Hi, recently i bought a teischord D-1, it sound but the vibrato doesnt work, i dont know if it is the potentiometer or just the switch, what should i test to know? Could you help me? Thank you🙏🏼🙏🏼 please excuse me english, im from chile🙌🏼
@АНЕМАСТЕР3 ай бұрын
Афигеть, токарный станок точит! Срочно выложить на ютуб. Эт ж пиздец новинка!
@cmtcmt6614 ай бұрын
That is slick.
@YuvakTuladhar4 ай бұрын
Can you make that for GRBL controller machines?
@kostix7774 ай бұрын
I havent really worked with GRBL before so I dont know, but maybe if it allows enough amount of axis controlled simultaneosly.. im using the X, Z, B and C axis for this.. the 2 motors holding the hex cups are driven with 2 separate drivers by the same signal from the B axis, and the rotating wrench is the C axis. The control of it all is written in a mach 3 vb macro file.
@ferencbordacs23195 ай бұрын
Congratulation! This is absolutli cool...
@PodeCoet5 ай бұрын
I do the same thing using my wife's vinyl cutter! For more complex shapes sometimes the adhesive gets stuck on the blade and tears the shapes, I find a thin film of grease on the tip helps a lot
@kostix7775 ай бұрын
Nice tip! Thanks! This kapton film though, does not have adhesive, its just bare 5 mil thickness kapton
@maciejzuk77585 ай бұрын
WOW
@emmettogrady30856 ай бұрын
What plugins are you using?
@Manutp3476 ай бұрын
Trop bien ta technique vraiment top
@lucidekoningh7 ай бұрын
Haha! Sick jam, man!
@MinhHaiNguyen1310 ай бұрын
clever
@michaeld95410 ай бұрын
defenitly cheeper than the 1000 dollar options
@Orthophon7310 ай бұрын
Доброго времери суток. Вы нагревали резец?
@kostix77710 ай бұрын
Ya dumayu chto imenno na etoi zapisi nagrevatel' ne ispolzovalsya, prosto xolodnaya almaznaya igolka.
@danielross5108611 ай бұрын
well done.
@Amit-sp4qm Жыл бұрын
Nice .. i plan to make something similar and this was a good mechanism .. I will add actual change of cap and collet in same place with some actuators .. How dontou control the torque of open and close?
@kostix777 Жыл бұрын
The tightening and releasing is basically done by powering the nut rotating motors and let them skip.. while they are rotating/skipping cause of the tension, it kinda works like a low power impact screwdriver.. with every skip it is tightening a little bit more, and it has proven to be enough to at least hold small diameter endmills, like 3 or 4mm.. I didnt really try with thicker, but it probably will work too.
@Amit-sp4qm Жыл бұрын
@@kostix777 thanks for the info, I will try using the cheap drill machines as mechanism which also has torque control in them ..
@naengineer Жыл бұрын
its cool but is not it easier to get atc spindle?
@gianlucatomasello9492 Жыл бұрын
They cost a lot more than this
@GeorgeZaharia11 ай бұрын
they cost around 500$ a pop.... and the pro ones ... 3000$
@chrisf858410 ай бұрын
While I'm on the just get an ATC side of things, Where do you see them for 500? Cheapest I've found 1500-2000 all in. @@GeorgeZaharia
@Otakugima Жыл бұрын
Epic
@ollied1981 Жыл бұрын
That is cool 😎
@x10dc90 Жыл бұрын
Very nice sequencing of all that gear. I'm inclined to get a Beatstep Pro
@mshvsh Жыл бұрын
Круто
@AdamTheAd-vanc3d Жыл бұрын
Omfg wooooow !!!!!!❤❤❤❤
@jamess3718 Жыл бұрын
which type brand of lathe is this looking to get one myself
@aimetutorials Жыл бұрын
Hey Constantin, Would you mind sharing how you build this machine? I Am really impressed, since there is no information on lathe cutting! Thank you in advance and greetings from germany :)
@polydata Жыл бұрын
Hi, could you make one of these for my Rev 3.2?
