Automaz

Пікірлер

@fortyseventwo 5 күн бұрын

Looking great! I wish my factory MPHAS went as low as yours. Loving the height.

@Automaz_ 5 күн бұрын

Thank you!! Ride quality/ performance between springs and coilovers are so different. If you want a more capable ride with full adjustability I’d highly recommend getting some coilovers

@CapnT87 7 күн бұрын

Do you know if they offer a chrome tip option?

@Automaz_ 7 күн бұрын

If you contact masteryofartanddesign on IG they can let you know

@karlkarl5733 8 күн бұрын

What about headlight height? Did you have to modify level sensor?

@Automaz_ 8 күн бұрын

I didn’t bother to adjust the headlight height … if anything it’d be a marginal difference. There are a lot of videos out on KZbin to check headlight height with a blank wall at your garage and some tape. I did it with my last car

@ryanmattson1735 8 күн бұрын

Its road and track, not race and track

@Automaz_ 8 күн бұрын

Good call !

@joemoe6793 9 күн бұрын

looks perfect. Any lower will look ghetto.

@Automaz_ 9 күн бұрын

Thanks man !

@philixlin9723 11 күн бұрын

Thanks for the video! I have a 2024 g82 and I was thinking about dropping it with h&r sport springs and I’m wondering what’s your take on that? Are coilovers that much better than springs to justify the price?

@Automaz_ 11 күн бұрын

The price difference is definitely justified. With a coilover system you’re getting the entire setup which is optimized to perform cohesively. With springs you’re just aesthetically lowering the car. I would always say go with the full coilover setup

@andrewscott2592 12 күн бұрын

I'm loving the stance

@Automaz_ 12 күн бұрын

Thank you !

@bkny6798 12 күн бұрын

Off video question..What rear spoiler do you have and where did you get it? Thank you

@Automaz_ 12 күн бұрын

It’s the MHC “m4 style” rear trunk lip from r44 performance bro

@situm3700 13 күн бұрын

"walking on wood sound" is probably because of tire rubbing on plastic inner fender part. Best fix option is to buy R44 enhanced clearance arch kit for g8x.

@Automaz_ 13 күн бұрын

It wasn’t the fender arch, that was already addressed before coilovers went in check 4:55 marker of the video to see that. In my case the sound was just due to the geometry of the car changing. I kept the front low as is and slightly raised the rear which completely eliminated the noise

@xxthehuskycaboosexx 13 күн бұрын

Appreciate that you said the 3 things up front! Instead of dilly dallying like most of these car KZbinrs do lol. As much as I would love to lower my m4, the roads In my area are complete garbage, no way my car would survive lowered 💀 * edit Lmao we both lost the tire lottery and got pirellis 💀💀

@Automaz_ 13 күн бұрын

Appreciate the feedback bro! Not trying to waste anyone’s time haha, as a KZbin watcher myself I always hope for the answer right at the beginning and then if I want to continue watching I will so I’m just trying to do content from that perspective 😅 My pirellis only have like one season left on them LOL my rears are pretty worn after only 4000 miles

@xxthehuskycaboosexx 13 күн бұрын

@@Automaz_ LMAO damn bro, constant RWD burnouts or what 😭😭😂 Your content is dope bro, keep doing what you’re doing and you’ll be at the top in no time! 💪🏼😤

@youknowimwhite 13 күн бұрын

Blew the welds off the intake manifold

@Automaz_ 13 күн бұрын

Lolll what

@Zuritapatrick 13 күн бұрын

nice fitment nice height, will you do wheels?

@Automaz_ 13 күн бұрын

Thanks bro! I’m going to drop another video about my whole tire and winter setup issue haha. But I decided to make my OEM wheels the winter setup and I’m thinking about get M4 CS rims as the summer set

@SteveSuric 13 күн бұрын

What was the final drop numbers? How many millimeters front/back? Steering response and ride quality better than stock? Do you meet the EDC function? Thank you.

