2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@roybm3124 2 ай бұрын
Good idea, these 3d emblems are very brittle.
@bigboss3698 2 ай бұрын
I have the same issue with my gigabyte rtx 4060 gaming oc. Everything worked just fine until yesterday when i noticed that the rgb on the gpu is turned off and since then i can't turn it on. When turning on the pc the rgb flashes for a sec and then goes off again. I know that this might be stupid question but do i need to install aorus software since my motherboard is AsRock?
@romerome28 4 ай бұрын
Any updates on this, is there anyone able to fix this issue? Same thing for me, did same troubleshooting tried to re-seat the GPU, reflash vbios, DDU the Nvidia drivers uninstall and reinstall Aorus Engine and RBG Fusion on my Aorus Master RTX3070, still can't have it recognize my GPU on RGB Fusion. After installing Aorus Engine and did that firmware update my GPU LCD and RGB goes off. I was able to fix the LCD but no luck in fixing the RGB's. Hoping there's a fix to this.
@Boosted8O8 4 ай бұрын
My golf r is right hand drive and the kit i got is for left hand drive i doubt it will work
@will803 4 ай бұрын
Looks great in my opinion can you do an update video
@kevinshin07 4 ай бұрын
Hi, I have sold the vehicle but the buyer was happy with what I did to the vehicle.
@will803 4 ай бұрын
Great video
@Celeste_owo 4 ай бұрын
What kind of fuid we use
@TheMalhazar 6 ай бұрын
Hi. If your engine takes 5.7 liter, do you add 300ml of ceratec on top of that or you count ceratec as part of oil, meaning 5.4 liter of motul engine oil + 300ml of ceratec?
@kevinshin07 6 ай бұрын
If your engine takes 5.7L of oil. Use 5.4L of engine oil + 300ml of Ceratec
@KerKoy 6 ай бұрын
I’m wondering how that paint held up since u didn’t do any prep like sanding or even scuffing? I’m about to try painting mine but I think I’ll wet sand lightly first. 👍🏾
@kevinshin07 6 ай бұрын
The paint held up pretty good. The paint did chip with rocks hitting it. Only thing I would do differently is painting when it's warm outside. I do recommend sanding or scuffing the material before but we didn't have any sandpaper and he was okay with painting without sanding the surface.
@KerKoy 6 ай бұрын
@@kevinshin07 appreciate the reply! Yeah can’t really prevent the rock chips, but at least the paint didn’t flake or peel or anything right! 👍🏾 I’ll probably do more clear coats in an attempt to protect the paint from road rash.
@luckymex58 6 ай бұрын
The link is no good
@raykupal 7 ай бұрын
6:52 😬
@seabomb1 8 ай бұрын
Is it difficult to pull out?
@kevinshin07 8 ай бұрын
No, it wasn't difficult at all. Just be careful so you don't break the tabs.
@WladimirGarrido-le1ue 8 ай бұрын
That cpu cooler was enough for that cpu? I'm thinking to buy it but idk
@kevinshin07 8 ай бұрын
I have to say this CPU cooler has been working very well! I haven't had any problems
@tipstrickshumour2146 8 ай бұрын
Thanks so much man! Took me 10mins to do thanks to this video Very easy and concise straight to the point Legend!!
@fumiot 9 ай бұрын
Thank you Kevin. Much appreciated.
@mediajaringsport 10 ай бұрын
Failed to upgrade firmware , RX 6600 XT gaming oc pro. :( still not detect in RGB fusion
@topphotocolor3580 17 күн бұрын
The same situation for me have you found a solution
@thespecialist786 10 ай бұрын
Dude you just messed up the vents grills. Center ones all broken
@kevinshin07 10 ай бұрын
How did I mess up the vents grills? Actually, none of them are broken.
@thespecialist786 10 ай бұрын
@@kevinshin07 look at the center vent left side it’s all bent. Time lapse 5:15 - 15:16. Can’t believe you actually broke the vents that is so easy to remove.
@kevinshin07 10 ай бұрын
It just looks like it. Nothing was bent or broken. I would have said something on the video if I did that. No need to worry about it. Everything is working properly.
