Love the truck but those ugly rims have got to go in the garbage
@daxcor24 күн бұрын
where are the other parts! Would have love to see the rest of the work.
@kentstephens47702 ай бұрын
Kinda talking to you huh?
@Bosch7582 ай бұрын
Kewl beans …
@miguelgameiro80632 ай бұрын
Work in progress?
@bill26homzy3 ай бұрын
what kit did you get i just ordered the 3-5" rear did you shim the axle 4* or 6* ?
@okspeedshop4 ай бұрын
Dang that sounds good what cam is it
@DirtNeckGarage4 ай бұрын
Sounds great but sounds like its idling around 400 rpm.
@KGisthenameman4 ай бұрын
The song of my people.
@didiemmanuel5705 ай бұрын
Where did you get the rims
@pthrelkeld0906 ай бұрын
You can use as much or as little of a patch pannel as you need to, thats why they come over size, to be able to fit any size repair. So what im sayin is you dont have to go up any higher than an inch past the rust line
@garycamara99556 ай бұрын
What cam is that? Sounds like mine. I have a Winfield 1A
@tonyrandazzoe82106 ай бұрын
Hey....you dont depict where we find part 3 of this vid.great job tho!
@jerryjulius60716 ай бұрын
Currently building a 327, length pushrod did that cam require?
@langekickchris6 ай бұрын
Unfortunately I don't remember. It's best to get a pushrod length checker for proper Rocker arm geometry.
@nicklifewithnickanlex7227 ай бұрын
What lift is the cam
@user-wu2yi2fu7h7 ай бұрын
Not really my style but this truck looks and sounds really Awsome! Be proud your hard work paid off.
@RomeIntheGarageRestoMod7 ай бұрын
That’s smooth
@RomeIntheGarageRestoMod7 ай бұрын
Denibbing tool to remove the runs and defects
@eddieneffplaylist24998 ай бұрын
It's for pin stripes
@KGisthename8 ай бұрын
What kind of exhaust are you running brother
@KGisthename8 ай бұрын
Yo man that is so perfect!
@btucampbell15918 ай бұрын
What all do you have to get done to cam a SBC I want to cam my 84 c10 but idk where to start
@jacobhall68569 ай бұрын
What wheels are those?
@lsfab46079 ай бұрын
These are a GM transport wheel. 22" steel wheels.
@jacksonfowler167410 ай бұрын
What exhaust do you have on the truck?
@lsfab460710 ай бұрын
Just some Jones mufflers. 2.5"
@jamesmedina211910 ай бұрын
Nice color
@FaQ2.010 ай бұрын
MUSIC TO MY EARS! 👍👍
@chriswalker677610 ай бұрын
I had a third stage cam that sounded like that. 535 competition cam I believe it was back in the day
@brandonthompson548811 ай бұрын
He bought it that way and has no idea what the name of this cam is
@langekickchris11 ай бұрын
Erson Hydraulic Flat Tappet E110046
@Say_lesss11 ай бұрын
What a juicy pig 🐖
@bourbonator932011 ай бұрын
Those wheels are proof that God doesn't exist
@langekickchris11 ай бұрын
Yup! The Devil is Real..
@KGisthename8 ай бұрын
What do you mean by that?
@BIGBO1988s1011 ай бұрын
Sounds like a comp big mother thumper
@langekickchris11 ай бұрын
Erson Hydraulic Flat Tappet E110046
@abduljo630211 ай бұрын
What cam 🔥
@langekickchris11 ай бұрын
Erson Hydraulic Flat Tappet E110046
@user-yr2re3vr4j11 ай бұрын
That sounds really clean
@fjb9234 Жыл бұрын
9 out of 10 on the video. One point deducted for loud music compared to dialogue audio level.
@apsine2.016 Жыл бұрын
what cam
@langekickchris11 ай бұрын
Erson Hydraulic Flat Tappet E110046
@apsine2.016 Жыл бұрын
what can
@langekickchris11 ай бұрын
Erson Hydraulic Flat Tappet E110046
@bigcountry1758 Жыл бұрын
Came out really nice now. Is that as low as the Coil overs would let you go or could you go lower?
