40, and I might get one of these last generation ones...
@liquidvic Жыл бұрын
I've owned and worn this watch since 2004. I bought it over the Rolex Submariner date. It looked better and the bracelet and the Sub's claps was cheap pressed steel in comparison. I've never thought it was a bad decision. I do own Rolex watches now but this Omega seamster 2551.80 midsize professional chronometer is still without a doubt my favourite and the most important watch in my collection.
@michaelgoff9948 Жыл бұрын
You saved my lighter.👍
@johnengland8619 Жыл бұрын
Thank you for the content. I am just learning about dates and stamps
@Ryansrangereport Жыл бұрын
It's a fiber optic sight, just slide one in and get a lighter... What a waste of time and money to send it back for that.
@franklinfx Жыл бұрын
why the heck would anyone try to shoot clays with a pistol grip shotgun...hello!!!
@joshb5108 Жыл бұрын
Thank you for this video!!! I recently bought a 1960's Zippo Moderne Bright Rhodium Table Lighter in near mint condition and unfired. The seller said his grandmother removed the flint so the kids wouldn't play with it and it just needed a flint to work. Reality was it had a corroded stuck flint and didn't accept a new flint. Being in such mint condition, I was afraid to run the drill bit through it, so i made sure to adjust the bit to barely fit the tube without extending too far to hit the wheel when it came out. Took my time and tested my patience...worked like a charm!! Thank you so much!!