2 жыл бұрын
2 жыл бұрын
Пікірлер
@marksystemed4678 5 күн бұрын
Just did mine this at 4h30 inthe morning, couldn't wait til my day off to do them. One of my old lights was cracked anyway .Makes a world of difference, the led's look really cool.
@jonnystewart5380 21 күн бұрын
Thanks dude, was looking for a video on this, done it today as good as new cheers
@jonnystewart5380 21 күн бұрын
Thanks dude, was looking for a video on this, done it today as good as new cheers
@ashleyhazell662 28 күн бұрын
Nice work dude, just picked up an MR2 and this'll be really hrlpful, next job for me!
@jonathanmatinez Ай бұрын
Awesome video. I have a toyota Matrix. Same Corolla. Driver side vent blow heat the middle 2 Windows vent blow a little warn and pasanger side went blow cold as f@<€ great information brother 👌
@juanlanda2441 Ай бұрын
I was hoping ut could be used as a manual isolater for an extra battery.
@ModorFix Ай бұрын
@juanlanda2441 it can be used for that if required. Just wire it to the earth of the extra battery
@jaggass Ай бұрын
I see why you got another steering wheel. I have a Corolla with a steering wheel that's in pretty good nick but has faded so going to stick on a replacement steering wheel on until i get the original re trimmed.
@scotteverett7834 Ай бұрын
3 years later and your vids are still helping me with my cube!! My back box has done the exact same thing as yours did. Got a repalcement but no bolts, searched on YT for back box fix videos and here you are again, got m8 flanged bolts coming so all sorted. Thanks again for the videos!! 👍🏻
@peterfranco6610 Ай бұрын
Mate, soak the Pistons in a tiny amount of MEK (Methyl-Ethyle Ketone), just enough to cover the crown. (make sure that shit doesn't get on your head gasket! It'll eat it.) When you are ready to empty it, flush the cylinders with water *Heavily*. Then keep the plugs out for purging, as usual. Then drain. Obviously, keep it super slow when oiling back up.
@ModorFix Ай бұрын
@peterfranco6610 would this free up the oil control rings?
@peterfranco6610 23 күн бұрын
@@ModorFix Yes, if they are carbon locked. However, if they are rust locked, you'll have to use a vinegar *Safest* (Or Diluted Muriatic acid soak. ***User beware***, this will eat your cylinder walls to some degree.) All acids will eat metal, so this is only used for "fuck it, everything else is too expensive." situations.
@wazzyboy7661 2 ай бұрын
@modorfix I have the same digital heater but i can't increase the heater fan speed, i can lower the speed but can't increase it, any Idea what it could be please. thanks.
@hkgkagami 2 ай бұрын
Hi i replaced the sod and it worked then its completely not folding.. i swapped left and right the sod, the new sod seems working fine. you have any idea how to test the wiring on the folding motor?
@okanpetekkaya7183 23 күн бұрын
Hi, did you find a solution?
@hkgkagami 22 күн бұрын
@ seems the motor itself blown or stuck, i didnt manage to open it up…theres a spring under a star clip to reach the motor which I have no idea how to open and putting it back
@Freeman-g3c 2 ай бұрын
Thanks heaps ! Peace and love from australia
@FROST20091978 2 ай бұрын
Hi, i bought 6 years ago the same LEDs bulbs to 300zx z32 (plastic adapter) . Only this model fits to Z32 with H3 ( I tried with others ...philips, qerk etc but there was a problem with assembly ). But !!! if this bulb is to fit well you have to bend the springs a bit because they interfere with the housing of LED. The effect is that the bulb is bent. that's why the bulb has some play
@rahulnadkarni-h4v 2 ай бұрын
Love it. Have subscribed. Quick question. Did you have to inform the car insurance company about the modification (is it required to do so)? Thank you. 🙏
@ModorFix 2 ай бұрын
@rahulnadkarni-h4v it's a cosmetic mod. I think you should inform the insurance company about all mods. However, this one is cheaper than oem and serves the same purpose, so the insurance company wouldn't be paying out any more than they need to. All insurances places are different. Speak to them and see what they say.
@TheGupex 2 ай бұрын
Thank bro🎉.
@alessiozaccheo7447 3 ай бұрын
Grazie amico❤
@HobTecCars 3 ай бұрын
Have the same parasite drain on my MR2 MK2, thanks for showcasing your solution, will try the same on mine!