@Automaz_ 13 күн бұрын

Since I adjusted so many times I unfortunately don’t have the final drop numbers. I am completely flush on the front and then almost completely flush on the rear. It’s a significant drop from stock ride height. Ride quality is even BETTER than it was stock. I am running the Ohlins on the stiffer setting (I did 8 clicks, 10 is recommended, smaller the number the more stiff). The car is very planted, cornering capability feels more confident, and not sloppy over bumps. I purchased the EDC cancel kit , it’s a plug in so you do not get any errors on the iDrive. EDC buttons don’t do anything now

@JerkFace62 13 күн бұрын

Did you get an error with the headlights ? Or did you have to readjust the headlights after installing your coils ?

@vour6654 13 күн бұрын

Anybody have a solid option for the XDrive 24 M4 lowering springs? I've heard so many things about all lower springs. I don't want any rubbing. Thanks!

@Automaz_ 13 күн бұрын

KW HAS kit will get you the lowest drop. I would’ve gone with that if I didn’t do coilovers. In terms of rubbing, you just need to purchase the little fender clearance piece. Cut the fins in your finder liner and put the little clearance piece as I did. You can watch the 4:55 marker of this video to see what that looks like

@vour6654 13 күн бұрын

@@Automaz_ Thank you, appreciate it man.

@Automaz_ 13 күн бұрын

🫡

@G82Watts 13 күн бұрын

I love how u explained the 3 things right away.. so what ended up being the issue and how did u solve it?

@Automaz_ 13 күн бұрын

It was just the geometry of the car in my case. As soon as I raised the rear a bit more all the noise went away. If I drop the rear some more with helper springs there may be noise again but at that point I’d try to correct it by installing some SPL outer tie rods and such. It varies case by case but this is all normal and not the fault of the coilovers or springs

@G82Watts 13 күн бұрын

@Automaz_ u don't need to lower it anymore it looks really good.

@Automaz_ 13 күн бұрын

Appreciate it bro 🫡🫡

@Japplesnap 13 күн бұрын

They all settle. Some more than others, but they all settle.

@Automaz_ 13 күн бұрын

From my experience on my last 3 cars, they didn’t settle enough to be considered impactful to me

@Japplesnap 13 күн бұрын

@Automaz_ Sorry, but you have no basis for an opinion. Why? Simple--- you admitted in your video that you adjusted your ride height after installing your coilovers. If you left them untouched for several months, they would 100% settle. You just weren't patient enough to leave them alone and then you claimed that they didn't settle. It doesn't happen that quickly. You're clearly new to lowering cars.

@amdee2505 13 күн бұрын

What's the name of the grill?

@Automaz_ 13 күн бұрын

SOOQOO V2

@charlesgordon2741 13 күн бұрын

what front grill is that?

@Automaz_ 13 күн бұрын

SOOQOO V2

@mikedenkinger9570 13 күн бұрын

My Dinan suspensions on my E36 and E46 M3's settled over the years. Just put on a CarBahn coilover/monoballs/camber plates/toelinks with blokers and there is a slight creak from the rear end but nothing like what you're hearing. Also took it back and confirmed all was tightened down. Such is life.

@Automaz_ 13 күн бұрын

Yeah I was super concerned when I heard it haha but glad I was able to get it resolved. Hopefully you get yours sorted out or it just goes away on its own. These are the headaches we choose to take on when modifying but so worth it

@ModifiedMercedes 13 күн бұрын

Your car is 🔥🔥🔥💪🏾😁🤜🏾

@Automaz_ 13 күн бұрын

Thank you broooo 🫡🫡🫡

@jonathanrobertson1350 13 күн бұрын

The car looks perfect this way. Don't care for the slammed look. I had HAS springs on my g80 m3 rwd and it made all kinds of noises. Took them off and just went with Eibach springs all around . Car handles better and I'm not scraping everywhere. I'm not holding up traffic doing acrobat getting in and out of everywhere.

@Automaz_ 13 күн бұрын

The sideway maneuver to avoid the speed bumps 😂😂😂

@Solo-Traveler357 13 күн бұрын

I have the g82 2025 m4 and there is no way I’m lowering it. To each his own. Your car looks great brother.. keep of the great work.

@jtab5392 14 күн бұрын

Looks good. Go any lower and your going to have problems, ride quality will go down...