@recvival9952 жыл бұрын
Hello! Konstantin , I am trying to buy your stereo cutter head , please I wrote you by IG, Could you answer to me please, ? Thank you in advance, :=)
@thornievoelkel74852 жыл бұрын
P𝐫O𝕞O𝓢m
@МихаилМиронов-у3х2 жыл бұрын
Добрый день! Как с Вами можно связаться?
@Liliedugg2 жыл бұрын
What were your 707's issues before you fixed it, and what did you do to fix them? I have a 707 which I thought was dead and gone, but I bought a new power adapter on eBay which was as close as I could come to the original, and I soldered an almost entirely broken wire really close to the batteries. Then I fixed the metal "strip" - sorry, I don't know the name of the part, but it's the flat metal thing actually holding the batteries, as it was rather loose, and just a tad too bent on one end. So now, all the sounds work perfectly, but I am not able to program it! As soon as I try to, the 707 starts doing all sorts of weird things, lights suddenly turns on on whichever wrong places, it does nothing of what I want it to do, and is just 100% uncooperative. Sometimes, the entire grid fills up (I've never managed to place anything on the grid myself so far), and if I try to play it, the machine does what it can to kill my eardrums, as it's playing all the sounds simultaneously (reminds me all too much of this human drummer I once had to get rid of). Very annoying. I can use it with my BSP, or any other sequencer, but I would totally prefer it to work as it should... Any tips on how to fix it would be greatly appreciated, however, please don't tell me to "just give it to the repair man", as I have no idea how to find a person that can help me fix it here in Norway... That said, your Tr-707 sounds great! I hope to be able to play mine like you do.
@matsoanderson24352 жыл бұрын
Fantastic !
@joange18422 жыл бұрын
This sounds very nice! How do your protosynth-types go? Do you still manufacture them?
@AdamTheAd-vanc3d2 жыл бұрын
These are amazing :-)
@txt.17232 жыл бұрын
How many volts and how many amps did you use?
@kostix7772 жыл бұрын
I think it was a 12V, 2amp supply or something like that.
@txt.17232 жыл бұрын
@@kostix777 thank you
@Protoxy2 жыл бұрын
Excellent
@LittleZdy2 жыл бұрын
sounds great!
@PodeCoet3 жыл бұрын
Very cool!
@AdamTheAd-vanc3d3 жыл бұрын
Pure awesomeness. Wow.
@madmettie3 жыл бұрын
what ifi wna buy one
@unknownhuman10003 жыл бұрын
This is cool. Can we see your code?
@Stefan.X.3 жыл бұрын
Can you please provide some plans to build one just like this?
@sonicatelierberlin62263 жыл бұрын
Hi me again, can you share all the information about that you made, I want to control my Prophet with midi, it will be very apreciated. Thanks in advance.
@kostix7773 жыл бұрын
Hey buddy! This was a while ago, around 4 years ago or so.. so I dont have everything very fresh and i dont have the synth as it was a repair job for a customer.., but all the needed information to do it is in the service manual. I believe it can only be done on the revision 3. I did it using an STM32 microcontroller which received MIDI, formatted the data in proper way, and send it to the prophet by a serial interface. Look for information about the "scratchpad" that stores all the current keyboard state.. the idea is to write into that memory thru the digital interface that the rev 3 provides.
@kostix7773 жыл бұрын
Otherwise, I suggest you to look into some commercial option to add midi to the P5. This is not a very beginner friendly project.
@fluna19743 жыл бұрын
code please
@leonnaffin3 жыл бұрын
Hi, where do you live I would love to be able to control my prodigy via midi. How much would this cost?
@lizichell23 жыл бұрын
Very excellent
@EthicRadioArchiveReels3 жыл бұрын
Sounds good check out our record cutting video
@whitelion79763 жыл бұрын
What material for the needle? Check my needle making video. Enjoy your new hobby of making records. From Swaziland
@EthicRadioArchiveReels3 жыл бұрын
Can you make us a homemade record cutter? Oh where can we buy one? We want to do that too bro 🙏
@EthicRadioArchiveReels3 жыл бұрын
Amazing 👏 Omg sounds s Good... can you make us a custom cutter if so let us know and how much you charge to build one for us