@ModorFix 3 ай бұрын
@HobTecCars it's not a diagnosis? But a good solution. More recently I have found these shut off devices which use a key fob. Have tested one and it works a treat. Yet to live with it and see. Watch this space
@loeasida 3 ай бұрын
I would think a handmade paper gasket + spray gasket sealer to both surfaces would be a much more effective oil sealent, than gasket-goop applied to one area around the tensioner. Think. With the goop applied, you no longer have two level--true--mating surfaces. The tensioner is no longer lying flat against two machined mating surfaces. Paper gasket material (from auto parts store) cut-to-measure + Permatex spray gasket adhesive, adds a proper sticky--EVEN--layer to both mating surfaces. That is how any apprentice machinist would approach this problem.
@cb8491 3 ай бұрын
I have a Black GTR with Scratch Shield. It's the worst paint ever. Scratches, marring, swirl marks and forget trying to polish it.
@ModorFix 3 ай бұрын
@@cb8491 does yours self heal?
@cb8491 3 ай бұрын
@@ModorFix Absolutely not lol. It's terrible, worst paint I've ever had on a car. I am a detailing enthusiast too, and it's impossible to correct and polish. May as well just accept it and get it resprayed at some point with no scratch shield.
@ModorFix 3 ай бұрын
@@cb8491 ever confronted Nissan about it? My lot didn't even know it existed lol!
@maxdatsun 3 ай бұрын
Yours seems to JDM like mine. What headlight did you install in there? H4?
@junebrooks665 3 ай бұрын
How about over filling the complete engine with thinners or similar to the brim? for a few days, then drain the sump out to the unit, remove all the spark plug Leeds and turn the engine over to blow the crap out of the oil rings and other holes. Then thoroughly flush out the engine and re-oil it and see if it runs well recommended amo... just a thought lol
@_underscore_2381 3 ай бұрын
Thanks for that!
@ericlafrance6350 4 ай бұрын
I used this stuff on a oil burning lawnmer and my quad and both have made the engine run like new for years
@bullsaye7 4 ай бұрын
What model is this?
@ModorFix 4 ай бұрын
@@bullsaye7 type this description in amazon. "2G 64G Android Single Din Car Stereo with Wireless CarPlay/Android Auto, Rimoody 6.86 Inch Touch Screen, Bluetooth, GPS Navigation, FM/RDS, Mirror Link, Dual USB, Backup Camera". Made by rimoody. Gone up in price a little.
@amber300c 4 ай бұрын
Which thinner did you use, which thinner is best to use? How about STP injector cleaner, any good?
@ModorFix 4 ай бұрын
@@amber300c I used paint thinner. Cellulose. I hear gunwash is better as it also has acetone in it. However, use with caution!!! Lol!
@amber300c 4 ай бұрын
@@ModorFix thanks 👍
@bilokenneth 4 ай бұрын
Interesting that you roll it back and forth instead of turning the crank with a socket! But do you know if I can just roll it downhill in one direction instead of pushing it back and forth?
@ModorFix 4 ай бұрын
@bilokenneth yeah, I wouldn't roll it down a hill lol!
@marniuszek 4 ай бұрын
Thanks buddy ❤
@capt.Justin 4 ай бұрын
Same thing happened to my march
@ModorFix 4 ай бұрын
@@capt.Justin it could be welded up if you could be bothered.
@capt.Justin 26 күн бұрын
@@ModorFix I bought an aftermarket exhaust. 3inch sound amazing
@mujahidimran2714 4 ай бұрын
Hi im having issues installing the screen. If i have my Sony xav ax 3250 connected the air con display will not come on and if I connect the air con display the screen will not come on. Please help. Would help if you could add all parts you bought into the description of the video. Great content btw keep it up!
@ModorFix 4 ай бұрын
@@mujahidimran2714 have you got the connects loom and patch cable?
@mujahidimran2714 4 ай бұрын
@@ModorFix yes I purchased Honda Civic 2005 - 2012 SONY Car Stereo Steering Wheel & Aerial Kit CTSHO002AA off eBay
@ModorFix 4 ай бұрын
@mujahidimran2714 just had a look at that and it's the right wiring with the patch lead. Not sure what the issue could be. If everything is wired correctly it should work the way I showed.
@mujahidimran2714 4 ай бұрын
@@ModorFix is there a difference between the one I’ve bought and CTSHO002 Honda Civic FN Hatch 2005-2012 Steering Stalk Adaptor FREE PATCH
@ModorFix 4 ай бұрын
@mujahidimran2714 this is the description of the one I bought. EONON JOYING Stalk Steering Control With Aerial Adaptor For Honda Civic 2005-12
@overbuiltautomotive1299 4 ай бұрын
valvoline restore and protect oil works new chemical they invented love that stuff ..drill out oil hole good mod on some pistons
@goochi5544 4 ай бұрын
i use an ultrasonic cl;eaner to help remove the carbon deposits while it is soaked in solvents
@ciprianiuga1203 4 ай бұрын
Thank you! How can you make it show the date instead of radio / aux?
