@@michaelloureiro no, I just used the high level input on the Rockville internal Amp. I pulled the signal from the rear factory subwoofer. I do explain this in the video at 9m.
@kevinbeasley1615Күн бұрын
You have a really good looking truck
@T_B_C_LКүн бұрын
@@kevinbeasley1615 These new Colorados sure are nice looking. Greatly appreciate the positive feedback 🍻
@benjaminrender5172 күн бұрын
pissing me off. having very difficult getting to connect to my phone after i have installed the app. keeps saying device not connected, but that it already exists when i click add device and scan QR code
@T_B_C_L2 күн бұрын
@@benjaminrender517 yea, I was having issues with this reolink doorbell as well, I eventually moved on to all eufy cameras. I've has a great experience so far and it's been a little over a year.
@johnr42072 күн бұрын
Looks good. That truck should have had them from the factory.
@T_B_C_L2 күн бұрын
@@johnr4207 tell me about it. Honestly this truck should have had these hood struts and a garage door opener and a power rear window for $54k. I'm sure I a couple years they will add all these options, so we can trade in our trucks for a new one... 😂
@pixelsimage2 күн бұрын
Bummer there is such an audio delay.
@T_B_C_L2 күн бұрын
@@pixelsimage I just got my zfold 6 and the audio is almost perfect on this phone. I'm not sure if the bt was just wonky on my fold 5 or the bt is just better on my fold 6 🤷
@johnstahl89413 күн бұрын
Thanks for this! This made my install super easy. I never even looked at the instructions! Took me about 4.5hrs with a bum shoulder. Thanks!!
@T_B_C_L3 күн бұрын
@@johnstahl8941 heck yea man. Cheers to not ruining your seat, getting in and out of your truck 🍻
@stephensmith38694 күн бұрын
So I have a 2024 Colorado Zr2. Connectors don’t fit. I’ll call Bobs automotive mirrors to see if there is a solution.
@T_B_C_L4 күн бұрын
@@stephensmith3869 so you don't have a 10 pin connector?
@0xVeniVidiVici4 күн бұрын
Man I am really struggling to get the plastic trim piece back on with the new mirror. I'm going to try using a dremel to shave off some of the plastic surrounding the mirror arm to see if that helps.
@T_B_C_L4 күн бұрын
@@0xVeniVidiVici yea I looked closer after install and cut a little off the plastic piece to get a better fit. Can't tell at all. Just cut what you need and it should be fine.
@z77jabbjaw4 күн бұрын
Hey brother thanks for the video I got a 23 at4x last September been watching your videos since then. I'm here in the valley also. keep up the great content!
@T_B_C_L4 күн бұрын
@@z77jabbjaw you got the high class version of these trucks for sure. I finally got around to getting the hood struts and getting ready to record that video right now. Got the red line kit on prime day for like $75 I think it was. Anyways, I definitely appreciate the support 🍻
@donaldbradford24425 күн бұрын
Thank you very much
@T_B_C_L5 күн бұрын
@@donaldbradford2442 🍻
@attack03486 күн бұрын
CS762 win~
@T_B_C_L6 күн бұрын
@@attack0348 🍻
@scottlawrence85716 күн бұрын
If you turn caliper One side of that tool is for inside of opening and one side for outside
@T_B_C_L6 күн бұрын
@@scottlawrence8571 appreciate the tip 😉
@michellerericha21209 күн бұрын
Heckkkk nooo. …. 2200$ and waiting 3 months with no warranty etc. why ? Why not buy a happy run bike or something?
@T_B_C_L9 күн бұрын
@@michellerericha2120 what is a "happy run bike?
@milezna53029 күн бұрын
Hello excuse for my ignorance its my first time having a truck chevy colorado, do you think that floor mats fit on my colorado LT 2023 before i buy it? thank you sir
@T_B_C_L9 күн бұрын
@@milezna5302 yes these will fit all of the 2023 + Colorado and Canyon trucks.
@aaronvogt33510 күн бұрын
Android Auto? Did you jailbreak your phone?
@T_B_C_L9 күн бұрын
@@aaronvogt335 no need to root your phone. I explain how I accomplish this in this video. kzbin.info/www/bejne/m5TKcoyHptqmna8si=cbq0x3dTVpKfO8uS
@AlexM17.10 күн бұрын
Hey so im about to try this with my crew cab wt but for now im only doing the front 2 just to get started so basically can follow your video for a guide... if I have both regulators and door harness will it only work with the switch just for 2 windows? I tried to test it out and the switch didn't do anything. The switch I have now is a ltz one from a cew cab im looking for some help if you can would be well appreciated man!
