4 ай бұрын
5 ай бұрын
5 ай бұрын
7 ай бұрын
Пікірлер
@kiapandora2510 2 минут бұрын
Greetings from North Carolina!
@andycorbett207 7 сағат бұрын
Hello again! I have completed this - except for the motor - and it seems to be working correctly except for that middle bit (the bit with the two small ball bearings in the top). The first two balls go into the cage, when the third one hits all three balls tip backwards down that right hand slide, whereas from what I see from your video at 3:03:55 (and ROKR’s) one ball should tilt forward into the perspex “helter skelter’. So despite cranking the handle and sending all ten balls around the circuit several times, nothing ever goes down the helter skelter, they all go down the right-hand path. I’ve taken that section to pieces and reassembled. Any thoughts? Thanks for the great video!
@MartinsAssemblyHaven 6 сағат бұрын
Hey Andy, that’s brilliant that you’ve completed it, good work 😀 Would you be able to take a video of it and send it to my email, just so I can see exactly what’s going on?
@andycorbett207 5 сағат бұрын
@ Thank you friend - have emailed over!
@AndreiP-h9x 11 сағат бұрын
Hi Martin. What a great guide you have created, I find it really easy to follow. Thank you for it.
@MartinsAssemblyHaven 11 сағат бұрын
Hey Andrei, thank you so much for that, I’m delighted if I can help out and you’re more than welcome 😊
@AndreiP-h9x 8 сағат бұрын
@ Keep your great work up.
@MartinsAssemblyHaven 6 сағат бұрын
I will do and thank you again 😊
@MartinsAssemblyHaven 12 сағат бұрын
I hope you found this tutorial helpful and if you missed the unboxing of this futuristic marble run, make sure you watch it here: kzbin.info/www/bejne/qYe8kJiBYp2qnZosi=nXEk2wq6jf8wCSA5 I would also appreciate if you left a like on this video and check out this and other amazing ROKR/ model kits here: shareasale.com/r.cfm?b=2663316&u=4069976&m=106192&urllink=&afftrack= and remember to use my promo code (MARTINS15) to receive 15% off on all of their kits and enjoy.
@idk-ot5nb 21 сағат бұрын
1:13:00 what do you do if the marbles just stay in the same slot on the cam, and dont go into any of the little off slots?
@user-mb7wr4ho4s 23 сағат бұрын
Absolutely amazing this is so impressive to watch❤
@MartinsAssemblyHaven 17 сағат бұрын
Thank you so much, I’m really glad you like it, and it’s for sure one of my top 10 models, it’s so satisfying 😀
@kellemccracken8818 23 сағат бұрын
So if I melt my wax I can just dip the gears in?
@MartinsAssemblyHaven 17 сағат бұрын
You could yes, but just be careful with how thick the layer is because it could interfere with the gear connection.
@user-mb7wr4ho4s Күн бұрын
❤ love the automata kits too, just been watching them, great video productions and a great teacher there Awesome👌😀👍 From G.
@MartinsAssemblyHaven Күн бұрын
Hey Garry, thank you so much for that 😀 And yeah these automatas are something else, they’re so different to your ordinary wooden models and they’re super enjoyable to build 👌
@ChadNoticer Күн бұрын
I built this one and the Tommy gun and the tolerances and quality of these models is actually very impressive. I haven't had any problems with either they both shoot perfectly.
@MartinsAssemblyHaven Күн бұрын
I have to agree with you on that one. I haven’t built the Tommy gun yet, but the AK works magic indeed 👌
@quambafu Күн бұрын
Looks easier to build a real AR 😂
@MartinsAssemblyHaven Күн бұрын
Haha I think you’re on to something here 🤣
@andycorbett207 Күн бұрын
I’m nearing completion on this. That middle section seems to be storing two or three balls before releasing them at the same time, is that correct from your point of view? Just so I don’t panic when mine does the same!
@MartinsAssemblyHaven Күн бұрын
Hey, that’s brilliant and yeah that’s correct 😊 And if it doesn’t release them, then just loosen the sleeves slightly.
@andycorbett207 Күн бұрын
@MartinsAssemblyHaven Great thank you. I actually just found the ROKR video on their site, and it clearly shows three balls being released at the same time, two in one direction and one in the other!
