Пікірлер
@horaciodelgado5765 14 сағат бұрын
Did you add the shims to spartan locker
@Alimal7777 2 күн бұрын
I've lost count on how many times you said "transmission fluid" 😆 Great Video
@heathputnam9524 2 күн бұрын
It’s in the title🤷♂️ Thanks for watching!
@Alimal7777 2 күн бұрын
@ I know it was a joke lol but for sure
@Alimal7777 2 күн бұрын
@@heathputnam9524 also what kind of tool did you use to take off the drain plug?
@heathputnam9524 2 күн бұрын
Drain plug was just a socket and the snorkel plug which is inside the drain hole is an Allen wrench.
@Alimal7777 2 күн бұрын
@@heathputnam9524 gotcha, thanks again!
@allenmoore5211 4 күн бұрын
Watching this video shows how so many electrical problems show up and then gone in a few days. Here is coating that can be used for insulating some of these parts. 8690 Acrylic Conformal Coating on the Big A store. Thanks Heath for showing a detailed process. I will start by getting new windshield with new gaskets.
@heathputnam9524 3 күн бұрын
I didn’t know about the conformal coating! That would be perfect. Thanks for that great tip! I did my windshield three days after my fix. I really had no good videos or articles that I trusted to go by so I wanted to make sure the fix would work. The job wasn’t bad and solved all my electrical woes! Thanks for the comment and let me know how the project goes!
@kylebeach2316 6 күн бұрын
I have a 03 ford excursion and the cab lights stay on cause it thinks theirs a door still open when all the doors are closed. Is it possible that this module is the issue? It also has a starting issue where we have too bypass the igntion switch so any tips on that would also be very appreciated.
@heathputnam9524 5 күн бұрын
You may have a bad door ajar switch… I would check those first. If it acts up or different after a rain, this is probably the problem. You would have to give me a lot more info on the ignition problem for me to help you.
@kylebeach2316 5 күн бұрын
@@heathputnam9524 sounds about what I was thinking of as well for the ajar switch. But for the ignition after digging into it theirs a black and pink striped wire that fell out of the ignition and looks like it broke off from where it's supposed too be at. Is that wire for the security system? Cause the security light does blink when truck is running. May sound dumb but this is my first time doing something like this and don't want too mess it up more then it already is.
@ralphmitchell3435 6 күн бұрын
Shooting this video in the snow ! Thanks !
@heathputnam9524 6 күн бұрын
Backyard mechanics gotta do whats gotta be done! Thanks for watching!
@ralphmitchell3435 6 күн бұрын
@heathputnam9524 ironically I'm working on this same issue with my son's truck and it's snowing here.
@heathputnam9524 6 күн бұрын
Haha! Good luck!
@darrellgibson 7 күн бұрын
I've been having the random electrical issues for a year or more. I had seen other videos on this subject but this one is the best yet. I'm just now finding it as I was in the process of repairing mine. I do have one connector that was so badly corroded that it was only barely making contact. Upon removal it came apart. I'm cleaning it up good as you did and will attempt to repair it with soldier.
@heathputnam9524 7 күн бұрын
Oh wow! That is a bad one! This fixed all my electrical problems! Good luck and let me know how the soldering goes. Thanks for watching.
@darrellgibson 7 күн бұрын
@@heathputnam9524 yeah I'm sure this will fix mine too. I was sure before I started. I've tolerated it for way too long. I've been disconnecting my battery every night for many months until I got the time to do the fix. But I at least 3 or 4 connectors have been doing some low voltage arc welding for a while. 😂
@heathputnam9524 7 күн бұрын
You may want to keep your eye on my channel I am doing more excursion/super duty videos as I fix up my 2000 excursion for exploring the high desert of Arizona.
@andrewiederkehr8806 8 күн бұрын
Thanks for sharing this idea! I tried this out yesterday. I looked really cool! But my lamp globe cracked.... It was a cold night (maybe 10 F), but I brought the lamp globe straight from indoors to the lit stove, so I doubt it had enough time to pre-cool much. I'm guessing it was just too much heat at once. Do you think using a dampener for a lower flame at first would solve this? I'm a bit reluctant to risk another lamp globe. I'm considering trying a mason jar with the bottom cut off, but I've read they're not meant for oven use, so I'm guessing the it wouldn't be up to the thermal shock either.
