srcarter3

Пікірлер

@RRdispr 4 күн бұрын

Great tutorial video...!!! What brand and size wheels are those tires? Love the look

@KingMigz 26 күн бұрын

Wonderful video, love all the details thank you.

@johnsharples4065 Ай бұрын

I believe you forgot to put the grease in. 😮

@Moothos Ай бұрын

I’ve changed these out quite a few times. Those Moogs are 18mm for both backside & nut. A ratchet wrench works well too. Also retorque at least the top nut with the car on the ground under weight load.

@RandyAtcitty 2 ай бұрын

How good is the lazer NGK do on power and gas mileage?

@srcarter3 2 ай бұрын

@@RandyAtcitty power seems fine and has milage is good. I regularly get the higher 20s, 28mph or so

@jojoray86 3 ай бұрын

What is in the tube

@tresserhomepc7360 5 ай бұрын

3 years on, how are they holding up? Just saw the sway bar vid, and they still seem perfect and not faded at all.

@srcarter3 5 ай бұрын

Yea, they've been great! They're just as bright as the day I installed them, and the housing has held up well with the weather and use throughout these past few years. I would still recommend them!

@matdon15 5 ай бұрын

Great video. Just scared me when you had your leg under the vehicle even with the jack stands.

@emelynbasalatan5003 3 ай бұрын

Safety first scare to fail the jack stand.

@cidermanone 5 ай бұрын

Thank you for the video, it's a big help

@srcarter3 5 ай бұрын

Of course! Glad it helped!

@stazzz7079 6 ай бұрын

You have to grease Moog sway bar links. They don't have enough grease inside from the factory. BTW What is the mileage of your Renegade?

@srcarter3 6 ай бұрын

This was something I wasn't 100% on. Because this particular link is both greasable and has a sealed boot. I believe there are more than one compatible Moog branded sway bar links for the renegade as well. It's been good so far, I want to say I changed them at around 115k miles or so? And I'm at 120K ish now?

@Moothos Ай бұрын

@@srcarter3 if it’s greasable then it’s not sealed

@Trebor-gw8lt 6 ай бұрын

For the love of God, get an actual floor jack.

@srcarter3 6 ай бұрын

😂 I'm good

@angelascott1809 7 ай бұрын

Thanks for the info, I see your link. Im going to give it a try. I have a 2015 and my only issue is the knob rubbing off into my hand. Time for a change.

@srcarter3 7 ай бұрын

Glad you found the link okay. I highly recommend the new knob! My only regret is not doing it sooner!!

@cameronbay9714 7 ай бұрын

Same!!!

@1rv1n30 7 ай бұрын

Fantastic, thanks!

@JustJack99 7 ай бұрын

Thanks for this, helpful! Delighted with my new momo 😁

@jeremytodd4906 9 ай бұрын

Nice video thanks, very helpful, i was expecting the old one to split in the middle like ther replacement Alfa one i bought. This one didn't just pop of though, the only thing I had that would fit was a 12T hydraulic blind bearing puller, a bit overkill!

@christopheralvarez1090 Жыл бұрын

where did you put the jack stands to support the car ? How do you think it could be jacked up without the scissor jack?

@nugget6567 Жыл бұрын

got them.. But didn't came with harness...Its not plug and play for 2022 Renegade.. You need harness also !

@srcarter3 Жыл бұрын

Did you reach out to the seller? The link on Amazon still shows it comes with a wiring harness and is plug and play for all models including 2022 models.

@jourdemayne Жыл бұрын

Thank you so much for this, both the walk though and the MOMO recommendation. I installed mine last week without issues on a 2015, and the new knob is a significant upgrade. Thanks again.

@srcarter3 Жыл бұрын

Glad it was helpful! I still love my momo to this day! Way better than the stock one!

@CCXXI Жыл бұрын

this helped immensely in my replacing my plugs, thanks so much for it.

@srcarter3 Жыл бұрын

I'm glad this helped!