@MartinsAssemblyHaven Күн бұрын
That’s correct and no problem at all, enjoy the rest of the build 😊
@66lwmorgan 2 күн бұрын
Hi Martin, you know I always prefer the real time build simply because there is always at least one section that deals me a fit unless I see exactly how it works and the video's you do in real time are perfect. I actually did this build a few months ago and like always I ran into the part that stumped me. I finally figured it out and moved on. Good luck Martin, hoping to see many more real time builds on your channel and Happy New Year my man.
@MartinsAssemblyHaven 2 күн бұрын
Hey Morgan, thank you for that, and I’m always glad to help out 😊 And that’s brilliant, I hope you enjoyed the build and it all works smoothly. And one of my subscribers had an idea of doing the tutorial for the lift, and that’s a good one as that looks slightly complicated than the actual marble run, so I might just do that and speed-build the marble run 👌 And thanks very much for that and a Happy New Year to you too 🥳🍻
@66lwmorgan 2 күн бұрын
The lift was where I had my issues. Thank Martin, take care.@MartinsAssemblyHaven
@MartinsAssemblyHaven 2 күн бұрын
Ah I see, I’m glad you sorted it out. Take care 😊
@HypnoticPhantom 2 күн бұрын
I wonder if you would do or have done the Rokr Dream Gift Factory. I think you might like it, lots of moving bits, music, gears and fiddly bits. Would love to see you put it together
@MartinsAssemblyHaven 2 күн бұрын
Hey, I haven’t done it personally but I have seen quite a few videos of the completed builds and yeah I agree it looks amazing, so much going on in it. I’m actually quite amazed and would love to build one. But I’m not sure when that will happen. I assume you’ve built one yourself? If so, did it take over 10h to build?
@Harrizeb 2 күн бұрын
This looks so much fun to make. Im going to get this kit for my husband. I would love to see a video that did a step by step on the marble lift and then a speed run on the marble run build.
@MartinsAssemblyHaven 2 күн бұрын
Hey, I agree it really does and I also like your idea tbh, especially because the lift does looks slightly more complicated than the actual marble run 🤔 Since I haven’t built it myself yet, I don’t know if I can recommend it, but it looks fun and in some videos it looks brilliant, and if you are getting it, just remember you can get 15% off 😊
@ASMRBrainiac 2 күн бұрын
Motherboard 🤣🤣🤣
@MartinsAssemblyHaven 2 күн бұрын
I just couldn’t resist 😂
@AndreiP-h9x 2 күн бұрын
Hi Martin, that was an entertaining video, thank you for the laughter. Looking forward to watching the marble run build. Take care
@MartinsAssemblyHaven 2 күн бұрын
Hey Andrei, I’m so glad you enjoyed and you’re more than welcome 😊 I’m glad you’re looking forward to it, I am too and can’t wait to see it in action 👌
@GameplayHero658 2 күн бұрын
Hahaha Minecraft got me lol
@MartinsAssemblyHaven 2 күн бұрын
I’m glad you enjoyed it 😂
@MartinsAssemblyHaven 2 күн бұрын
I hope you enjoyed this video and please leave it a like and check out this custom built PC here 🤣 shareasale.com/r.cfm?b=2663316&u=4069976&m=106192&urllink=&afftrack= and use my Promo Code: MARTINS15 to receive 15% off on all of ROKR/Robotime models and enjoy.
@GameplayHero658 2 күн бұрын
I go for fast build
@ASMRBrainiac 2 күн бұрын
@@GameplayHero658I second that.
@MartinsAssemblyHaven 2 күн бұрын
@@GameplayHero658 Thank you for your input 🙂
@MartinsAssemblyHaven 2 күн бұрын
@@ASMRBrainiac Thank you for your input 🙂
@wedoalittletrolling-im4ti 2 күн бұрын
I’m currently building my own and I’m up to 1:14:18, where the crank is supposed to control the shaft and make the marbles move up through it. The crank is very stiff and gets stuck on the shaft when it’s almost all the way up, and the marbles don’t go into the holes unless I apply some pressure to the top. I’ve tested to make sure the shaft can move freely on its own and it can fairly well. Any ideas why it seems to get stuck and not line up completely?