@heathputnam9524 7 күн бұрын
I used the globe off an oil lamp and it worked fine.
@willhall7684 8 күн бұрын
It seems like it would pull air through the secondary holes from the beginning if they're closer to where the fire is and there's several inches of packed pellets or wood beneath the fire. This video is awesome!
@heathputnam9524 7 күн бұрын
In the very early stage it burns similar to a regular fire using air around the flame for the chemical reaction. Then once a little heat is formed it burns as the video shows. Thanks for the comment and for watching!
@blauer_Stuhl 9 күн бұрын
On the very last test you did, were you connected pin no. 2 and no. 4 i get a p2123 and a p2128. What should I do? Thank you in advance
@heathputnam9524 9 күн бұрын
Could be several things… from easiest to very bad. Accelerator pedal assembly, throttle position sensor, bad wiring or connector, engine control module. Are the O2 sensor wires under the car in good condition? If they are disconnected or damaged fix them first. That can cause the ECM to burn out. Watch the video again and do the checks as specified. Good luck!
@joegrinder2404 9 күн бұрын
The alternater comes free sighn me up
@heathputnam9524 9 күн бұрын
Thanks for the comment! 😄
@gotdragon 12 күн бұрын
See my handcannon stove videos kzbin.info-407fkkkWwY?si=p8A8C04nMsx0qyIM
@gotdragon 18 күн бұрын
See my handcannon stove videos kzbin.infoiglfbaMGcQE?si=L8l8VAcWYo1o8vpi
@scamp7441 19 күн бұрын
You're selling yourself short man. That is not an easy job!!! I'm not sure my fat fingers and ability to break small connectors are up for this one.
@heathputnam9524 19 күн бұрын
You can do it. The plastic is not brittle. If it is junk anyways, what do you have to lose. Thanks for watching!
@gotdragon 19 күн бұрын
See my handcannon stove video
@donwagner7395 19 күн бұрын
Super mechanics video!!
@heathputnam9524 19 күн бұрын
Thanks for watching!
@donwagner7395 19 күн бұрын
Most excellent video! Rebuilding the '98 Explorer enjoy expertise. P.S. hooked on your other channel
@heathputnam9524 19 күн бұрын
Great! I’m glad this helped a little! Thanks for watching!
@gotdragon 19 күн бұрын
See my handcannon stove video
@justinw1765 20 күн бұрын
Tip for people trying to drill stainless steel: Use newer cobalt drill bits with a pilot tip. Put the metals to be drilled in the freezer. Get a container and fill it with cold water and some ice. Submerge the stainless steel in the cold water. Go between slow and medium speed with pressure. Clear initial shavings away by shaking it in the water, then continue drilling. I was having definite issues before using the above. Doing the above combo made it almost easy. An automatic center punch can also help.
@heathputnam9524 19 күн бұрын
Thanks for the drilling trick! Hope it helps other people!
@justinw1765 19 күн бұрын
@@heathputnam9524 You're welcome. Me too. Cheers
@justinw1765 20 күн бұрын
If you used pure quartz glass, it would let significantly more of the radiant heat flow through the glass. I'm building something similar, but with 95% road diesel+5% naphtha fuel in mind. I repurposed a stainless steel tumbler for it.
@heathputnam9524 19 күн бұрын
Thanks for the info. Hope your project goes well! Let me know!
@justinw1765 19 күн бұрын
@@heathputnam9524 Thank you. It's hard to find quartz glass of the right size (I would have to buy a patio heater replacement tube and cut it down), so I've decided to use a borosilicate lantern globe for when it is in lantern mode, and use a food can for when it will be in heater mode. But I have a secret sauce to up the efficiency of the heater mode. I have some platinum coated rock wool fibers that I'm going to encase in some stainless steel mesh. That will go up at the top of the food can. Put the flame out, and let it run on fumes. At least, that's the idea.