@propertymanager9563 Жыл бұрын

Very helpful keep up the good work

@danielkent4671 Жыл бұрын

Awesome video. Thank you!

@joseanibal2883 Жыл бұрын

Thanks so much ❤ and yeah I was scary because sound terrible when I start my car 😂

@Actias1974 Жыл бұрын

No Torque wrench? bold choice.

@srcarter3 Жыл бұрын

If you have a torque wrench, I do recommend using it. I don't know the specified torque values though I assume they can be found online.

@Actias1974 Жыл бұрын

@@srcarter3 I should have also said this was a great video. Super clear viewing angles. Thank you!

@Jack-Surreal_Panes Жыл бұрын

On my 16 I have to go thru the radio and put the brakes in service mode, retracts the calipers.

@srcarter3 Жыл бұрын

I'm fairly certain that only needs to be done if you're working on the back breaks. Definitely can't hurt though.

@Jack-Surreal_Panes Жыл бұрын

@@srcarter3 Yes, what am doing tomorrow. Learned my lesson on an Audi. Battery was out.... Had to run 2 wires from my Jeep to make the motor retract

@Jack-Surreal_Panes Жыл бұрын

Well, that didn't go as planned. LOL. Read forums and even watched videos on 2016 trailhawk. Well, didn't need the elusive E20 on back. Lug caps swelled so had to beat 17mm sockets on and luckily I have many so 3 are still stuck on the lug. Would have been nice to know the caliper slide volts takes 2 wrenches. Today, used a 17mm and 1/2". Boot top has a nut that needs to be held while 1/2 these off bolt. 17mm for the bracket. Darn rotor stuck on so had to PB blaster it then hammer pry it off. Then the brain fart kicked in. after 30min I realized Duhhh! other way. Still in a brain fart couldn't figure why new lug bolts won't fit, lined up wrong holes. Other side took 15 min. Gotta say it stops on a dime. Got that giddy laugh when first broke hard. Back has a semi with a coated, slotted drilled rotor. These type rotors work better when needing braking power while towing and I tow frequently. I always buy cars that the volts are never the same. Everyone saying 16mm, 14mm E20...Today a 1/2 17mm..Maybe the E20 only used on front? I will say the jack points suck. Used a hydraulic and didn't have that adapter so a bit dented..

@Actias1974 Жыл бұрын

Only back brake have the e-brake that requires service mode through radio console.

@hydrelixlive4547 Жыл бұрын

How are they holding up. Any issues

@srcarter3 Жыл бұрын

Ya they've been great, no issues 👌

@SumNutOnU2b Жыл бұрын

Thank you. This was very helpful. I just got a new (uhh, used) renegade. The knob is only a little worn, not really a problem yet, but it feels like thin plastic. It just feels cheap to me and it kills the driving experience for me. I wanted to replace it even before I bought it but I was concerned that i couldn't see any screws or other obvious way to remove it without destroying anything.

@srcarter3 Жыл бұрын

Oh yeah I hope you order this momo one, it's been great, I only wish I'd done it sooner? Such a better driving experience honesty. Good luck!!

@dwaynecovey8964 Жыл бұрын

Excellent video and very helpful

@Odwalla23 Жыл бұрын

Are you in california?

@srcarter3 Жыл бұрын

I'm not. Sorry 😔

@chambalegui Жыл бұрын

Awesome :) I need to do this activity, because the mechanics I visited only do the bare minimum and can't find a problem that I think is related to the shocks.

@tonyrap3846 2 жыл бұрын

you're AWESOME

@srcarter3 2 жыл бұрын

Thank you!

@AnthonyMUmana 2 жыл бұрын

Excelent video

@buckbard 2 жыл бұрын

Thanks for the video. Clearly the design engineer was paid by the number of screws he involved! Geez.

@srcarter3 2 жыл бұрын

Haha yeah, it does seem to be a tad overkill.

@LonghornTexasFan 2 жыл бұрын

Thanks for the video. Very informative and well explained.

@howl1ng673 2 жыл бұрын

Since you’ve had these on a while, how are they holding up?