@Automaz_ 13 күн бұрын

Thanks bro!

@huechan4461 14 күн бұрын

Absolutely stunning man! I also have a 2025 and found you through the Uniden R8 hardwired install video so I really have to thank you for that! Are you running spacers by chance and what size? Also in love with your grille, what is that?!?!

@Automaz_ 14 күн бұрын

Glad I could help bro! I’m running 15 mm spacers all around. The grille is the SOOQOO V2 carbon grille. I’ll be putting on a front lip next

@huechan4461 14 күн бұрын

@@Automaz_ Thanks brother!! I'd be looking forward that that vid and insight on lip clearance while lowered. Considering how much I want to 'touch' my individual maritime blue haha

@Automaz_ 14 күн бұрын

Modding makes the soul happy 😂

@hollaz2 14 күн бұрын

Congrats on your purchase. Just remember you own the car, not the other way around. Enjoy it w/o stressing too much about the small stuff, they won't matter in the long run.

@Automaz_ 13 күн бұрын

100%%%

@Nabeel-vu6tz 14 күн бұрын

🔥🔥

@Automaz_ 14 күн бұрын

🫡🫡

@bdh821 14 күн бұрын

Adjustable tie rods.. the factory fixed length tie rods attached to your sway bar is designed for factory height suspension. You’ll need adjustable ones

@Automaz_ 14 күн бұрын

I have SPL front outer tie rods purchased. I was going to install them along with the Millway monoballs. However since the noise went away after raising the rear I decided not to install them. If I lower the rear more with the helper springs I may get the outer tie rods and monoballs installed

@PhildoTBaggins 14 күн бұрын

Car is looking and sounding great! I had a very similar creak on a previous car and it turned out to be the Top Hat Bearing.

@Automaz_ 14 күн бұрын

Thank you bro! Trying to tastefully mod it haha. I initially thought about top hat and such but all my OEM components only had 3000 miles on them … I was getting so frustrated 😂

@Feledwards 15 күн бұрын

Only option that I know I’m picking is the carbon ceramic brakes and ventilated seats - no carbon buckets for me. Order will be placed soon.

@Automaz_ 14 күн бұрын

Congrats! You’re going to love the car

@WherestheLogic297 18 күн бұрын

Just ordered a completely base m3. Thanks for helping

@Automaz_ 14 күн бұрын

Congrats on your order !!

@spk8989pl 21 күн бұрын

Stunning. Ordered mine this week but bucket seats, do you find them tiring or bearable on longer trips?

@Automaz_ 14 күн бұрын

I love the seats!! Super comfy in my opinion. Congrats on your order !!

@miguelcancel_ 22 күн бұрын

Loved it bro, waiting for next video 👀🔥

@Automaz_ 14 күн бұрын

Thanks bro! New video has dropped haha

@GhostBH.G82 28 күн бұрын

beautiful car brother and congrats you got the carbon fiber buckets too lol the unlock animation is so dope i posted a video of mine too

@Automaz_ 14 күн бұрын

I was so excited when I saw that animation for the first time 😂

@Automaz_ 14 күн бұрын

Thanks bro!

@alanincentraljersey 29 күн бұрын

1) I thought about getting the seats, but it was a bitch getting in and out of the G80. So far, you are 0 for 1. 2) Executive package. You nailed that 1. 1 for 2. 3) Full Marino leather. Yes, huge difference, 2 for 3. 4) Parking Assist, yes again. 3 for 4. 5) Shadowline Lights. Definitely, 4 for 5, not bad. I went with Tanzanite Blue II, this is very personal of course. Brooklyn Gray is cool. I'm not a fan of Alcantara wheels and I bought the Professional Driving Package. I passed on the Carbon brakes too, I'm not tracking my car. I did the Carbon Exterior Package. Driver Assistance Package, for sure. Nice review, great car.