@-JoinMyAdventures 18 күн бұрын
@@justinw1765sound like an interesting idea. Keep me in the loop!
@muchfuninc 22 күн бұрын
Great video
@heathputnam9524 19 күн бұрын
Thanks for watching!
@AzTurboMini 26 күн бұрын
Great job and thanks for your video. ✌️
@heathputnam9524 26 күн бұрын
Thanks for watching!
@patrickreynolds801 26 күн бұрын
Great vodeo
@heathputnam9524 24 күн бұрын
Thanks for watching!
@stephenpetrovich2383 29 күн бұрын
The T25 screw is a stupid idea....I broke 2 bits, ans still cannot get them out....I don't know what to do....why...why would they be so tight...I'm screwed now cause the bit broke inside the head....can't even drill it out...
@heathputnam9524 28 күн бұрын
Relax…
@heathputnam9524 28 күн бұрын
Take a pointed steel punch and make a dimple about halfway or a little more from the center of the bolt once you’ve got that dimple driven deep enough, just tip your punch at an angle and hit it with a hammer to knock it counterclockwise it will come out trust me
@RojNation-m8l Ай бұрын
Thank you for the help sir! 👍🏾
@heathputnam9524 24 күн бұрын
Glad it helped you! Thanks for watching!
@dripperformanceandlighting5459 Ай бұрын
I was told you have to remove the pinion to remove the crush sleeve, yet i just watched you slide yours out haha am i aboe to do that on a 2005 mustang gt?
@heathputnam9524 24 күн бұрын
Haha! Don’t believe everything they tell you! Have fun and thanks for watching!
@mpybals8002 Ай бұрын
Best video of all time for this subject I’m about to tackle this project myself and I hope I can live up to your standards.
@heathputnam9524 Ай бұрын
Thanks for watching and good luck!
@heathputnam9524 Ай бұрын
Keep your eyes out for more videos on this vehicle. Hopefully the next videos will live up to the bar you just set! Haha!
@rubenssilveira1766 26 күн бұрын
Boa noite, temos um caminhão Ford 12000.e gostaria de saber se o sistema do limpador de parabrisa passa por esse módulo gem
@heathputnam9524 26 күн бұрын
@@rubenssilveira1766 It does go through the GEM and fuse box.
@heathputnam9524 19 күн бұрын
How did the project go?
@tiago8412 Ай бұрын
You’re just amazing mate. Is it naive to think that this design used in burning oil or diesel would potentially achieve blue flame? Your reply would be greatly appreciated as I can’t seem to find any information online.
@heathputnam9524 Ай бұрын
I believe you would get very good airflow and hence possibly blue flame. You will need to bring the oil in through the side so the pyrolysis zone is not broken. Let me know your results if you try it!
@tiago8412 Ай бұрын
@ would you say that airflow is more important than temperature? As in, should the diesel be added at the bottom of the can as liquid or go through some form of heating and vaporised at the pyrolysis zone?
@hambalizakaria7407 Ай бұрын
Tq
@heathputnam9524 19 күн бұрын
Thanks for watching!
@peterpissott9849 Ай бұрын
Help have 04saab 93 fan is stuck on high with car on or off have to pull fuse to shut it off installed new resistor same thing was thinking of a toggler switch any thoughts would be appreciated
@heathputnam9524 19 күн бұрын
Sounds like the wiper switch to me, or the relay.
@bettebette9881 Ай бұрын
From last video: 1:34 flame concentrator ixnay 3/16 to 1/4 inch on secondary holes pot stand not helping new one taller added 16 holes 5/15 around bottom all vortex tweak same direction as top 8 4:33 22:00 mins of burn time with 1 c pellets 5:53 new inner can honorary holes on outside --- This vid: Protestant integral part of design
@heathputnam9524 24 күн бұрын
Thanks for watching!