@GREENDIAMONDNEWS2012 11 ай бұрын
subscribed
@shrimpu Жыл бұрын
I plan to use KillMat on doors and hatch areas but I wonder for the cargo/spare tire area if it would be easier to use a sprayable product... due to the spare tire well not being flat. Did you not do the rear hatch? That's one of the biggest hollow areas of the Forester.
@kevinshin07 Жыл бұрын
If you have the roller to apply the KillMat, it shouldn't be hard to do the cargo/spare tire area. I think the sprayable product is more work as you have to make sure it doesn't overspray. We did the rear hatch, it wasn't too bad to remove the hatch panel. It definitely makes a lot of difference as even when you close the trunk, the sound is much better.
@shrimpu Жыл бұрын
@@kevinshin07 Thanks so much. Can you give me some basic steps on how to start removing the panels of the hatch? I am a bit nervous to start that part
@kevinshin07 Жыл бұрын
@shrimpu there should be videos on KZbin you should be able to follow. Make sure to do it with plastic trim removal tool if it's your first time
@garrettgriggs9712 Жыл бұрын
Great video. I was having anxiety watching you though in regards to those battery terminals. Be careful putting tools so close to the positive terminal and the body of the car.
@johnnyle149 Жыл бұрын
I watched your video and installed it your way. Very happy with the result. Thank you!
@kevinshin07 Жыл бұрын
Thanks for watching!
@ADPeguero Жыл бұрын
I lucked out with the side windows. My auto detailer tinted mines just fine. Others have looked at it and are totally impressed. Unfortunately the guy passed away shortly after doing it. Wheels: 18" Enkei Tuning TM7s in Storm Grey. Tires: Continental ExtremeContact Sport 02 in 235x18x40. Huge difference in comfort over the stock 19". No more bubbles when hitting pot holes. Also, OBDEleven. Get that if you haven't. It brings new life to our cars. I have a Red 2018 mk7.5. Also got the power folding mirrors. There's so much comfort and tech stuff you can activate with OBDEleven.
@ADPeguero Жыл бұрын
I like your solution. However, I use a ProClip that attaches to the molding to the right of the cubby. On that ProClip I added one of those MagSafe chargers. I run the USB 3.0 cable for iPhone 15 Pro Max along the right side of the center console fastened with some black gaff tape and plug the USB end to a thin profile USB lighter adapter. For the Wireless Apple CarPlay I use a Calinkit 5.0 dongle connected to the USB port in the cubby. It works like a charm.
@1974rabj Жыл бұрын
Thank you for the information!
@arbenzh Жыл бұрын
Golf 18 start stop
@Moose_vk Жыл бұрын
God dammit Kevin, you called the Forester SG X an XT, a cardinal sin 💀😆
@8rosehip Жыл бұрын
😊 very good
@AntonenBirten Жыл бұрын
I just updated the firmware like you showed. Didn't uninstall Ourus engine actually and it still worked. Thanks a lot!
@mohishossy4801 Жыл бұрын
Where do I get a plug and play kit for a Mk 7.5 r
@fursuits Жыл бұрын
Never buying from them again lol
@derekg.415 Жыл бұрын
Would an Auros 3070 ti fit in this case??
@kevinshin07 Жыл бұрын
I don't think so. I think that graphic card might be way too tight. You might have to disassemble the case to install the graphic card.
@TheLipencjone Жыл бұрын
great vid u are help me a lot...big thumbs up for u.thank u
@knightsforever6446 Жыл бұрын
Just wondering what temps do you get using that cooler, idle and with a load.
@cassandraowens3518 Жыл бұрын
What was the total amount of time this took you? Nice work!
@kevinshin07 Жыл бұрын
It took about 3 hours as I did struggle reinstalling some of the plastic panels.
@daniveliqi Жыл бұрын
Greetings from the Netherlands! Do you notice any changes with the car ahen you add liquid molly ceratec?
@kevinshin07 Жыл бұрын
Hey! I haven't felt changes to how the car behaves. It behaves basically the same. Just protection around the components for wear protection.