@T_B_C_L10 күн бұрын
@@AlexM17. Unfortunately the switch for a crew cab is completely different then the one I used. The switch I used is specifically for a single cab that will only control 2 windows. In your case you will need to figure out how the crew cab switch works.
@AlexM17.10 күн бұрын
@@T_B_C_L So if i get one that controls 2 windows like for a single cab for now do you think that will work? because I am only doing the front 2 for now im just trying to get it started
@T_B_C_L10 күн бұрын
@@AlexM17. It will work for sure but you will need the entire Bezel not just the switches. Unless you want to rig it up like I did. That was only temporary though.
@ashtonharvey572310 күн бұрын
Kenwood seems to sound a lot better, sounded louder even on my phone vs the other
@T_B_C_L10 күн бұрын
@@ashtonharvey5723 try to listen with headphones or a nice Bluetooth speaker.
@ashtonharvey572310 күн бұрын
@@T_B_C_L do they suck?I need higher end mostly because I have a subwoofer
@T_B_C_L10 күн бұрын
@@ashtonharvey5723 i have more videos here. Definitely try to listen on something other than your phone.
@PIPERBOYWILLIAMS10 күн бұрын
Gold is so disrracting.
@T_B_C_L10 күн бұрын
@@PIPERBOYWILLIAMS they come with speaker grills... 😂
@PIPERBOYWILLIAMS10 күн бұрын
@@T_B_C_L you can still see the gold. Why do yall always pick those cheap klipsch speakers ?
@T_B_C_L10 күн бұрын
@@PIPERBOYWILLIAMS what do you suggest? Also you absolutely cannot see the Gold unless you shine a bright light directly on the grill.
@PIPERBOYWILLIAMS10 күн бұрын
@T_B_C_L if you're going to go inexpensive I would atleast get Polk R700's or Kef 950's. They image better and sound deeper. People who don't know what they are doing normally get klipsch. Kefs are easy to drive but fan sound better. Klipsch are bright fatigueing speakers.
@T_B_C_L10 күн бұрын
@@PIPERBOYWILLIAMS kefs are way overpriced and overrated, but I guess that's just my opinion.
@markbauer939311 күн бұрын
Aftermarket sub hookup?
@T_B_C_L10 күн бұрын
@@markbauer9393 yes I have a 4 channel Amp and a sub hooked up to it via rca outputs from the radio.
@mauriceperkins456612 күн бұрын
That’s good you are still working on your truck and your kids right there watching everything that you’re doing I like that father son that’s the best thing to do
@T_B_C_L12 күн бұрын
@@mauriceperkins4566 trying to keep these kids interested sure is difficult nowadays but I try! They definitely hate pulling weeds 😂. Thx for watching and commenting 🍻
@ernsttech525513 күн бұрын
is physics, you have to check the speaker frequency response in order to set a properly crossover value, not just 80 Hz
@T_B_C_L13 күн бұрын
@@ernsttech5255 These towers are rated 32hz-25khz.
@Fire8cooking14 күн бұрын
Never mind all that show that tree one more time
@T_B_C_L13 күн бұрын
@@Fire8cooking the tree?
@jollyroger546415 күн бұрын
Excellent video! Thanks for posting. Question: On the oil drain plug, does it use a metal crush-type washer or a rubber gasket?
@T_B_C_L14 күн бұрын
@@jollyroger5464 mine had a rubber gasket.
@jasonhepton802418 күн бұрын
Not hub centric😂
@jasonhepton802418 күн бұрын
Super helpful, nice ZR2, you always have good content and a great attitude🤙
@T_B_C_L18 күн бұрын
@@jasonhepton8024 thx man I really appreciate the positive feedback 🍺
@maxcaz1720 күн бұрын
I wonder if you can make it turn off after you turn off the truck?
@T_B_C_L20 күн бұрын
@@maxcaz17 I believe there is a setting that will do that but honestly that would kinda suck, because the radio turns on super fast normally. If it had to reboot everytime, it kinda defeats the purpose of the quick boot.
@maxcaz1720 күн бұрын
Can you change the start up animation on these? To like a Chevy logo start up?
You got a video of how you installed the amp in that smaller cubby?
@T_B_C_L20 күн бұрын
@@johnlopez7835 unfortunately I did this install before I started making videos. Sorry.
