YOU HAVENT POSTED IN A WHILE, BUT YOU STILL GOT THIS BUILT TUNDRA? THIS MFER IS A UNIT. DO YOU HAVE THE UPGRADED INJECTORS? I CANT FIND ANY GOOD DYNO INFO ABOUT THEM BUT IM VERY CURIOUS, AND I BET YOUR BUILD WOULD RIP WITH BIGGER INJECTORS. WOULD BE THE BADDEST TUNDRA ON YT MAYBE. ID WATCH.

How would you rate the face ace front end after all this time has passed?

I wanna find a way to smoothen out the shifting from 2nd to 3rd when pulling hard cuz it really kills the pull

What year is your first gen? Because I know when I had my 05 stalk it came with 281. But I always wanted to give it some more balls.

Is that a sick beamed ranger in the background!?

Where did you get that front light bar setup?

Damn, I wish I had Zirk fittings on my total chaos, upper control arms

I have a 2006 Toyota tundra 4.7 L with 318,000 miles on it. I haven’t changed the transmission fluid in 200,000 miles. Should I do the 4 quart drain and fill? Can anybody help me with that or should I leave it alone

How much were the OEM ball joints?

This is exactly what I want to do with mine except I’ll have a flatbed and I’ll get rid of the bad oem lbjs

he still has his teeth.lucky bastsrd

is their anything to do to get the back wider...? wanting to do this to my truck i have a 06 im thinking of building it or selling it and getting something newer 205k miles 2wd newer motor tho because wife blew the radiator then motor so i bought a new one at its only at like 100k now oh and aluminum radiator

front number plate and fender from a newer klx? any modifications?

Those Mountains got blown up

What’s the spec on those tire?

Awesome video. Beautiful truck. I need a 1st gen Tundra. Sub'd.

Truck looks healthy.

Can u gear one of these to hit 150

Okay I have to point out a couple of things. First of all when you install wheel spacers you actually have to check and retorque them after the first 50 miles and then again at around 500-1000 miles and then of course check them at every tire rotation. I recommend marking them with a paint pen so that you can easily see if they have moved or not between checks. Second of all, having just installed and UNINSTALLED wheel spacers on my 2005 tundra, you can actually see in the video if you pay close attention that the front wheels spacers lug nuts are only threaded on about half way. That is because for some reason on our trucks and probably many others, there are less threads available from the wheel hub assembly's studs than there are in the back. I installed my spacers and drove around a few days just fine but I ended up removing my spacers because I did not like the idea of only having half of the threads engaged on the lug nuts from the spacers. I've ordered 1/2" longer studs for my wheels and once they arrive I'll be banging out the old ones and pressing in the new ones and re-installing the wheel spacers. And finally, use red loctite not blue loctice. Heat easily defeats the blue loctite, red will withstand more and will have a better chance of keeping your wheels on for you.

New subscribers from the UK 🇬🇧 Quality channel Dude 👏

My KLX 110 '21 lower bearing race doesn't expose the lip enough to hit from the top. This must have changed over the model years :( I just ordered a park tool headset removal tool. Anyone else run into this?

Do you still prefer the irc front tire compared to mx33/34?

Doesn't seem any faster then normal.

I just passed this are in the 60! Epic jump!!!

This video is 5 years old and still looks better then half the 1st Gena here on KZbin

Absolutely gnarly

Imagine driving and seeing a dirt bike flying across the road

Have you been able to service these forks? I’ve looked everywhere and all the service parts or bushings kits are out of stock. How are these forks holding up?

I finally found this! I saw you hit this jump

Got gnarly in the end

Damn that was a great sound!

Where’d you get the down pipes

6yr old kids are doing 120 foot double jumps, I don't respect this video.

not really like a pro, colby raha whips his tail.

do they fit the kx65?

You a dam lie

That thing hauls ass

In the slim chance anyone comes across this vid looking for jetting info his jet numbers are way off. I’m sure he was just confused but the main jet is an 85 NOT a 185 and the slow/idle jet is likely a 40 maybe a 42 definitely NOT a 22.5. They run a 38 stock and could use a 40 stock honestly.

How about an official 1/4 mile time?

What jets are you running?

Does anyone know where can I find the mount on the bumper for the lights ?

The freeway has been reconfigured thru there... Never will happen again! ULTIMATE EPIC stunt Evel Knievel would be proud of!!! Mucho huevos!!!

i just got a 110L n i ride like crazy on a 50 with an 88 should i bring it to a track lol

Where is this at? Where are you located? I need to come and sweep this whole series

Sounds like the apakolypse is hear. That engine's a Monster

What bumper is that? I have ole chrome bumper

I'd finish watching, but can't stand the music

Hey my friend,I'm sure you've been asked the same questions about your truck over snd over so I apologize... But I'm about to buy some 34" tires (285/75/17). I have bilstein 5100s top perch, camburg uniball UCAs, installing Solo Motorsports LCAs that place the lower ball joint 1" forward for bigger fitment. Since you fit 35s back when your truck was this way, I'm wondering if I'll be able to fit these 34" (34.1 is the exact diameter measurement) on my set up without spacers. I'm open to trimming. Am I hoping for something that can't happen? Any tips will help, thanks bro!

Have you been off road ever?

What’s the lift setup???