@MartinsAssemblyHaven 2 күн бұрын
Hey, I assume you tested it with the marbles there? If you did, it could be because when the marbles try to enter the carrier at the bottom, they kind of sometimes don’t enter fully and the carrier pushes the marble against another piece at the bottom and makes it jam until you kind of wiggle it a bit. Is that the case?
@wedoalittletrolling-im4ti 2 күн бұрын
@MartinsAssemblyHaven I think the problem might have been waxing. I was just following the directions from the book which didnt mention when and where to wax, but I'm following your video now, and I'm going to try to wax at the points that you mention.
@MartinsAssemblyHaven 2 күн бұрын
Ah I see. I do always wax anything and everything that comes in contact with other parts cause we want everything to run smooth without any friction, and I hope it works out 🤞
@idashapievsky9355 2 күн бұрын
could not do without your video, thank you
@MartinsAssemblyHaven 2 күн бұрын
Hey, you’re more than welcome 😊
@miningcrafttt1230 3 күн бұрын
observable universe, milky way galaxy, solar system, earth, north america, canada, ottawa, kanata
@MartinsAssemblyHaven 2 күн бұрын
I’m slightly confused, but I assume you’re from Canada? 🇨🇦😀
@rogerarchibald2627 3 күн бұрын
Hi Martin, just an update that I've been coming along well on this. I quickly got to the point where I usually do a step and then review that step in your video afterward. At 1:55:00 you (at first) missed the part that those shaft sleeves needed to be put on flush to the pin ends. I saw this in the manual but it was still tricky trying to maintain the position of this inside sleeves. I was amused that you inserted an edit of the process at 1:57:18 !
@MartinsAssemblyHaven 2 күн бұрын
Hey Roger, I actually left them loose on purpose and you should too, otherwise when the marbles started entering that piece, it’s supposed to tilt backwards from the marble weight and then release the marbles, but it was too tight and it didn’t move, hence the marbles got stuck basically. That’s why I left the sleeves loose 😊
@rogerarchibald2627 2 күн бұрын
@MartinsAssemblyHaven Yes. I think you mis-understood what I was saying. Not a big deal.
@MartinsAssemblyHaven 2 күн бұрын
Alright sorry. I hope your build is going well tho 😊
@rogerarchibald2627 2 күн бұрын
@MartinsAssemblyHaven Yes it is. I'm not setting any time records, but I'm not trying to! I'm definitely enjoying building this!
@MartinsAssemblyHaven 2 күн бұрын
That’s excellent and yeah definitely don’t rush and enjoy 😊
@SaucyMinx-m7q 3 күн бұрын
This makes my brain so happy
@MartinsAssemblyHaven 3 күн бұрын
That’s amazing, love it 😊
@SaucyMinx-m7q 3 күн бұрын
So cute! Get some lotion on that tiny dry nose tho!
@MartinsAssemblyHaven 3 күн бұрын
Hey, thank you so much, and he’s just the cutest thing ever 🥰🥰🥰 And unfortunately you can’t put any creams or anything at all on their skin when they’re newborns, only in the later stage. And he’s getting plenty of coconut oil these days when necessary 😊
@jonathanhieu6727 3 күн бұрын
Excellent tuto, i finished it but the motor is so hard top rotate when it off thet i can't rotate the lever. Someone have explanation?
@jonathanhieu6727 3 күн бұрын
But i can easily turn all that when I take off completely the motor
@MartinsAssemblyHaven 2 күн бұрын
Hey Jonathan, there must be something possibly in the gear connection from the motor gear to marble run gear. Or it could be possible that you may have a faulty motor.
@user-mb7wr4ho4s 3 күн бұрын
Excellent tutorial great teacher love all the products reviewed and built by Martin 👌👍👍😃
@MartinsAssemblyHaven 3 күн бұрын
Hey Garry, thank you so much for that, it’s much appreciated 😀👌
@rodadams8422 3 күн бұрын
Lovely gift Martin looks really nice Happy new year to you and family 🎉🎉🎉
@MartinsAssemblyHaven 3 күн бұрын
Hey, thank you so much Rod, and a Happy New Year to you too 🥳🥂🍾 And it really is a lovely gift, such a cool model 🤖
@muffin_man1535 3 күн бұрын
My gears aren't alligned at the end, how do you fix this issue.
