Do you have three d printed mounting system for your huben ? My iron sights are slightly off. Can't figure out how to adjust them and was going to get a dub. Tail to pick rail mount for a red dot but the dove tail on that huben is kind of far up. Don't know if that would be usable.Or not. My phone's auto spell is illiterate

Yeah. Close

253 is what fits,and works good

It's an insta 360x3.. You can. Just set it in one place and afterwards go back and direct were it goes. So there's no one behind it if that's what you're thinking

It was right next to me

Did the same with mine. Doesn't rub. Doesn't bottom out to fender.

I don't have A crony but I want to get one. I believe(think) twenty five grains around1000- 1100fps. I imagine 30 grain is slightly slower but a little more energy.

@corywebb5537 nice ! Yeah they sounded almost supersonic. Loud pistol when it's turned up and no moderator

I think with pcp's, around 900fps is ideal for most. Definitely borderline supersonic

@@corywebb5537 👌💯

​@@ImpactpsiJust ordered a crony

There's a delay. In the throttle that really throws me off.

@ could make a nice hunting bike if it’ll climb hills good.

​@aeestep77 It has plenty of power to climb .delay.Throws me off a little though

Yeah, I believe I would get ahold of the person.I got it from and send it back so they can fix it or give you a new one.That works properly.I understand your frustration, I've only heard one other person.Complain about the same issue you are talking about. If you can't fill it all the way up then you're not getting the few really good powerful shots in the beginning

​​@@corywebb5537 I've heard this from a lot of ppl. Toxicmatrix has the same problem where if u fill it to 4500 the actual screw holding the bolt onto the gun once removed clears the issue and even so much as just barely threading it on makes the gun duck up

Rail?

I had thought about that , but I was worried it hung down too low and the compression would make it hit the fender

@corywebb5537 no issues doing it thos way and the light adjust perfectly also

Has 2 60volt =35ah

yea I noticed it wasn't right instantly and I was losing my mind trying to figure out why it wasn't working out correctly. Thought I had missing something but eventually realized I should just add another spacer lol.

😂😂I was spaulding on halloween 😂

@corywebb5537 Like to see what you do with it. Have the 24 plus freedom. Opted to remove rear rack and battery

I didn't care for the taste very much😂. The texture was kind of strange reminded Of crab meat.😂. The oyster mushrooms and chanterelle taste the best

Juicy like pulp

I did change the Spring, but there are so many manufacturers.A number probably wouldn't help. What I did is take the spring out and take it to the hardware store With me, Found some that was the exact same size, Went through them and squeeze each 12 see which one Felt softer. Bought 3 different ones. Used the softest

I've also heard the terminador one's actually work better on this model , so you dont have to change a spring

Yeah. But the only way I can think of showing you is to upload a little short with it. If you would like

I wouldn't let that slide. Hold them accountable.

I had little disassemble labels on the back rack.They have an extra link agenda.For some reason, you take those linkages out and connect the rack straight to the frame.And then you can get the screw in there for the finder to reach.

@@corywebb5537 Same here, my bike just arrived and knowing of the problem described here, I attempted to find a fix before taking it out. I didn't see any other use for that link, so I used one as a spacer and was still able to use the same screw included for the headlight.

​@@vmitch5033Whatever works😂. I almost did the same thing.I was just a little worried about it protuting downwards , but, I found a little nut that worked good enough

Sorry to report that my makeshift solution did not work. The setup caused my beam to reflect higher than desired. Unable to adjust it to a desired level.

​@@vmitch5033Yeah, there's only one way to do it.You have to find a little nut.Or something to use as an extra spacer like I did

No damage in shipping.The shipping was great came all by itself in the back of a big truck on a pallet wrapped in plastic and used A little electric fork lift to bring it out😂. The headlight mount comes with a little spacer you put in between it, And the bike. Well that spacer isn't big enough, So you have to Use something, To space it out, Twice as much, Otherwise when you turn left and right, It can cut a groove in The frame, I just used a little nut for the extra spacer. I wish it had a little extra backfinder.To cover the motor controller box.Cause all the mud and debris flings on it. But long is it sealed good, Shooting calls a problem but still would be nice. Other than those 2 little things.Nothing at all I really have To complain about. When you get into some clay or mud. The fenders are a little close To the tires, But it's not a big deal, So defenders could have better covered. But it's an awesome ebike. Very powerful. But tameable

@corywebb5537 Does it come locked in 2? If so can you unlock it and change the speed or percentage of both the front and rear motors?

​@@luigiprovencheryes

​@@luigiprovencherI changed the power start up to 3. Speed limit up, And one of the settings it asks if you want to change classes , but you actually have to click on the no instead of yes for some reason

@@corywebb5537 Yeah but is that for the front or rear or both? Can you do each motor independently?

44.1

That's why I like the park.Besides people playing baseball a few months out of the year it's empty

@@corywebb5537 yea it really is

Yeah you have to add something as an extra spacer

@@chopdog1972 flip the light linkage also .did this on mine works great

@chopdog1972 flip the linkage on the light also. I mounted my upside-down and flipped the linkage at the 2 joints on the light. No clearance issue and the light adjusted fine for night.

Yeah, I think there are a few spots.I'm going to add a little more waterproofing.Or touches too.What I do that with most scooters. But its sealed up pretty good.

😂 I don't think it'll reach.I don't weight a whole lot

Yeah, I just had a little nut.I used along with the spacer that made it bigger.Almost need a longer bolt but it will work

@gregb878 flip it upside-down and do away with the spacer . Flip the linkage on the light as well works great. No clearance problems and light adjust no problem as well

@@mrjonesbones1 I added a little longer bolt but flipping it upside down is probably better. Thanks for the tip I will change ours this week!

No, they confirmed.I had it in the right spot. I think since I called it fairly quick.It should be alright but could have been worse

@@corywebb5537 Okay, thanks for sharing the info.

@vmitch5033 i flipped mine upside-down did away with the spacer. Flipped the 2 linkages at the light aswell. Works great. No issues with clearance or light adjustments

You are. Correct! Along with the fact that nami burn e max came out, The new wolf king and others , so the blue tran, Faded into the mist or background in the u.S while people in france, Still rode it and made upgrades. I've had no issues. I have a wired predator ebike now and it's ridiculous , even though it's sixty volts. If the motor controllers are higher amps , so I think it takes off even Faster than the lightning