@langekickchris Жыл бұрын
That was as low without rubbing tires at the rear and or a having a c notch.
@milesmathews7108 Жыл бұрын
Man I wish I had this video 2 years ago! Great video very clean and to the point. I hate that the kit came with almost no instructions. Keep the good work up!
@langekickchris Жыл бұрын
Thanks Miles! Glad you enjoyed.
@petwillcox3934 Жыл бұрын
*promosm*
@richardbutterfoss2353 Жыл бұрын
I will buy it! The best car they ever made! Amazing! RWB ❤🎉
@revanvalentine2024 Жыл бұрын
Maaaan chill
@bigdozer2157 Жыл бұрын
WOOOOW, THANK YOU!!! I bought the entire CPP kit and sadly it did not come with any instructions. Your video was just what I needed to complete the job.
@langekickchris Жыл бұрын
Awesome! It was difficult without instructions as well. Glad it helped!
@ogwalkonwater1562 Жыл бұрын
That’s my rap music ✊🏾
@SpiritedWrenchers Жыл бұрын
Thanks for the install video. In the middle of installing these right now on our 72 and couldn't find any better at the time. Hoping to fix that with an episode of our own. One request if you do more on these, which would be a HUGE help for kits where they give us multiple bags of bolts and no instructions as to what goes where, could you point that out in the video? CPP has done a very poor job with their instructions in my opinion and they don't even have any for the front coilover kit. Thanks once again for your time and effort. Cheers!
@langekickchris Жыл бұрын
I have a part 2 on my channel. Hope the video helps. I found it difficult as well with no instructions but instead a digital picture. I guessed on some bolts and even had to remove and swap cause of the same reason. Well worth the struggle.
@SpiritedWrenchers Жыл бұрын
@@langekickchris great to hear. Thanks for the reply and insight. Much appreciated.
@jacobhouse9197 Жыл бұрын
Yessss I need to know what cam this issss!!!
@langekickchris11 ай бұрын
Erson Hydraulic Flat Tappet E110046
@mr.motivation17577 ай бұрын
@langekickchris will it work with a stock chevy 350?
@KGisthenameman4 ай бұрын
@mr.motivation1757 yes but you shouldnt. Always contact the manufacturer and take their advice. That is the best advice one could give you. If they think you need springs, timing chain etc ask them if they sell a kit and that would be the best way to success and make sure you break it in correctly.
@gordocarbo3 ай бұрын
@@KGisthenameman Agree. Taking advice from random people on the internet rather than calling the mfr is foolish!
@hustlinghard808111 күн бұрын
It sounds amazing but probably runs like ass. I want a loopy cam but they cause your vehicle to run horrible.
@rickb8538 Жыл бұрын
When does Part 3 come out??????
@gerardolopez5875 Жыл бұрын
Its this the cab that eas restored???
@MiguelHernandez-oc8mh Жыл бұрын
What brand did you go with for the long tube headers
@lsfab4607 Жыл бұрын
Flowtech. They fit excellent!
@jeffrey4547 Жыл бұрын
i have a 68 rust free air condition cab just sitting with a bunch of extra parts like box doors 3/4 ton frame and running gear but my kid took the front clip plus have a set of floor pans, cab corners and kicker panels with backing all new got them for free with all the other parts. i was collecting parts for a bit and ended up getting a 68 rust free clean body factory paint with full chrome trim and rebuilt 327 and 400 turbo got it for a 1000 bucks. i don't like sbc so i put a stroke 454 with a 02xx 400r turbo good to 800 hp stock just needs final paint and interior dun
@langekickchris Жыл бұрын
Nice! You in Canada, is the other cab for sale?
@jeffrey4547 Жыл бұрын
@@langekickchris i live in oregon but i do like trades need a set of 12 inch wide on 15 inch rims for a 79 camaro going wide body or powder blue paint with silver paint for ss stripes and primer sealer call me the budget king trying to build the camaro for free got most of the parts and 3 z28's and a stroke 454 with a 02xx trans all free also have new interior for it was in one of the cars i got x show car they pulled the engine and trans gave me the rest of it