@elite0303 Жыл бұрын
Nice job dude Hello from Belgium, I was searching another guy using the Motul 5w30 xclean+. I always used 5w30 Castrol edge LL and 5w40 liqui moly molygen in my mk7 gti, I will try for the first time the Motul one. Thank you for your video
@kevinshin07 Жыл бұрын
Thank you for watching! I really like using Motul 5W30 XClean+. I don't like using Castrol so I haven't used that in my Golf R.
@naumansiddiqui4685 Жыл бұрын
How are thermals like with the 212 evo on r7 5800x?
@kevinshin07 Жыл бұрын
I am pretty impressed with Hyper 212 EVO V2. I haven't had any problems with CPU getting too hot with heavy load.
@XanderRnG Жыл бұрын
@@kevinshin07 Can you do a read out what kind of temps youre getting while gaming or stress testing, would help me a lot. THX :D
@joshhartman7420 Жыл бұрын
Yeah that a non turbo motor if its an XT than its not the original motor
@FrankSerrano Жыл бұрын
All I needed was to know where this filter was at lol
@kevinshin07 Жыл бұрын
Sadly some of the transmissions don't have serviceable filters, that was the case with this car.
@jeffreyizelaar6284 Жыл бұрын
The link dont work
@kevinshin07 Жыл бұрын
Unfortunately, it looks like the seller has stopped selling that product.
@1_luismm Жыл бұрын
Is the cooling good with that cpu cooler? I have the same cpu
@kevinshin07 Жыл бұрын
Depends on what kind of fans you use. I am using Noctua fans so it definitely helps with cooling the CPU. I think they are great. Also, this is one of the tallest ones that I can fit in my PC. If you can fit something taller, there are other great options out there.
@1_luismm Жыл бұрын
@@kevinshin07 alright thanks, I’m having an issue where every time I try to load mw2 it restarts my pc , thought it was my cpu cooler at first but realized it wasn’t because I tried a different game and it worked. I’ve loaded and played red redemption with no problem
@kevinshin07 Жыл бұрын
@@1_luismm That is very strange. I suggest downloading Revo Unistaller Free version and then doing a proper clean uninstall and then installing again to see if that problem is still there or not.
@will8681 Жыл бұрын
Great job! How many sq ft of the Kilmat did you use?
@kevinshin07 Жыл бұрын
Thanks! I used about 25sq/ft of the Kilmat. I used a lot of leftover ones to fill small areas.
@fabr3331 Жыл бұрын
I see that at 20:45 you cutted the video... I'm also facing trouble to mount that part back
@kevinshin07 Жыл бұрын
Are you talking about the cubby portion? If that is the case, sometimes you have to wiggle up and down until it sits in properly to push it in.
@Yagierman Жыл бұрын
No intercooler= no turbo= na subaru Forester
@dallaspersonalshopping2299 Жыл бұрын
nope, msi is the same 3070ti gamingX
@kevinshin07 Жыл бұрын
That's terrible.
@keendabank517 Жыл бұрын
Wow
@erebostd Жыл бұрын
Very interesting, thanks for showing! Was wondering how to install this 👍👍
@gooeykev Жыл бұрын
I couldn’t figure out how to get the button piece out 😑
@kevinshin07 Жыл бұрын
Buttons have to be pushed out from the back side after the trims have been removed. Not much of force needed.
@gooeykev Жыл бұрын
@@kevinshin07 I tried to get it out but it doesn’t want to budge
@RoninBeaver 9 ай бұрын
@@gooeykev Same man, I tried to install mine today on a MK7.5 GTI and the buttons were definitely clipped in vs. just hanging out there. Gave up and said fuck it before I broke something.
@gooeykev 9 ай бұрын
@@RoninBeaver it was such a pain to get out I was afraid I was gonna break that shit lol. VW really don’t want you messing with the vehicle.
@kevinshin07 9 ай бұрын
@gooeykev make sure to do it when it's warm than when it's cold. You will break them.
@Dragos276 Жыл бұрын
Thanks for the video. Very well explained. Took me 10 minutes to do it for my Golf 7.
@murdermatic Жыл бұрын
Looks great bro....I prefer to mount the mb on without a cooler, install the psu, plug in the cables and then the cooler .....makes life so much easier
@kevinshin07 Жыл бұрын
That's what I was going to do but it didn't work well when I tried as it's pretty tight. Everyone has different ways of installing I guess.