KLX110 Full Mod Build | Parts Review | Part 10

Here is the 10th part to my klx110 full mod build series. In this video I review the parts that I installed on the bike, and talk about how they held up under riding conditions. Feel free to ask questions in the comments!

[@berube361]

I'm in the process of a 2003 Suzuki drz 110 build. Nothing crazy like this bike but doing enough to make it safe for my 190lb self haha. Had a sdg tall seat, pro taper bars and a billet gas cap when I got it. Have since installed stiffer fork and rear shock springs, cradle mount from tbolt usa, wide pegs, new tires and tubes, black/yellow spoke skins, new brake lever, new graphics kit, new chain. Stock motor for now and will probably stay stock. Have a pro circuit t4 exhaust and uni air filter on the way, have new 85 main and 40 pilot jets ready to go in and will shim the needle and tune as needed. I'm into it for $1200 total which isnt too bad. Would love to do more but not worth dumping anymore into it. Can't wait to hit some local tracks/trails with buddies who also have pitbikes. These things rock and nice build man!

[@NickKerr-e7v]

i’ve got a postie exhaust on mine and it goes hard 👌🏼

[@Glueby]

This bike looks amazing man!! Well done mate. Well done!

[@mikefrench316]

Thanks man I really appreciate it! ✌👊

[@thezombieking52]

I NEED A LIST OF ALL THE PART YOU USED. NO MERCY GIVE THEM ALL PLZ IM THINKING OF BUILDING A KLX AND NEED TO KNOW ALL THE PARTS (sorry for the caps)

[@shanegonzales9353]

I getting that tire asap! I just got done doing 143 big bore and it rips now, im super happy with the fastace front kit well worth the money!!!!!!!!!!!!

[@mikefrench316]

Nice! Yeah that IRC Tire makes the bike ride wayyyyy better 👌🤘🤘

[@johnhein1960]

Mike French what make and model tire is it ? And size also I just got fastace forks and want to run the widest tire I can !

[@Echocompany2-7]

Honestly everyone takes for granted putting the better suspension on a 110 for racing Because I did just power mods and I’m making anywhere between 18 to 20 horsepower and it’s a handful in a straight line And almost impossible to track I need to get my handling set right

[@rolandwhite8153]

That's a nice build man. Looking to sell my built crf50/88 and get a klx i think. Great video quick and to the point. Lots of reviews in a short time. Thanks

[@zackshearer4924]

Rear disc break conversion kit please!!

[@mikeg_8978]

Bikes dope I got a 03 klx 110 rides Decent dependable

[@JerBear_1989]

Hey Mike we need a complete part list an where to buy everything at. Also recommend part so pretty much options.

[@StoneStraiff]

Beautiful

[@maxmartens295]

We need to see some riding videos

[@mikefrench316]

Yeah I'll have some rad riding videos uploaded within the next couple of weeks 👌👊

[@danielborg6297]

Your pit bike build videos are sick I'm doing my KLX 110 l up too check out mine

[@lngtrvl8447]

Is that a sick beamed ranger in the background!?

[@benstinnett6089]

Earlier I didn't wreck I would call that a Wipe-out... lol 😂

[@Cummins2]

Is that a rear tire you use for the front or is it made as a front tire?

[@Cummins2]

And what size tire do you run on the rear?

[@clutchitup8565]

badass bike

[@oliver_crosby]

Yo what is the make of the hydraulic clutch????

[@thelongranger55]

I don’t care I like the China bikes for now , they fit my budget

[@tylerjames3526]

Heck yeah

[@mikefrench316]

🤘🤘👊

[@lockybroo]

nice bike. can u increase the height with longer travel suspension front and rear? or by droping the forks and putting in a swinger spacer. or by running bigger rims? whats the biggest rims set up u can run on these bikes?

[@motogpstar169]

Killer build!! What is your impression of the 143 big bore and stock 3 speed transmission if that is what you are running? Would you recommend it or is the 4 speed shift drum necessary?

[@brandonlee1547]

motogpstar169 hey man, I know it was a while ago but my brother has the 143 kit, vm26 carb, and is still 3 speed. It hauls ass, and honestly 3rd gear is tall enough for us. We’ll probably go with the 4th gear drum later but it’s plenty fast top speed wise. It feels good.

[@blkfukus_RS]

front number plate and fender from a newer klx? any modifications?

[@Kroviakjm]

Do you still prefer the irc front tire compared to mx33/34?

[@nickpeccarelli7593]

1:22 HOLY BENT RIM!

[@Allavalle5656]

You should get a pre filter

[@lincolncooper6594]

I got same pipe it’s indestructible

[@fromtoxtosaiyan7814]

Nice build !! Possible liste of all parts and lenght fork ? Thx have good day bro ;)

[@Kroviakjm]

Have you been able to service these forks? I’ve looked everywhere and all the service parts or bushings kits are out of stock. How are these forks holding up?

[@logustagears4917]

Whats the bar clamp link? Does it only work with the forks and triple clamp set up?

[@TheHCR202]

I need a full details parts list. I’m about to build a replica bike of this plus graphics etc.

[@mfoauto]

have you ridden the piranha 190? I just got one, and for $2800 it’s a hell of bike which basically needs nothing. Wonder how it would compare to your built klx

[@jsseasideelectrical2289]

Cool video , by chance could you tell me where you got the front sprocket chain Guard

[@Owen322]

What brand hydraulic clutch do you have on it I want one for my 110l

[@thomasrenfrow609]

So Fox is stopping production of mini bike shocks. I'd try the Elka if I were you. I have the Fox Float and it could be better

[@lucianobenitez3756]

what year are your bike? any can tell me if the klx 110 2010 have upgrades than 2020?

[@Abyss955]

Can you tell me which sprocket you are using?