@NexaRecordsNSPNexaMusic 5 ай бұрын
Thank you!!!
@JohnSDoe-hg1vj 5 ай бұрын
Hi, Dan. Have you done a video on auto-folding mirrors upon pressing a car's remote lock button? Can't find it. Cheers.
@ModorFix 5 ай бұрын
@JohnSDoe-hg1vj I have shot the footage yes. Need to get the video out. I will try get it out in the next couple of weeks.
@JohnSDoe-hg1vj 5 ай бұрын
@@ModorFix Thanks, Dan. Will be waiting.
@RolandasLiuteris 5 ай бұрын
When can we expect the video of this head unit ?
@ModorFix 5 ай бұрын
In the next couple of weeks. I haven't fitted the fascia yet, trying to source one which I can modify ;)
@kevinmikaere48 5 ай бұрын
Hey hi have o6 cube just wander where or what side silver washer goes thanks
@anunknowndude 5 ай бұрын
You should have swapped the seat rails and it would have been a cleaner job
@ModorFix 5 ай бұрын
Can you outline how you change them over for the people who see this comment, might help them :)
@anunknowndude 5 ай бұрын
@@ModorFix sure... The seat is bolted to the rails, like 4 bolts. The back rest is held to the rails by 4 more bolts. Pretty straight forward job. The most important part of the procedure is to not break the plastic tabs. Once broken, you have to replace the plastic trim, there is not really a fix for that. Try not to mess with the back rest inclination while doing the job
@ModorFix 5 ай бұрын
@anunknowndude doesnt sound very straight forward lol! I guess people can choose which way to do it now. At least they have the option.
@anunknowndude 5 ай бұрын
@@ModorFix it's just 8 bolts, I've done it, you just need to be careful... It's one of the simplest jobs you can do., just be careful
@Andyyyayy 3 ай бұрын
@@anunknowndudeDo the corolla seat rails just bolt right up to the celica seats?
@ellzgoespro6568 6 ай бұрын
That foamy look to the fluid typically means there is air getting in the system somewhere. I don't think it should do that simply because the cap is off. I had an old Honda Pilot that did the same thing and had a bad whine to it and the fix was to replace some o-rings. I'm curious if that's possible on the Z32?
@ModorFix 6 ай бұрын
That was nearly 2 years ago and it works just like it should now. I think the air bubbles were introduced when I disconnected the pipe and released a load of the old fluid. When I put the new fluid in, no doubt it would have had some trapped air in there.
@super_hondas 6 ай бұрын
The S2000 badges on the wings are still available. It may be worth getting a set and then following the badge locating arrangement, critical to make it look right.
@bigben5246 5 ай бұрын
agreed, I spent ages measuring the correct placement and it has to be right (no S upside-down for starters!) LHT do a template that locates on the indicator kzbin.info/www/bejne/bYPNeXuQbLhgmtE
@super_hondas 5 ай бұрын
@@bigben5246 yes, I follow LHT videos quite a lot. Have done many enhancements to my S2000, but spent way more than yourself, however my objective is to get the car to be the best it can be
@MrMelton77 6 ай бұрын
Enjoying the series. Great methodical way of going through the issues with the car.
@ModorFix 6 ай бұрын
That reminds me i need to drop episode 3!
@pauljackson8247 6 ай бұрын
Hey there, I’m a Toyota mechanic and this is the correct procedure for adjusting the handbrake. Good luck!!! 👍🏻👊🏻👊🏻 MR2 (RM762E) BRAKE - PARKING BRAKE LEVER PARKING BRAKE LEVER ON-VEHICLE INSPECTION Parking brake lever travel at 196 N (20 kgf, 44.1 Ibf): 5 - 8 clicks If incorrect, adjust the parking brake. 2. IF NECESSARY, ADJUST PARKING BRAKE (a) Remove the console box. (b) Loosen the lock nut and loosen the adjusting nut until the left and right parking brake cranks touch the stopper pin. (c) Start the engine and depress the brake pedal with the thread force at about 490 N (50 kgf, 110 Ibf) for 10 times. (d) Tighten the adjusting nut until the cable has no loose- ness. (e) (f) (g) (h) Pull the parking brake lever up strongly once. Release the parking brake lever. Turn the adjusting nut until the lever travel is correct. Tighten the lock nut. Torque: 5.4 N-m (55 kgf-cm, 48 in.-Ibf) (i) Release the parking brake lever and check the brake drag of the rear brake by turning the rear wheel. () Check that the left and right brake cranks touch the stopper pin under the condition in which the parking brake lever is released. (k) Check that the brake indicator light comes on when operating the parking brake lever. (1) Install the console box.