@joshuahartley666421 күн бұрын
Great video, going to order this for my Denali and follow along. Remember to wipe the camera lens before filming though bro!
@T_B_C_L20 күн бұрын
@@joshuahartley6664 you have no idea, how many times I've been the victim of a dirty lens... 😂 Appreciate the positive feedback 🍻
@mikehaight757521 күн бұрын
Any update on this a month later? Does it drain the battery when the truck is off?
@T_B_C_L21 күн бұрын
@@mikehaight7575 honestly I haven't discovered anything negative at all. It has taken multiple updates and all went fine. The dsp ui has been updated and working even better than before. No battery drain and data stiil works perfect. All on all I can still highly recommend.
@mikehaight757521 күн бұрын
@@T_B_C_L thanks for the feed back. Looks like I'll be purchasing this for my Chevy now. Thanks for your video
@T_B_C_L21 күн бұрын
@@mikehaight7575 np, and good luck with your purchase 🍻
@jameskidd6121 күн бұрын
The American bass sounds way better in my opinion
@T_B_C_L21 күн бұрын
@@jameskidd61 the American Bass are great sounding for sure!
@johnr420722 күн бұрын
Maybe a new Dremel tools in order and you can do a review on it. lol.
@T_B_C_L22 күн бұрын
@@johnr4207 you didn't like my Benford 5000 dremel tool... 😂
@Lunentucker22 күн бұрын
Great job and video. I'm still shopping, but this is bookmarked!
@T_B_C_L22 күн бұрын
@@Lunentucker appreciate the positive feedback 🍻
@lopez0x19323 күн бұрын
Good video 👍🏽 I’m not a big fan of the beeping noise but works like a charm good work.
@T_B_C_L22 күн бұрын
@@lopez0x193 appreciate the positive feedback 🍻
@na230523 күн бұрын
NYW, did you get the front realigned?
@T_B_C_L23 күн бұрын
@@na2305 yes I did. Truck drove fine but I wanted to be sure. Stupid me, I took it to the dealer and they actually messed up the alignment. I took it back a second time, then they blamed it on the rack 🤦♂️. I took it to the alignment shop I've been going to for 20 years and he aligned it no problem. Unfortunately I'm not even sure if it needed it because of the dealership nonsense.
@na230523 күн бұрын
The Amazon spacers were probably a lower grade hardened steel.
@T_B_C_L23 күн бұрын
@@na2305 they are rated 10.9 which I believe is same as factory but they just didn't feel as good. They are probably fine, but in the future I will probably always go with the Boras.
@Texasfishingaddict24 күн бұрын
Did u have a soft start kit installed on your 4ton ac unit thanks
@T_B_C_L23 күн бұрын
@@Texasfishingaddict funny you asked that because I literally just installed one 2 days ago. Generator would run but definitely did not like it when the A/C would come on. Before the soft start I was pulling over 70amps on start now it's like 26amps. I haven't tested the generator yet but my guess is, it will be much happier. I need to change the oil on the pulsar but after, I will probably do an update video on the generator.
@Texasfishingaddict22 күн бұрын
@@T_B_C_L awesome thanks how much did it cost to get the soft start installed.
@T_B_C_L22 күн бұрын
@@Texasfishingaddict this what I installed. www.hutchmountain.com/products/micro-air-easystart%E2%84%A2-368-soft-starter-residential?variant=47500711100649 I'm obviously not an electrician or an HVAC guy but I was able to get it installed no problem. I should have made a video of the install.
@donaldrogers218324 күн бұрын
Your pump is on a timer.
@T_B_C_L24 күн бұрын
@@donaldrogers2183 yes
@T_B_C_L2 күн бұрын
The waterfall is not on a timer.
@RHTR3s25 күн бұрын
Nice bro
@T_B_C_L24 күн бұрын
@@RHTR3s appreciate the positive feedback 🍻
@duanebledsoe756627 күн бұрын
Look at the surround on the woofer cone. The Crunch surround is much fatter. That’s one indication that it is capable of playing lows better. It provides a lot of cone movement which really helps with bass. The others you mentioned, Pioneer, Kenwood, JVC, they all have thin cloth surrounds. That doesn’t provide enough cone travel for low bass. I’m not even sure if there isn’t also some air loss through the cloth. Cloth surrounds on a speaker cone is an automatic deal breaker when I’m looking for speakers. I’d like to hear that Crunch speaker up against a Pioneer TS-A series 6-1/2. That is more of an equal matchup. Pioneer’s TS-F and TS-G series are very low grade. F for fail, G for garbage. The A series is where they start to get good.