[@jonathanhinote]

What’s the difference upgrading to the bbr swimgarm

[@mikecal516]

Hey, where did you get those add on on the motor in blue? I've been looking all over and can't find anything. I wanna do that to my klx

[@Tracergetrackzz]

Do you need to rejet your carb after putting in new pipe

[@mikefrench316]

Yeah you will need to change both the pilot & main jet. The aftermarket exhaust will make the stock jetting run too lean, so you will need some larger sized jets. There are forms online to give you an idea of what jet #'s to use 👌

[@Tracergetrackzz]

@@mikefrench316 aight man thx

[@gunnercampbell5374]

The rear wheel looks a little uhhh a little bent

[@Sirpotatoguy]

What length is the shock on that bike? In a previous video I thought you said it was 270mm but I cant find anything like that matching the shock you have. The only 270mm shock they make does not have the piggy back reservoir. Fast ace has a 260 and 280 shock that looks just like yours. The 260 has the same BDA-51AR code on the side of the shock as yours. The 280 shock is 550lb and the 260 is 250lb. Im pulling together a pitbike build and i'm going for a suspension setup very similar to yours, so any help would be great!

[@Burrows91]

Can u post a parts list

[@kylehaley9058]

what year is it

[@danielborg6297]

My KLX 110 l is fully modded as well

[@248studio]

where did u purchase the front fork from can u give me the link pls.

[@Jackp602]

does jti plate kick the foot pegs down/back at all. looking to mod mine for a taller rider

[@code_-kl5fu]

What kind of plastics are you running?

[@johnhein1960]

How did you get that front fender on the right way ? I have a ‘18 klx 110l and I can’t seem to get all 4 bolts to line up only 2 of them

[@landonlaplante6348]

Where did u get the bars from

[@kylemordan1059]

What is the case saver?

[@maxmartens295]

All I can say is I wish I had your bike

[@mikefrench316]

👌🤘

[@Starthemachine-n9p]

Any way you can post some links for this stuff?

[@AngelCampuzanoMX26]

What chain is that

[@skullcam]

can i have that motor for my old 90cc china quad...please

[@keatonenright6500]

whats the new seat height

[@hellsbells3084]

Mike, my son {11} has an 02 klx wants to know where do you orders parts fun?

[@mikefrench316]

Tbolt USA mainly 👌

[@hellsbells3084]

Thanks

[@mikefrench316]

Yeah and also checkout Factoryminibikes.com They have tons of products and great prices ✌👌

[@mikeg_8978]

The Kawasaki website u can find anythinf

[@grymsa]

What motor u have

[@Davyboi1690]

What engine is that I am confused looks like a 160 but idk

[@AustinBeaty726]

Where did you order that tire from? I can’t find the front anywhere?

[@mikefrench316]

It's a IRC 3.90 front tire, I purchased it online

[@AustinBeaty726]

Mike French still struggling. I’m on irc website and still not seeing the 3.90

[@mikefrench316]

My bad dude, it's a 3.60/100-14 it's sold on Denniskirk.com

[@TBoltUSA]

Looks like this one: tboltusa.com/store/irc-tire-gs45z-360-14in-it-front-tire-p-5335.html

[@coreyshredgnar131]

What is the length of your rear shock

[@mikefrench316]

270mm

[@Grantpa33]

Where can I find this tire??

[@TheRebelyellers]

In the slim chance anyone comes across this vid looking for jetting info his jet numbers are way off. I’m sure he was just confused but the main jet is an 85 NOT a 185 and the slow/idle jet is likely a 40 maybe a 42 definitely NOT a 22.5. They run a 38 stock and could use a 40 stock honestly.

[@tirolyoungriders76]

whats the exact name of the tire can you send me a link

[@jessesegura8983]

I haven’t seen the video yet but how did you get the back rim so bent

[@mikefrench316]

Jumping up a small curb a few times 😥

[@krisskotoris5525]

Where did you get the newer style front plastics from

[@mikefrench316]

I just ordered the newer style klx110 plastics online. Had to drill two new holes in the front fender to make it fit.

[@kadegeddes4879]

Tmog vs Mfrench

[@mikefrench316]

Haha that's what everybody is saying 😅👌🤘

[@BranCrackah239]

Ahhhhh....I think your rear wheel is a little "off" :/

[@michaelhicks1170]

Ride 25 psi in the wheels

[@ItzCam436]

1st comment

[@liloudeluzet6779]

Les roue son large pour un 110

[@romankozhokar8244]

Klx110????

[@MegaDirtyberty]

So really it was just a parts swapping exercise ie no custom fab, at the end of the day it is still only a pit bike.

[@westcoastfrisco]

MegaDirtyberty what a dumbass comment

[@jadenhaltunen5870]

Aaaaaa 3rd

[@monolithknives]

Nice crunched rim dog! $2,800 and no disc brakes, fail!

[@tracyyelvington]

All i wanted to see was your brake lever and you never showed it

[@Chase_01]

Wayyy over the weight limit

[@dirtbike4life178]

2

[@therealakalaska9485]

lol omg that poor rim

[@tannerbourgeois345]

therealAK ALASKA right lmao

[@thezombieking52]

that rim looks bad

[@TheJrw397]

Pro wheel is junk

[@mikefrench316]

Yeah that's what I'm thinking now 😥

[@TheJrw397]

Mike French bike looks sick though

[@mikefrench316]

Thanks dude! 👌🤘👊

[@TheJrw397]

And congrats on your guys 2nd place finish at the SF 250

[@mikefrench316]

Thanks dude! 🤘🤘👊

[@DERELICTMARINE]

What jets are you running?

[@Dirtyjerzzzyy]

What’s the front tires

[@stefanomaniscalco9547]

What cdi u running what's name