@ModorFix 6 ай бұрын
Appreciate the write up Paul. How would you measure the pressure you put on the pedal?
@pauljackson8247 6 ай бұрын
@@ModorFix 🤣🤣🤣 with out special tools you have to guesstimate, after watching all of the videos that people have put on here I thought I would pitch in as I’ve had problems with a customers Mr2 and as it’s not a common caliper on Toyotas as we have in board handbrake shoes normally so most of us don’t actually know about this, I’m self-employed so went back to where I used to work and spoke to the top tech there and he didn’t even know how to do it so he went on Toyotas system and sent it to me, this is copied word for word from the service bulletin 👍🏻
@s2kuk 6 ай бұрын
Looking forward to the rest of the series Dan!!
@erikaepler8597 6 ай бұрын
That is some insane work to retrofit Android Auto.... Thanks a lot for that. Just bought a MK8 Civic, wanting to upgrade the radio, I think I need to prepare a fair bit before I'll tackle this project. Will probably install a handsfree and a backup cam like you but this is sooo much work. Thanks for showing. Well explained!
@ModorFix 6 ай бұрын
I make these videos how I would have liked them explained to me. Sp I'm glad you find them useful 😀
@joe653 6 ай бұрын
Legend mate, just about to do this but was skeptical about how to turn it over at the crank. Will just rock it in 4th and hope it goes well 🙏
@colinhanrahan4845 7 ай бұрын
Out of curiosity would it be possible to swap the rails over and avoid bending and cutting
@ModorFix 7 ай бұрын
Anything is possible. But may required welding
@anunknowndude 5 ай бұрын
Its the simpler opción, swap the rails and be done in a couple hours... those pegs are absolutely necessary
@wishybishy 7 ай бұрын
Hello mate, thanks for posting this video. I've recently purchased a 300ZX Twin Turbo and really want some BOV's. The usual "forums" strongly advise against it due to the MAF, then I found GFB's website and went down a slight rabbit hole. Assuming you still have them, have you had any issues since the video? And do you know the difference between MACH 2's and their normal "universal" range?
@ModorFix 7 ай бұрын
The reason people advise against BOV's is because they usually vent to the atmosphere, creating that whoosh sound everyone knows and loves. However, that lovely air that is expelled causes a mis-match in the ecu as to what the MAF registered coming in, and what is actually in the system, this causes over fuelling. With a standard MAF in place, best to get this style of BOV which re-circulates the air. That's why I went for the GFB. The stock ones recirculate, however they get weak over time and can leak too.
@ModorFix 7 ай бұрын
To answer the second part of your question, I am not sure what you mean by "normal" range. However, the main thing I can think of is that the Mach 2 has adjustment on the tension of the spring. This allows the BOV to not open early and hence hold the boost for longer until it really needs to dump
@wishybishy 7 ай бұрын
I'm very grateful for your responses! What I meant by "normal" - on the GFB website, they have a "universal" BOV listed for the 300, as well as the MACH 2. So wasn't sure if you knew what the difference was as visually, the look the exact same.
@ModorFix 7 ай бұрын
@wishybishy if you filter on 300zx it only shows the mach 2 and the deceptor. To answer your other question, it's a great bov. I have one on the 200sx too. No issues
@wishybishy 7 ай бұрын
Just coming back to this, as my 300 is now at a garage being worked on, have you got any videos of how they sound?
@fc7535 7 ай бұрын
Made in China Too loud and not omologated for legally road use. Don't waste your money
@ModorFix 7 ай бұрын
I only used them for about 1 year and it was my wknd toy. If you plan to have these on a daily then maybe you have a point. Malian have managed to get a bad name for themselves in recent times with poorly made and fitting products. However, at the time of shooting this video, there was nothing bad to say about the products.
@stuartreid8782 7 ай бұрын
My display has Honda Civic where yours has the date, do you know how to change that please as I would prefer the display showing the date like yours? Thanks
@ModorFix 6 ай бұрын
not sure on that one, will have to investigate and get back to you lol! where are you located?
@t-money10 7 ай бұрын
Does anyone sell a kit for the bolts and brackets?
@ModorFix 7 ай бұрын
Not sure there is a big enough market for it bud. I have given you all the sizes (I'm sure) in the video. Ebay is your friend 😀
@anunknowndude 5 ай бұрын
Swap the seat rails, better and you dont need to buy anything
@machy1877 7 ай бұрын
Good job bro I did the same but still my steering volume control is not working 😅
@ModorFix 6 ай бұрын
did you use the connects 2 interface withe the patch lead?