@MartinsAssemblyHaven 3 күн бұрын
Hey, is it the gears that connect the cello to the actual music box or the gears just behind the bow?
@muffin_man1535 3 күн бұрын
@ the gears behind the bow
@MartinsAssemblyHaven 2 күн бұрын
Ah, that’s a pretty easy fix. It too much to explain here, but there’s a troubleshooting video for the cello on my channel that explains how to align them properly if you want to check it out 😊
@muffin_man1535 2 күн бұрын
@MartinsAssemblyHaven I ended up breaking a piece lol. It was the part that holding the cello bow down.
@muffin_man1535 2 күн бұрын
Thankfully there was an extra. Thank you so much for your help it works perfectly!
@andreweh4 4 күн бұрын
Happy New Year and many Thanks from Andy in Nova Scotia Canada!
@MartinsAssemblyHaven 3 күн бұрын
Thank you so much Andrew, and a Happy New Year to you too 🥂🍾 All the way from Canada, that’s awesome 😀
@catm7133 4 күн бұрын
🔥🔥🔥🔥🔥
@MartinsAssemblyHaven 4 күн бұрын
Hey, I’ll take it as you like it 😀
@eberhardbrosius3631 4 күн бұрын
Was kostet der Roboter, will ihn kaufen
@MartinsAssemblyHaven 4 күн бұрын
Hey, you can check it all out here 😊 www.mecrobremake.com/products/mood-bot?_pos=1&_psq=mood&_ss=e&_v=1.0
@memeharvey9771 4 күн бұрын
the big bad wolf!
@MartinsAssemblyHaven 4 күн бұрын
Hehe I know right 🐺
@davidt21 4 күн бұрын
i just built this and when i wound it up to give it a go but it stops working after a few seconds. let me try to explain what is happening. the gear's teeth on the back of the cello fit almost perfectly to the grooves of the music box gear. after a few seconds, the teeth of the cello gear no longer fit perfectly and as a result the cello gear is pushed upward along with the shaft. this friction is too great and it stops. i nudge the gear downward so that the teeth once again fit into the music box gear and it resumes but then stops again. any ideas on what i can do?
@MartinsAssemblyHaven 4 күн бұрын
Hey David, oh that’s an interesting one. I assume the gears have been sanded and waxed? I know the gear is getting pushed up, but it may help. Otherwise it possibly sounds like the cello gear is misaligned slightly, basically squint or there’s simply something on the inside too loose. It’s hard to tell without seeing it. But I would open it up to have a look 😊
@davidt21 2 күн бұрын
@martinsassemblyhaven after much deliberation I took it all apart and started from scratch. I had no idea the wax was included as it isn't listed in the parts list lol. I was also missing a piece behind the cello. I had to file down one of the teeth of the gears because it was causing the bow to jolt when it moves from right to left. It works well now :)
@MartinsAssemblyHaven 2 күн бұрын
Aahh happy days, I’m glad you went back and waxed and sanded, magic 😀
@HypnoticPhantom 5 күн бұрын
Watching you from Kalamazoo Michigan in the USA.
@MartinsAssemblyHaven 5 күн бұрын
Hey, all the way from there, that’s amazing, there quite a lot of folk from the USA here, absolutely love it 😀 I hope you’re enjoying the build 🙂
@Ducksfootpistol 5 күн бұрын
looks very good but on the side elastic bands you are meant to fold them in half so they're not loose
@MartinsAssemblyHaven 5 күн бұрын
@Ducksfootpistol Hey, it’s a great wee model and works well 😊 And trust me you don’t need to fold the bands because if you do, and you load it, it stretches the bands and it can and will break the actual bow pieces. Just speaking from experience.
@albertherrera5718 5 күн бұрын
How many rubber bands is the maximum for burst fire? Can it only hold until 10?
@MartinsAssemblyHaven 5 күн бұрын
So recommended is 10 I be think from what I remember. If you kept putting more on, you could potentially crack the tip of the AK or even slightly rip out the rubber band chuck from all the extra pressure.