@bettebette9881 Ай бұрын
1:34 flame concentrator ixnay 3/16 to 1/4 inch on secondary holes pot stand not helping new one taller added 16 holes 5/15 around bottom all vortex tweak same direction as top 8 4:33 22:00 mins of burn time with 1 c pellets 5:53 new inner can honorary holes on outside
@misterbulger Ай бұрын
My truck stays running if i take the key out and it also gets stuck in park! Also throws ABS codes and the transmission slips and wont downshift. Then after it snowed my wipers quit working. I noticed the GEM fuse was melty looking so I replaced it and it fixed the issue but then it got hot and went back to hanging up in park again. Oddly enough somebody tried to steal my truck last night but they couldn't because it was stuck in park! Kind of thankful for this issue in a weird way. But they did break my lock out and destroyed my key cylinder.
@heathputnam9524 Ай бұрын
That suck man! My ignition cylinder is busted so the truck will keep running if you pull the keys out. Dang Fords! Gotta love em!
@misterbulger Ай бұрын
@heathputnam9524 idk why I keep buying Fords lmao
@Tomorer Ай бұрын
Pretty cool! Get a metal detector up there and check for buried treasure the Spanish missed ;)
@GERRYJADE1 Ай бұрын
Hi there, when I test Pin 2 and 3, I only get 3.2V. The 3 previous test all had 4.96V. Where should I go from here?
@f.w.309 Ай бұрын
By the pine trees a grinding stone still exists. and behind those brush is a somewhat natural wall to sit and get out of the wind , . the grinding stone is full of dirt and some rocks.
@boost7983 Ай бұрын
Thanks, I have a cracked primer bulb - looks basic as can be, thanks for the video!
@ronaldmaranto368 2 ай бұрын
What is the name of the hose you need to replace
@rene64023 2 ай бұрын
Can someone tell me how many kilocalories a stove of that size produces, thanks
@James-ee4lw 2 ай бұрын
Mine idles at 3000 and stays there. Til i stop then drops to ,2000. Needed a lesson on vacuum lines.. video was quite helpful. University of you tube is awesome
@FelipeMorales-et6hy 2 ай бұрын
hey man! this is the first time I listen about this topic but it's quite interesting, in fact I Love it, I'm also familiar with the pyrolysis phenomenon so it let me get in the matter easily. so there is a lot to understand in terms of fluid dynamics and indeed this may be the key factor of this working process. In this era of consumption and need for fuels to impulse our own industries and business this subject become fundamental so we need more investigation and deep learning about this. please don't stop to learn and keep experimenting and creating. by my part I'll gonna learn more about and do my own research. if at a any moment I got satisfactory results I let you know. thanks for sharing.
@cody481 2 ай бұрын
Beautiful. Thank you.
@MikeTrieu 2 ай бұрын
Pyrolysis paralysis 😂
@inmyopinion6836 2 ай бұрын
Even with 16 THOUSAND holes, if you restrict the air flow WITH the pellets, you are restricted still! Only at the end will you reap the benefits. Reduce the pellet flow into the hopper-stove and test again. A small feeder tube onto a screen at a 45-degree angle will (with fidgeting) show massive improvements.
@narendraraju8756 2 ай бұрын
Hi there I’m doing this now, I have a 2012 Passat 2.5 se, I changed the transmission filter and gasket, and kept 5quarts oil and started engine and when it reached the temperature required I opened the hose of pipe but I lost too much oil I was using a temp gun, please help me, I just measured the jack stand height, front it’s 1/2 inch less
@ralph95 2 ай бұрын
ALWAYS be sure you can remove fill plug before removing gear cover !!
@ButterCup-f4n 2 ай бұрын
Precise and concise video straight to the point. THANKS 👍
@kenibnanak5554 2 ай бұрын
At 1:30 the image disintegrates while you deal with the fan disconnector. Do you mean when you say 'the disconnector slides to the right,' the driver's right, or the right of someone facing the car?
@Firekid144 2 ай бұрын
I spent a fortune trying to fix this problem. First I changed the catalytic converter, then I changed the spark plugs and cleaned the injectors... nothing. Let's see if this solves the problem. Thanks for posting
@heathputnam9524 2 ай бұрын
Hope it does! Thanks for watching!
@SemiEvolvedNeaderthal 3 ай бұрын
Cut you air hole before removing plastic bucket
@chucksstuff9331 3 ай бұрын
Restart this series, Heath!