@srcarter3 2 жыл бұрын

We recently bought a second vehicle, so we've only put a few thousand miles on the jeep since I replace the pads and rotors, but they've been great! Absolutely no issues so far.

@Decoraan 2 жыл бұрын

I’m so glad someone has guidance on this. Thank you. Any specification necessary for the replacement?

@srcarter3 2 жыл бұрын

Can you clarify by what you mean by specification? This is for the manual transmission renegade, I believe they should all be the same from 2015-2018. (Not available in the US after that)

@girlwakeuppodcast4622 2 жыл бұрын

Hi changed out my Spark plugs and my Jeep shakes under the Hood it's no longer stalling or Stopping just shaking like crazy and has a weird rough hatd airy sound only 54,000 miles on my 2.4 2017 Jeep Renegade.

@srcarter3 2 жыл бұрын

Hmm... Have you had the engine mounts looked at?

@chifhaaji4518 2 жыл бұрын

Check your connections

@goriarell 11 ай бұрын

Check your Oxygen Sensors as well.

@girlwakeuppodcast4622 11 ай бұрын

@@goriarell I sold the Jeep back in June too many problems

@deannaballard1382 2 жыл бұрын

Very thorough. Thanks a lot!

@michael027100 2 жыл бұрын

A good and even cheaper item to replace the rubber insert socket is a magnetic wand, just use a long tool to brush the plug off when you have it settled in the well. Worked for my 2013 Corolla. And be careful removing the ignition plug!!! If you drop any part of that (like a copper spring) it will cause the plug to misfire and your vehicle will shake violently, but not to cause any worry as you can easily reassemble the ignition plug, just be careful not to lose any part of it.

@dreambigboy 2 жыл бұрын

What about the plug that was connected to the signal?

@srcarter3 2 жыл бұрын

You don't end up using that anymore, so that wiring basically is just hanging out in the engine bay.

@andredomke9222 Жыл бұрын

And why don't you use the original plug of the turning light?

@juanpavlov3645 2 жыл бұрын

very good video. I wanted to know about a suitable adapter for the knob and what is the size . thanks

@srcarter3 2 жыл бұрын

I've love the Momo. Should have done it years ago, honestly!

@CodewebTecnologia 2 жыл бұрын

Very Nice, thanks!

@jgelien21 2 жыл бұрын

Looks great! Thank you for video. Putting these on my yellow ‘17 renegade

@srcarter3 2 жыл бұрын

Awesome! The smoked signals will look great on the yellow I bet!

@frankiegarcia2488 2 жыл бұрын

Thank you!

@frankiegarcia2488 2 жыл бұрын

Thank you!

@imarin85 2 жыл бұрын

what wheel and tire setup did you put on? i have the same color renegade in a 2019 and been looking for a new black wheel setup like yours

@srcarter3 2 жыл бұрын

I bought Vision Cross wheels (www.discounttire.com/buy-wheels/vision-cross) with Falken Wildpeak AT Trail tires (www.discounttire.com/buy-tires/falken-wildpeak-a-t-trail/p/80711)

@LGW3-Orchids-Exotics 2 жыл бұрын

Are the NPK spark plugs pre-gapped? I assume so if they are OEM.

@srcarter3 2 жыл бұрын

Yes, the ones in the video (and links) are pre gapped!

@clacoda 2 жыл бұрын

Excelente video saludos desde chile 🇨🇱 👍🏼

@davidbrum5164 2 жыл бұрын

Thank you so much for your video I just replaced my stock with these yesterday im in London (England) you video was so so helpful , I had one small additional issue the notch that the metal clip goes back into on the unit of mine was too wide so I had to grind back a bit on it like the small cross notch one you did , all works, fits and looks much cooler, once again thank you for taking the time to do your video otherwise I would have struggled knowing what to do

@jhongiraldo8562 2 жыл бұрын

Thanks so much, very good explanation 👍🏻

@memekapu 2 жыл бұрын

Thank you for info.

Ең жақсы KZbin

Пікірлер