@T_B_C_L27 күн бұрын
@@duanebledsoe7566 I do have some more D4S and skar speakers that I will be comparing soon. I also accidentally ordered some 6 1/2 midrange a long time ago not realize it, but I'll probably throw those in as a comparison also. Thx for watching and commenting 🍻
@duanebledsoe756627 күн бұрын
Those Crunch speakers (widely considered a flea market brand here) ABSOLUTELY DESTROYED those JVC’s (a mainstream brand name). If the tweeters were better on those I’d be sold on them. They could put better tweets on them and double the price and it would still be worth it.
@T_B_C_L27 күн бұрын
@@duanebledsoe7566 they are definitely a swapmeet brand but surprisingly sound pretty good.
@duanebledsoe756627 күн бұрын
Honestly this could go either way. Depends on what you’re looking for. The American Bass definitely has the overall sound quality between the two. But the Crunch was not bad and the bass was a lot more robust. I think with speakers of this size, it’s easier to add highs than bass, so between the two I’d take the Crunch just because it seems to naturally have better bass and I could always tweak the EQ to heighten the highs.
@T_B_C_L27 күн бұрын
@@duanebledsoe7566 both are good speakers but for the money, you can get 2 sets of crunch for the price of one set of AB.
@Dirtymax_Danimal27 күн бұрын
Very clean!!
@johnr420727 күн бұрын
Clean install.
@thehouseofhorsepowerautobo450628 күн бұрын
Great video! I'm going to swap mine out now!
@T_B_C_L27 күн бұрын
@@thehouseofhorsepowerautobo4506 appreciate the positive feedback 🍻
@TalonBytes28 күн бұрын
Thanks for the video. I'm curious. How has it held up over the last year? Still great?
@T_B_C_L28 күн бұрын
@@TalonBytes this has been on a few trips and held up great. I also place and remove it from this case almost daily. I would recommend it.
@victormanuelchal29 күн бұрын
he visto todos tus videos comparaciónes entre CRUNCH VS todos los demás y me impresiona la calidad de sonido CRUNCH. parecen un gama media alta. Gracias he comprado 4 de ellos para mi Citroen DS4 en Colombia.
@T_B_C_L29 күн бұрын
@@victormanuelchal @victormanuelchal The Crunch suena muy bien por el dinero. Gracias por ver y comentar.
@user-om5wk6zh4rАй бұрын
Are these 4ply or 12ply?
@T_B_C_LАй бұрын
@@user-om5wk6zh4r they were either 10 or 12 but I would be lying if I said I remember for sure. I sold them because the truck I ordered never came in.
@wyattknight888Ай бұрын
How is the AI box UI with the netflix and youtube? Interested if you can set it to automatically go to CarPlay or if it goes to UI every time
@T_B_C_LАй бұрын
@@wyattknight888 mine goes straight to Android Auto, carplay may be different kzbin.infoLW3l_DLfv7Q?si=iOzxKduZF1wraGaD
@wyattknight88827 күн бұрын
@@T_B_C_LInteresting. Just got mine delivered today. Still playing around with it but seems to go to UI everytime for CarPlay. Have you been enjoying yours so far? Appreciate the feedback!
@T_B_C_L27 күн бұрын
@@wyattknight888 yea that's odd. Only issue I'm having is an echoing going on while a call. Just haven't had time to look into it yet.
@wyattknight88825 күн бұрын
@@T_B_C_LIm having some slight echo as well but as in I can hear myself coming from their microphone sometimes. If you find anything else, let me know 🤙
@T_B_C_L25 күн бұрын
@@wyattknight888 I message eonon so we will see. If then don't have a fix, I'm gonna have to send it back.
@17Shkurt2008PavarsiaАй бұрын
You did a mistake when you installed the blue amplifier on/off wire. It should be connected to your radio harness, on your amplifier wire so this way it will turn the amp on when you turn the radio on and off when you turn the radio off. You cannot have the amp wire installed straight to the battery because it will leave your amplifier on all the time and it will drain your battery and possibly cause other issues from being overheated staying always on
@T_B_C_LАй бұрын
@@17Shkurt2008Pavarsia I appreciate your sincere constructive criticism but it was never connected to 12v constant rather it was connected to a 12v switched circuit. Furthermore as stated in the video kzbin.info/www/bejne/poOXmZyIZ66fqNUsi=slgSJT03H43cgoWO&t=16m36s I never used the blue wire as the high level inputs worked perfectly to turn the amplifier on.