@albertherrera5718 5 күн бұрын
@MartinsAssemblyHaven im thinking of buying this but im getting worried about the comments about the gun not firing right and by the looks of it im not wanting to dissasemble that thing to fix it 😂
@MartinsAssemblyHaven 5 күн бұрын
Haha that’s fair enough 😅 There are a couple of things that could affect its functions, but if you build it very carefully and do lots of sanding and waxing, you should be fine 😊 I do have a troubleshooting video for it as well that fixes the most common issues anyways 🙂
@albertherrera5718 Күн бұрын
@MartinsAssemblyHaven are the places needed to be sanded at waxed in the instruction manual? I'll look for your vids when my kit arrives at issues happens. Thanks for the reply!
@MartinsAssemblyHaven Күн бұрын
That’s not a problem, happy to help 😊 And the instructions will tell you what needs to be sanded and waxed, but a lot of times they don’t tell you to wax certain areas, so what I normally do is, I wax every piece that is in contact with another piece because we want to eliminate friction between the pieces as much as possible 🙂
@lemmecheck5651 5 күн бұрын
Where can you buy one or what website
@MartinsAssemblyHaven 5 күн бұрын
Hey, you can buy it on their website and also get 15% off if you use my promo code MARTINS15 😊 shareasale.com/r.cfm?b=2293147&u=4069976&m=106192&urllink=&afftrack= Or you can get it on Amazon if you fancy, but the promo doesn’t work there: amzn.to/40eVQK6
@greekgods7 5 күн бұрын
Hi! This was an amazing video! Thank you so much!! I appreciate it heaps. Probably wouldn't have ever made it through any of the building process. I was wondering If I could ask something... I have completed mine but anytime I try and plug it in to electricity, it runs for a while then turns off.. Is that supposed to happen? Or is something wrong with my power pack? If you could shine some insight onto this problem, it would help a bunch! Thank you!
@MartinsAssemblyHaven 5 күн бұрын
Hey, thank you so much for that, you’re more than welcome and I’m delighted I can help out 😊 About the motor, I don’t remember it randomly cutting off, so no I don’t think it’s supposed to do that. The motor could be possibly defective, or it stops working because something somewhere jams in the kit. You could always request a new motor from ROKR by stating that it’s defected 😊
@GlendaAnne-o7z 5 күн бұрын
Aug and Sept I have
@MartinsAssemblyHaven 5 күн бұрын
I’m confused 😅
@keltonclinner8960 5 күн бұрын
My motor worked on just the spaceport for a few minutes. Now it just clicks and won’t turn like it doesn’t have enough torque to run the gears. The hand crank is smooth as can be. I guess it stripped out on the inside of the motor.
@MartinsAssemblyHaven 5 күн бұрын
Hey, yeah the motor isn’t strong enough for 2 marble runs. What I’ve heard is that people get in touch with ROKR/Robotime and they ask for a new motor for the link pack, and apparently they send out a new stronger one. I haven’t done it myself but you could try 😊
@keltonclinner8960 5 күн бұрын
@MartinsAssemblyHaven My motor won’t even run the single marble run anymore. I filled out their online form so we will see what happens.
@MartinsAssemblyHaven 5 күн бұрын
Ohh that’s not so good at all 😬 I hope the replacement motor is much better 🤞
@Dysan72 5 күн бұрын
You made a slight error at 2:43:30. The outside rails are backwards. The two wings are not the same length. The longer one is supposed to go to the right. That's why yours is hitting the grey wheel, and there is a gap next to the next railing.
@MartinsAssemblyHaven 5 күн бұрын
Hey, oohh my, it’s been a while since I built this and I’ve never noticed. At least it still works great and thanks for that 😊
@Dysan72 5 күн бұрын
@MartinsAssemblyHaven Yeah almost made the same mistake on mine. I was actually surprised it wasn't called out in the instructions
@MartinsAssemblyHaven 5 күн бұрын
That’s a good point. They normally do, but at least you spotted it. I hope you’re enjoying the build 😊
@Dysan72 5 күн бұрын
@MartinsAssemblyHaven have a few quirks to work our. It works fine on manual, but with the motor it's tossing balls out occasionally. Need to figure out why.
