GO TO A MECHANIC!!!!

Muchas gracias por ese video; Donde puedo comprar la cubierta 😊

Why didnt i see that BEFORE ordering from these thiefs.

What size tire and lift do you have?

Awsome just the video i needed a reminder. Have you done a 2 wd into 4x4 mines a 92 and i'm about to pull the donor trans and tcase rear drive line , should be painless, as the motor is out already. And the tail section is missing, already used on another project. I hear I need to cut a frame member, which one if you know?

First rule of overland vehicles in the southwest, white keeps you comfortable. Black is an oven. That's the reason land cruisers have white tops.

what alt bracket is needed?

I don't know if you'll reply to this but each time I start my car it makes a single click sound do you think you know what it is? To give context one day trying to start it up the engine was cranking and then slowly stopped and ever since it won't start

Just picked up a second gen 4 door tracker

Rob how you been

Thanks Man.. Guys.. Thank You. Good straight forward trouble shooting a,b a,b explanations... Thank You. Best to you guys, and the mountains.. 🌲🌲🌲

that carving is ugly AF.

What lift are you running?

Good car for getting and going around town! I just bought a 2003 tracker for $800

dude your video quality is amazing

just or the kit from Kyle waiting for it to arrive. very excited, great video i plan to follow along!👌👌👍👍

Ye same! Mine idles for 6 hours and rarely goes over 40 km/h. Kinda the rule f thumb, check fire, then air - throttle control valve. Fuel pressure requires more equipment and time, so leave it for later. I just haven’t changed the plugs yet until I fix my blow-by, that is change the valve over gasket and the O-ring seals first the plugs. I get condensation down the plug sleeve chambers. After that, I will change the plugs, and then see what else needs to be down.

worlds smallest 4x4? the Jimnys and samurai are smaller than your tracker, but i do like your set up, we call the tracker a suzuki vitara here in new zealand, have a great day!

Where's the "Trucker"? I'm looking soooooooo forward to this build.

Do you think it would hurt the car if I used it all the time. I find my acceleration much faster when using it.

Two inch spacers.

I put a 2” lift and 265/70-16 on A 91 2dr tracker With late model Stock 16” rims works Great rubs a touch in tight turn

Very nice setup :)

History correction: the pass was built in 1953 by Cominco to facilitate the power line construction that fed the Sullivan Mine from the South Slocan generation station. It really had nothing to do with Riondel or the Blue Bell mine, which it had its own lake crossing power line. The newer logging road was connected over the top of Baker Cr x Grey CR in 1989

where can I find the two (2) back clips? I am not finding them online. The ones that the hardtop is fasten on to.

Where is part 1?

Do you know hoy to fix it if the switch doesnt works?

I slotted the top strut hole and even with the strut touching the knuckle it’s still not correct camber. Someone told me to grind down the knuckle a bit but I’m going to try one of these bolts on the bottom hole first

Are you positive on the autos having 4.60 gears? I have a 2 door manual and a 4 door auto and I can find online that it has both gear sets. So I’m not really sure what it has. I did the whole turn the drive shaft and tire and count thing and I got what looked like 2.5 rotations. But the difference between 2.3 and 2.5 rotations is kind of hard to tell when doing it quickly.

I would suggest 4.2 no matter what size tire.

Did you know I only knew about 1/2 of those? Lol good info brother hope all is well and yall have a wonderful evening.

They all need 3.1:1 tcase gears no matter what size tire lol. Awesome buggies but way under powered. Also in the front differential category you can use Jeep j10 Dana 44s and if you put f150 or CJ rotors on them your bolt pattern will match the back.

Did you know at least the first gens are offically categorized as light trucks, and in Japan is called the Escudo, and in Canada some were sold under Pontiac as the Sunrunner. Great video.

Did you have to do this to the rear too?

What size of tires do you have?

makes me sad that this is the only way to get parts :c wish suzuki came back to the usa

Wht shocks did u use for the front if u use a 2inch spacer lift? Can u use the stock shocks still

thanks for the update hope the weather gets better and you can get back to building the buggy.

Right on Rob! It's all coming together now, adjustability stability clearance, plus they will look great putting the work. Brother this is going to be great and a ton of fun. Super excited for ya good to see ya hope all is well and have a wonderful weekend.

Im sure Harry has deeper pockets than both you and I, but its a nice build. One of your new shocks cost more than what I paid for my 96 Tracker, but they look like an excellent foundation for a great build.

Im excited to see it come together. Have you seen Harry Wagners Tracker Crawler? kzbin.info/www/bejne/Z6qbqHSoYsxjbasfeature=shared

Another quick question. Have 03 2d tracker. They have kits that only offer front an resr coil spring spacer. What up with strut? Thought it had to have it as well? Thanks

Qick stupid question. I have 03 2d im doing different coils in back for a 3" with Corolla shocks. Front just 2" for now spacer. But can you do just coil spacer an leave struts along? I even see 2" coil spring spacer on line for front and rear but nothing for the strut.

Great video. How big of tires can you go with a 2” lift?

Thank you for the suggestions… really appreciated.

I built a tracker on 40s

I finally got it today! I had to slot it all the way back. The knuckle is pressed against the strut! So that's as far as it's gna go and the tires are straight up and down. Idk why it took that much. I looked everything over good and didn't see any outa place. I got another question for ya. I seen the video of were ur gna cab in that geo ur building. I been wanting to do that for a while now. I seen one on KZbin that used the back door of a 4 door tin top and I seen that u are gna do that. I'm thinking about ordering one on ebay but wanted to make sure what year would be the best or if it matters? I have the 92 tracker. The video I seen looks like them back doors fill that space up pretty good!

I have a 92 geo tracker 4wd and i put the BDS coil springs on the front to level it out and i have 33 12.50s on it and my camber is bad! Top of the tire sticks way out so i tryed camber bolts and it didn't help it at all so yesterday i slotted the struts and when i lowerd the jack it set good so i backed it up and pulled forward a few time and got out and looked at them and they went back to leaning out. So idk what the deal is . I tighten the shit out of them to. Nothing is bent under the front. Anything else i need to do?

Nice build! I bought a 95 Tracker in 98 and had it for over 20 years, just picked up another 95 again. The Bride says it is hers, but I told her we both know it is the dog's and we are just the drivers! I'm looking forward to pulling the engine for repair/refurb and refurbing the interior over the winter.

🎄❄️happy🦉holidaze❄️🎄