@Automaz_ 29 күн бұрын

Great spec you got there!! I like tanzanite blue especially in the sun

@bizzybezz 29 күн бұрын

Buckets are the worse lol, i've been in it, and I wasn't comfortable personally, so it varies on everybody. . nice car tho. I own bmws I love them but hate all the add ons they make u pay for. I got BK grey on my x3 it's a great color and hides a lot of dirt

@Automaz_ 14 күн бұрын

Yeah it’s all preference bro! Team Brooklyn Grey haha

@JB-j2y Ай бұрын

Thats cool brother

@Automaz_ Ай бұрын

🫡

@jerryberr921 Ай бұрын

What’s the difference between resonated and the non-resonated midpipe?

@Automaz_ Ай бұрын

Resonator gets rid of a lot of that unwanted noise / rasp

@jerryberr921 Ай бұрын

@ thank you for clarifying that, MAD definitely have the best value over other brand exhaust

@stevenmccoy7224 Ай бұрын

Need some low man. I’m sure you have it in the works

@Automaz_ Ай бұрын

Currently on coilovers brotha . Video will be going up next 👀👀

@DLSJ5 Ай бұрын

Great vid, very helpful, thank you!

@Automaz_ Ай бұрын

Glad the video was helpful !

@jerryberr921 Ай бұрын

Sounds so good, if I install the MAD muffler will I still need the vale controller to make it 100% open?

@Automaz_ Ай бұрын

Yeah you need the valve controller with any exhaust that utilizes the OEM harness to get its full potential out

@nickedwards4787 Ай бұрын

Looking at installing the door projector lights is that the correct part number for a G82 M4 LCI? I’m in the UK and the dealers here claim there isn’t a part listed for my car. Although I can buy the same part number you show in your clip from BMW parts.

@Automaz_ Ай бұрын

The same part I showed you Will work because I also have a g82 LCI They are actually the same for all g8x

@nickedwards4787 Ай бұрын

@@Automaz_perfect thank you.

@_CHOCHI_ Ай бұрын

What grill is that on the G80?

@Automaz_ Ай бұрын

Vorsteiner from IND

@Top_g80comp Ай бұрын

Do a cold start and drive by video 🦾🩶💯

@Automaz_ Ай бұрын

Will do

@LeoCal 2 ай бұрын

get that foam out of there lol... and get the actual grommet part# 07-14-7-140-849... by the way whats the easiest way to remove those plastic grommets?.. from inside the trunk or outside?... i dont get bmw decisions to go from rubber to plastic.

@thesharperb47 2 ай бұрын

Bro how do you get that black Lincoln license plate looks so good

@Automaz_ 2 ай бұрын

Haha bro I just had to take it off and put the normal Illinois plate on

@dudu5400 2 ай бұрын

post one when driving plz im on the fence on getting same setup

@Automaz_ 2 ай бұрын

I’ll try to get an in cabin driving one up

@bkny6798 2 ай бұрын

Nice setup man.. What did the mid pipe and axleback cost to install? Did you lower and put spacers on your car? Looks great dude..

@Automaz_ 2 ай бұрын

I paid a little more because I did them separately so I could see the difference each part made but it shouldn’t be too bad for a catback install in your area. I lowered the car on Ohlins Coilovers and put 15 mm spacers all around. I’ll be dropping that video once I get the car dialed in. I still need to drop it a bit

@Automaz_ 2 ай бұрын

Thanks man!

@fortyseventwo 2 ай бұрын

The car is looking and sounding great!

@Automaz_ 2 ай бұрын

Thank you!!

@keremakyuz1839 2 ай бұрын

The Alcantara steering wheel looks sportier and cooler, I must say, but it gets dirty really quickly if you don’t pay attention. That’s why I think a leather wheel seems like a more reasonable choice.

@Automaz_ 2 ай бұрын

Yeahhh I’m a little extra careful before I grab that wheel haha

@delhiwala9875 2 ай бұрын

Lung grill looking good

@Automaz_ 2 ай бұрын

Lungs lolll I’ve never heard someone put it like that and I can’t unsee it now 😂

@delhiwala9875 2 ай бұрын

@@Automaz_ used to be kidney bro but now its lung grill

@Automaz_ 2 ай бұрын

😂

@Top_g80comp Ай бұрын

Lungs ?😂….. that’s a first 🤘

Ең жақсы KZbin

Пікірлер