I like my jones flow pros with flow master 2.5 stainless tails , Mac 15/8 long tubes , bbk h pipe
@seeunow44Ай бұрын
I am doing custom exhaust on coyote….doing myself but know nothing about exhaust….can you give me some advice based on your experience. I’m using ARH long tube headers 2 3/4
@natet1227Ай бұрын
I like how Corsa Extremes sound on Coyotes. Any straight through style sounds too obnoxious in my opinion. Every Coyote car in NW FL has straight pipes and sounds like 💩
@seeunow44Ай бұрын
So in your opinion I need a cross over or H pipe? Correct?
@santasstang8798Ай бұрын
I think the Flow Monsters sound better. I’d like to hear the V-250’s. Love the car buddy
@natet1227Ай бұрын
@@santasstang8798 The Flow Monsters definitely sound good, the v-250’s are Black Widows correct?
@Slim1423Ай бұрын
Flow Monsters are made by Flowmaster, its their cheaper line of mufflers.
@davidross7791Ай бұрын
Subscribed. Have to follow/support another foureye T-top car.
@MansfieldRacing229Ай бұрын
The flow monsters actually sounded better more crispy
@natet1227Ай бұрын
They definitely have a good sound.
@cassellracingАй бұрын
I like them💪!! SLP Loudmouth are interesting as well.
@Misterfister25Ай бұрын
Would be sick too win those !!!
@89gt5.0Ай бұрын
Black widow venom 250’s
@Fast-lu6quАй бұрын
Have you thought about trying Hooker muffers that's what l have on mine 93 cobra cone 302 svo heads xcam l love them
@natet1227Ай бұрын
I honestly have not. What does Hooker call them?
@Fast-lu6quАй бұрын
Aero chamber muffers
@TheModAddictАй бұрын
I think the pypes m80 (pypebomb) would be amazing on this car.
@MclaneMotorsАй бұрын
Have you thought about doing some slp loudmouths?
@natet1227Ай бұрын
Yea I kinda figure they would be about the same as any straight through type. I have done race bullets and thought it was too noisy.
@MclaneMotorsАй бұрын
@@natet1227 fair enough haha, I'm trying to figure out what to toss on mine myself
@gt1man931Ай бұрын
N/A or power adder? It looks gorgeous, nice parts.
@natet1227Ай бұрын
I had the machine shop gap the rings for a 150 shot that I plan on doing once I get a few hundred miles on it.
@rexmasters1541Ай бұрын
What a LOSER!!!
@charlieharris59Ай бұрын
Jones full boar
@nothanks81Ай бұрын
Not much different then the flomonsters he took off, both generic China mjfflers, he took off the 1 chambers, the full boar are 2 chambers just flow master knock offs everyone's selling and branding now.
@georgiaboy1579Ай бұрын
The spintechs sound rowdy 😁 Both sound good though. Any difference in the butt dyno?
@natet1227Ай бұрын
@@georgiaboy1579 definitely no difference in butt dyno. Just sound.
@EnragedSeaCowАй бұрын
i was torn between Spintech and Black Widow. I have heard Jones makes nice sounding mufflers too. i have a fresh 331 getting ready to be tuned. (aces Killshot)
@ChadFlanagan-fw1ehАй бұрын
Black widow for sure
@ConcussedGamingАй бұрын
Not a better sounding muffler on the planet than a Spin tech. Thrush comes next but Magnafools and Cherry bombs and all the other shit are exactly that. SHIT. people just want loud and obnoxious and those mufflers offer that. I want something that doesn't make everything sound like a misfiring SBC 350 going through a tunnel.
@natet1227Ай бұрын
@@ConcussedGaming I agree, they sound great on literally everything. I’m probably going to put a set on my cammed Tahoe next. It currently has a welded thrush on it now.
@Scrappile5.0Ай бұрын
I would say the Dynomax ultra flows would sound good. Mine has jegs knockoff 2 chambers on it. I hate them but they were on sale for $19.99 each. I would love to have single chambers on it.
@JasonStAmandАй бұрын
If you could find a set of MAC Flowpath mufflers, they are the best-sounding mufflers. Unfortunately, MAC is not around anymore. The other muffler I would love to hear is the Dynomax Ultra Flo Welded. The 10 series flow monsters would sound great on my 92 LX running 40 series mufflers currently!
@natet1227Ай бұрын
@@JasonStAmand I would be willing to give the round Ultra Flows a try if that’s what you’re talking about. They look pretty nice too.
@christurner5473Ай бұрын
That beautiful piece of machinery sounds perfect
@nothanks81Ай бұрын
Alot of the branded stuff are generic china mufflers now. You want aggressive the little 6644 total flow bullets are hard to beat. I use them in x pipes as resonnators to knock some drone out of the the hooker vr304 Mufflers there kits came with. I grabbed a couple of the blackheart swap kits as they blew them out since they dropped those from production.
@marlboromountАй бұрын
I put spintechs on all of my small block fords. They just have a killer sound.
@THE-SHOPАй бұрын
Sounds good. I bet the black widow would sound sweet. TheCraig909 puts them on everything and has a different sound than anything else.