@MartinsAssemblyHaven 5 күн бұрын
Excellent. Are they falling out once they reach the top, or right at the bottom of the gear that carries them up?
@mecrobofficial 5 күн бұрын
We are so glad to hear you liked it! Wishing you a Happy New Year! 🎉😊
@MartinsAssemblyHaven 5 күн бұрын
I love it, thank you so much 😀 And thank you, wishing you a Happy New Year too 🥂🍾
@biukucanoe 5 күн бұрын
got this for christmas hopefully this will help and it will work at the end
@MartinsAssemblyHaven 5 күн бұрын
Hey, that’s amazing, what a brilliant gift 😊 I hope you enjoy the build and it works amazing 😊
@theatrekid3567 6 күн бұрын
what if the box itself stopped working? like i took off the cello and the music box piece doesn't work until i manually move it?
@MartinsAssemblyHaven 6 күн бұрын
Hey, if you wind it up and it doesn’t work, even when on its own, you can request a new one by filling in ROKR/Robotime parts replacement form here: www.robotimeonline.com/en-gb/pages/part-replacement?_gl=1*sdhe25*_up*MQ..*_ga*ODc5MDI2MjE4LjE3MzU3NjA2MTY.*_ga_778Q153WGT*MTczNTc2MDYxNS4xLjAuMTczNTc2MDYxNS4wLjAuMTY3MTQyNzU3Nw.. 😊
@monteladow159 6 күн бұрын
Happy New Year Martin! Just a quick thank you for your video help in assemlbling the Rokr Marble Spaceport. Finished it yesterday and works PERFECTLY!! Next to add the Connector Kit and the new motor you suggested. Been great fun and truly appreciate you help! Monte in Washington State.
@MartinsAssemblyHaven 5 күн бұрын
@@monteladow159 Hey Monte, thank you so much and a Happy New Year to you too 🍾🥂🥳 And you are more than welcome, I’m delighted I can help out 😊 All the way from Washington State, that’s amazing 👌 I’m delighted you’re also enjoying the model, have you built the Night City already?
@monteladow159 5 күн бұрын
@MartinsAssemblyHaven Yes, the Night City was my first build at the encouragement of my adult sons. It was "challenging" but a great learning and patience building exercise. Sure made the SpacePort a lot easier... especially with your helpful videos!!
@MartinsAssemblyHaven 5 күн бұрын
That’s excellent, good on them for the encouragement, now you’re going to be part of a hobby that’s very addictive 😅 Night City is for sure much harder than Spaceport, but still a great model and again I’m glad I was able to help out 😊
@GameplayHero658 6 күн бұрын
What a lovely robot!
@MartinsAssemblyHaven 6 күн бұрын
It’s really is and thank you very much, absolutely love it 😊
@Harrizeb 6 күн бұрын
What a lovely gift from them. Im going to suggest this as a gift for a friend.
@MartinsAssemblyHaven 6 күн бұрын
Hey, I know right, so unexpected, I’m over the moon 😊 And that’s a brilliant idea, your friend would absolutely love it 👌
@AndreiP-h9x 6 күн бұрын
Hi Martin. This looks great, what a nice gift to receive. My friend has used arduino before and he enjoyed it, I’m going to have to look into it and see for myself. Thank you for another great video.
@MartinsAssemblyHaven 6 күн бұрын
Hey Andrei, it really is and thank you, I can’t quite believe how awesome this is 😀 Ahh that’s an excellent idea, it’s such an amazing hobby, you’d love it 😊
@AndreiP-h9x 6 күн бұрын
@ Thank you Martin
@MartinsAssemblyHaven 6 күн бұрын
How nice is this from Mecrob? 🤩 I hope you enjoyed the video and please leave a like and check out their awesome innovative models here: www.mecrobremake.com/?ref=MARTINSASSEMBLYHAVEN and have fun 👌
@MichaelKemp-j6w 6 күн бұрын
Martin, The little screws and screwdriver are attracted to each other and screw stays on end while you push it into the screwhole. makes it easy.
@MartinsAssemblyHaven 6 күн бұрын
Hey Michael, yeah that’s a very good point 😊 I since have a magnet attached to my screwdriver and that works a treat.