Great video thanks for the view Of the mgoc exhaust i think it is just the right sound for the tf With out being over the top 👍

Great video.

Can't wait to try this. Thank you!!

I don't think it's the foam, but the glue. On the tonneau and hard top a water based glue was used. A wash and it will melt away.

Brilliant, if the airbag deploys whatever sits in the holder flies in the face of the passenger. Is that even homologated?

Never use PVC. Surgical tubing only PVC turns into hard plastic in the winter and it cuts up the factory seal.

Fitted the straps to my roof years ago but periodically lubricate the pivot point to keep the smooth opening of the roof

looking forward to owning my own tf, ive been watching all your videos to see what kind of options there are to fix up and modify the car! As a small tip btw for the flickering light in the video it will be fixed if you match the shutterspeed of the camera with the lights, for the uk this would be 25/50 fps!

A very clear and concise video. Very helpful. Have a subscriber :)

Mine's is in the wash now, before my wife gets home. Then, I need some new plastic rods, as I have one only and it's bent in the middle. Thanks for the video.

Thanks video very helpful, rear badge as per video,used a trim pry tool on front(badge is in a recess) to help get the dental floss behind the badge.Also used it to help remove badge,no paint damage and IPA to remove adhesive. Dental floss a great tip btw.

I've just done this on my MG TF but just realised I didn't remove the buts before fitting the new gaskets. I just pushed the gasket over the nuts. Do you think I should do it again or will it be ok?

So easy. Thanks for sharing. I love the gas struts on your bonnet. Would they fit on an MGF too?

Just fitted mine, video a great help, as instructions not too detailed. Thanks..

Really great tip 👍and you'd never guess about the guaranteed boot leek being the rear light unit gaskets till someone tells you which will save you money as its a simple diy job.

Just get an mx5 instead 😂

I have been watching your videos and I want to thank you for your help, time and effort in making these. They are truly informative and very helpful and your instructions are especially helpful and an excellent guide to the novices like me. 😊

Just found this will have to get a set, cheers

How much of a difference is the air filter change? Is it worth doing in general? Or just doing when required. Thanks :)

Why did you leave a gap at the corner?

Do you leave the original nuts on the threads or do they get replaced by the ones that come with the covers?

What do you use to clean the metal at around 8:30? The boot of my TF has the same leakage problem so I'm thinking about replacing the seals.

This also works with the hardtop!

How do you call the tool (black plastic) to get the vent out of the dash?

Great video! How long did this fix last for you?

Should they be the other way up so the Velcro join is additionally supported by the roof fabric? ?

The guy that does 3d printed sunvisors extension, has printed some for me. Top bloke

Just watched your video again, great stuff. Can I ask a non related question. I noticed you have a perspex wind deflector. can i ask how you rate them and are they riged when driving at speed

I'm going to fit bmw z3 sunvisors with an ebay kit

Thanks a lot 👍

Great video, unfortunately link is given item Sold!! 😞 Trying to contact seller, perhaps we can make more !!

These do look good. Thanks for the video. I have replaced the original ones on my MGF with second hand visors from an Alfa GTV, which screwed straight in and look pretty good. I 3D printed up blocks that filled the original pits in the windscreen frame, which the Alpha mounts didn't fill. If anyone wants to try this, I'm happy to share the printer files.

We clearly state in our ebay listing, that it is important to lubricate the roof frame pivot points (hinges) with oil (NOT WD40!) as you open/close as they become stiff, when dried out?

This popped up at just the right time 😊 i was thinking of spraying on a contact adhesive, then a layer of felt & trim to fit. The washing machine is a lot easier

what size did you use?

just went to fit my brace, should have checked first as have older air intake duct so will need to change this first, will teach me for assuming that its the same as your version.

Nice video, thanks for posting, did mine today, existing foam was a complete mess and more or less disintegrated. I used some 'Sticky Stuff Remover' to get rid of the sticky residue, worked a treat. Wouldn't have even thought to look for this seal had I not seen your video so thanks very much, another little job done 🙂👍

Hi - looks good! Just bought the bracket and will fit when it’s warmer in my garage🥶 Noticed your snazzy bonnet struts! Do you mind me asking where you acquired them please? I’ll check if you’ve done a fitment video. Keep up the good work👍

I designed a 3D file for these and my son printed them off for me on his resin printer and they work well.

Thank you for splitting this into chapters and labeling them. It meant I could completely skip over Mike Brewer without missing anything useful. I can't stand that gobby cnut..

By the time these start to appreciate there won’t be any fuel 😂. The way I see it, you either buy a clean low mileage one with no problems or don’t bother

Thanks for this. Popped mine in the washing machine for 2 hours on low rpm and low temperature. And it looks like new!

Thank you. I've seen a photo guide but it was hard to see exactly what to do, this is much clearer.

i watched it and im defniitly gonna try this with my mgf, just something i was wondering is: does it actually work?

If you buy a ticket does it come with free breakdown cover. That way you still get to the show. 🤔

Great video. Thanks. I ordered this and not yet got around to it on my LE500 👍

greetings friend, where can I get the transparent deflector like the one you have? if you are so kind to answer me

Nice video dude, thanks. Almost finished getting mine ready for MOT after being sat for a couple of years :-)

Allow 24hrs from primer to topcoat

I had a similar problem with my tonneau. I laid it out upside down on a flat surface and with a garden hose and a small scrubbing brush I pressure washed while gently rubbing with scrubbing brush , all of the broken down foam rubber just oozed though the netting cover , and when it dried it was perfect. Oh ..then I realised my car had chrome metal hoops so that was a useless exercise. I won’t use the excuse that I am into my eighties but I will use the fact that I have only had the car two months. Cheers and thanks I do enjoy your helpful posts.