Thank you! I have issues with my power struts on an Audi Q8 and your video really helped! :)

I definitely put a flashlight up under my wheels after watching this video lmao

My OCD is kicking in you not preloading before torquing all control arms and such.

Great video! Question though, is this scanner the Nextgen basic one, or the Nextgen Pro version? Additionally, did you need to buy a plan for this or is it the no-plan required version? Thanks!

Thanks! Can you share the spec sheet shown at 3:20 in your video? Is that from a Toyota service manual?

I know this is an older video but unless the the engine has forged rods and pistons it won't last long.

Dang, might have to do that to mine. Looks great. Definitely worth the $

Excellent install! I appreciate your finesse and caring enough to not scratch the paint with microfibers!

light hood no sense to have gas shocks on it, too heavy for you? can definitely tell it's not factory. looks terrible

Drop your "Dealer Quote for Repair" HERE 👇🏼

Now my question is, would they still allow me to use the heated seats feature

For not being a mechanic it looks like you probably should be. More than I want to take on. Any suspension shops in SoCal you can recommend. Thanks RS

Just destroyed my cf front lip on a ice block a few days ago

worth a shot! I tried changing the sensor for P0177 + P0178 "pending" faults, but it wasn't it for me.

I got these for my Corolla sedan but I couldn't get the damn hood bolts off no matter how hard I try 😭😭

Pro tip, spray the underside of the lip(not visible) with a rhino liner. Prevents cracking, shatters from small debris and helps stiffen and reinforce the brittle material

How much horsepower did it give you?

I had a 2018 TTRS previously. The 2018 is still one of my favorite cars I ever owned, but these are the 5 things I hated about the TTRS in MY EXPERIENCE: -The stock transmission is the worst lag I've ever experienced especially in low speeds. The constant bucking of the DSG get's very exhausting after while (although a tune solves that) -Suspension is super stiff, which is to be expected with the type of car it is. But it comes with the sacrifice of an uncomfortable daily if driving for longer periods of time. -Parts and maintenance are costly, you need deep pockets to own this car. -I always hated the side profile of the car. 🤣 -As a tall guy (6'2"), getting in and out of the car fucked my knees and the head room was low which ultimately is the reason why I had to move on from the car. PROS: Literally EVERYTHING ELSE about the car that I did not mention above. It's superior to any other car in it's price range and literally FEELS like a super car for around $50k. Would i buy another in the future? 100% YES. But as a secondary, not as my primary.

Great video, what is the rear diffuser you have?

nah fam this like throwing the wolverines claws on the headlights

Thanks. How much you paid? I am thinking to trade mine so wondering?

You are a good man! Would these ship to Australia? I took my car to the dealership and they are trying to charge me 2.5k for it. Thanks for your video and now I decided to do it for myself.

After extensive experience on the EA888 engine! 3rd gen on Audi, Porsche and VW. I have learned that that Engine likes 5W-30, oil changes at 3k, fully synthetic of course! Please the oil additives are less that 1/2 life with a turbo engine and timing chain, specially the viscosity additives that’s why ow oil is not a good idea! Please save your engine from excessive wear! Also warm that engine and turbo before driving at a minimum oil temperature of 100F. Change the timing chain at 4degress deviation..plus 4, or minus 4! If you do that at a minimum that’s a 250k miles engine

Great video! I'm going through this same issue right now. Question - in hindsight, could you have left the mounting brackets on the vehicle and just popped off the strut clips??

Note to self to not run the Sayber design one too 😭 mine got cracked from a ice block on the road 😭

I have had the same lip on mine since Sept. I havnt had any issues and we have been dealing with the same weather since your only 45min away. I feel like driving a lowered car in pittsburgh isnt a good idea summer/winter due to how poor every road is around here. If you had another one that was stronger and you hit that iceball it could have ripped off the whole lower part of the bumper. I would rather the cheap lip crack off and my front bumper is fine to replace it with something else.

Sorry 😞

Can you gimme a link to the rubber grommets you used for the cross bar? I cant find them for the life of me.

I have the Extreme Online front splitter in gloss black. Looks great, great quality and easy install. Look into that one!

❤

I really enjoy watching your modification explanations, which allow fellow GR COROLLA enthusiasts to clearly enjoy the opportunity to DIY. I also hope that in the future, you will share a tutorial on how to modify the rear lights into sequential lights. Thank you, and I look forward to seeing more of your content!

Nicely done my man! Keep at it. You are an expert tutorialist.

So what is the cost of those credits?

Do you know what channel/slot type these cross bars use? They look sick!

Nice install video 👍

If I felt more comfortable working on VW/Audis I’d get a used GTI and build a race car. All those turbos need is a tune, some bolt ons and you’re pushing numbers a GRC would only see after thousands of dollars in engine and cooling upgrades.

What exhaust is that ?

Just got these on my mk7.5 gti today and they definitely made a difference with the snow we just got here in Michigan lol

How to remove the rotor: -just remove it Ok thank you and why was this recommended to me lol

You need to buy fiberglass lip kit it’s stronger

The lip needs to be metal and bolted to the frame to be realistic. kzbin.info/www/bejne/sKTVZpmVrM2enck He talks about the mistake you made

This is a wonderful video. So helpful!

Hks just released a lip 👀👀👀👀

Get what u pay for. I got the EOS lip and I ran straight into a curb while parking. It’s still in one piece..but totally shattered the sides. Nothing some epoxy couldn’t fix tho.

Plastic gets very brittle in freezing weather

You mentioned about the volume button on the right hand side on the steering wheel and on the console. However, in good old London England where our steering wheel is on the other side of the car you have your volume control on the steering wheel on the right hand side and the centre console is on the left of you so you just need to come over to England Jolie, England.

Great video!!!!!!!

That is mental!

Is this the same process for my 2020 Audi q3 sline ?

Cool, thanks for video, I just ordered mine from your link. I hope it helps you:) ( did you by chance notice the panel above it for removal where the start/stop and volume buttons are for popping that panel out? I know you gently remove the volume knob, but Im new to this car ( im used to A4s:) I need to put my helix audio dsp, circular conductor, volume/sub level controler dead center of that panel, in between start/stop and volume knobs- thanks in advance if you know( it appears a typical nylon, pry tool may pop it out once you remove the volume knob, but I dont want to break anything.