@natet1227Ай бұрын
Yea I watched his videos a ton before i pulled the trigger on the Spintech's. The Black Widow's do sound rowdy.
@chrislangley47242 ай бұрын
Did u bring them to the machine shop
@natet12272 ай бұрын
I did not. Hopefully I don't regret it.
@ATCTrikeGuy032 ай бұрын
Back when mustangs still ruled the streets instead of killing crowds mustangs died after the fox 🦊
@zoomzoom87043 ай бұрын
Thank you
@natet12273 ай бұрын
You’re welcome!
@shaun30823 ай бұрын
I’m converting a 5.0 roller cam engine to carb but want to keep serpentine setup just like yours. Are your water pump, alternator, and crank pulleys from a 1985 mustang? Thanks and it looks great
@natet12273 ай бұрын
This engine came out of a 87. But I believe 85 pulleys are the same.
@shaun30823 ай бұрын
If you were to add power steering, what would your options be with your belt routing/setup?
@joshmaddox56823 ай бұрын
I’m going to try this before i spend $62 on LMR thank you for the video
@TheNiz733 ай бұрын
Beautiful car got a minty 1990 LX myself almost the same color. I really like the sunken headlights on those early models. Thing sounds great.
@JoseEspinoza-bj6th3 ай бұрын
Did you just change the cam? What about the push rods,rockers and lifters? Did you keep everything stock?
@natet12273 ай бұрын
Yes. The B-303 is designed to go into a stock engine. I could have put better valve springs in but I keep it under 6K RPM and have a another engine I'm building with better parts.
@JoseEspinoza-bj6th3 ай бұрын
@natet1227 oh nice I was asking cause I just got me a b303, comp rocker , push rods and lifters but I can't figure it out cause the rockers I got don't fit. My fix is a 88 and I guess those rockers need are for a older fox
@natet12273 ай бұрын
@@JoseEspinoza-bj6th you probably have stud mount rockers and need pedestal mount rockers. My stock ones have been doing fine for a couple years now.
@JoseEspinoza-bj6th3 ай бұрын
Damm bro you are right. I was checking it out and that's what I need in order for these rockers to work
@MrTL3wis3 ай бұрын
Good enough to impress Jr!
@natet12273 ай бұрын
That was my friends boy. I think he is a senior this year. He just finished building a engine with his dad for their GTO.
@THE-SHOP4 ай бұрын
Heads do look really nice! 👍🏼
@natet12274 ай бұрын
I’m impressed with them so far.
@huntinfit4 ай бұрын
Next time take one of those binder magnets you have and put it in front of the bolt you are trimming down and it'll help catch some of the metal shavings 🤙
@ILLUMINASTyGAMERz5 ай бұрын
Did you replace the resonator or the actual muffler at the end ? That could be the reason it sounds bad . A glass pack is a resonator not a muffler .
@doctorcountersteer65805 ай бұрын
A 9 inch will drag that 8.8 sideways by ONE factory wheel stud! Of course we do hear em say it ain't what you build it's HOW you build it!! (I won't even let an 8.8 IN MY SHOP! 😊)
@doctorcountersteer65805 ай бұрын
Why a body would EVER choose anything other than a 9 inch is beyond me
@davidsanderson79485 ай бұрын
Coolant isn’t just coolant. It also raises the boiling point of water and protects internals from being damaged by water, even if distilled.
@plebesidewayzzz39565 ай бұрын
What’s the part number on this I can’t find it
@trentdawg28325 ай бұрын
I think you got the wrong rotation on your water pump….did you verify it is clock wise……if not what model is that water pump for…i need a clockwise serp pump
@natet12275 ай бұрын
I believe it was for a 82 mustang 5.0. If I remember correctly pre 85 mustangs were clockwise rotation.
@ricksgt20126 ай бұрын
Sounds great
@ricksgt20126 ай бұрын
Will make more power without the flowmasters. Flowmasters dont flow.
@michaelwilliams4346 ай бұрын
What's the power #'s like
@MultigunTexas6 ай бұрын
What’s the exhaust set up?
@natet12276 ай бұрын
MAC equal length shorties, 2.5 O/R h pipe, Flow Monster single chamber mufflers with dumps.
@mosthatedmenace86737 ай бұрын
what gears are you running ?
@natet12277 ай бұрын
3.08. Currently swapping to 4.10.
@seethesvt8 ай бұрын
That sounds like shit. Like a farting tractor. Definitely not gonna buy those. Thanks for the video.
@natet12275 ай бұрын
I agree!
@kenpecora75268 ай бұрын
What water pump pulley did you use? Is it ribbed for the serpentine belt?
@HaydenShitshow8 ай бұрын
did this just simply bolt right up?
@natet12278 ай бұрын
Yes, I bought the bolt kit they sell separately so I didn’t have to try to re-use the original ones.
@Mac_Made9 ай бұрын
That seems like a lot for the little driving you did. I think you’re right about the blow by
@thewraith63609 ай бұрын
Any link for that universal joint for the steering shaft?