I have a small blue Vevor and I fill some heavy hitting PCP rifles , like the Umarex Hammer , Air Force Texan LSS.510 , and two AEA's , the .510 Element Max and the Challenger Bullpup.357 . It's never once failed me . 😊
@Themightymooseoutdoor8716 күн бұрын
That's awesome!
@blistersteel19 күн бұрын
You might consider making an X account for your channel . They are very friendly to our hobbies. KZbin has been crushing us ever more.
@Themightymooseoutdoor8719 күн бұрын
That's a good call out! KZbin has definitely been cracking down.
@blistersteel19 күн бұрын
That bucket of water was a hassle .it kept me out of the game for a long time.
@Themightymooseoutdoor8719 күн бұрын
Same!
@6000pounds22 күн бұрын
What am I looking at?
@Themightymooseoutdoor8722 күн бұрын
The algorithm has led you to a video on high pressure air compressors apparently haha
@6000pounds21 күн бұрын
@Themightymooseoutdoor87 oh its gun related. I like guns.
@Themightymooseoutdoor8721 күн бұрын
@6000pounds you are in the right place then! Specifically it's for airguns, but I do other firearm related stuff too.
@billhinkle165327 күн бұрын
POS. It requires daily.maintenance.
@Themightymooseoutdoor8727 күн бұрын
What daily maintenance? I've never done daily maintenance on any of my compressors
@stedyone109027 күн бұрын
Nice
@grabir0127 күн бұрын
I have heard the the Umarex air guns have slow leak problems.
@Themightymooseoutdoor8727 күн бұрын
That's what I've seen since this review - I need to track it down.
@BostonWhoFan51528 күн бұрын
Hey man. I have the GX CS4-I compressor. Last night, I accidently bumped the grease pot about an 1/8th of a turn. I'm only about 100-200 hrs in. Do you think that little bit of a turn injected any grease? I'm so mad at myself for this.
@Themightymooseoutdoor8727 күн бұрын
Honestly 1/8th of a turn with 100 hours I'm sure you're fine. I've turned mine more than I should before, and it runs fine still! Cranking it a turn or two would probably be mad, but I wouldn't sweat it
@BostonWhoFan51527 күн бұрын
@Themightymooseoutdoor87 Before I did it, I noticed that when filling my Avenger to 300bar, the pumping sound got a little louder like it was working harder. It didn't do that at first. After the accidental bump on the grease pot that went away. It sounds normal again. I made sure to do a few dead head tests right after I bumped it just to circulate any new grease that may have been introduced. All seems well now. Ironically, I had the same random power failure as you on one of my first fills after receiving the compressor. I tried twiddling wires like you, but it didn't help. I put the shielding back on and was ready to send an email to GX, and it just came on all of a sudden. I did have to email them anyway, though, because one of the needles in my guage wasn't straight. It was bent/pushed to the left. I fixed it by just pushing it down and against the zero stop pin. It lined right back up. So I told them about that and the odd power failure, and allegedly, they're sending me a new guage and power supply. 👍 They also told me to unplug the "sensor." They're said their engineers found it to be unnecessary and potentially problematic when active. That's what they chalked up the power failure to. I'm not gonna bother, but I figured I'd share that with you. I talked to them extensively. The language barrier was tough at times, but the dude was super cool. I'm hesitant to try and fill a 6.8L tank.
@Themightymooseoutdoor8727 күн бұрын
@BostonWhoFan515 good to know! That's the first I've heard of other people hitting that power issue. You may have just been low on grease anyway? Tough to tell, I wish it had an indicator. Ya my experiences with their customer service has been the same - they are eager to help, but language can be tricky, that's why I try to help out when I can haha.
@Themightymooseoutdoor8727 күн бұрын
@BostonWhoFan515 which sensor were they referring to?
@BostonWhoFan51527 күн бұрын
@Themightymooseoutdoor87 the heat sensor. He said to unplug it because their "engineers" found it to be troublesome and the likely culprit of the power failure. He also said that they feel the unit is so competent that reaching such temps would be so unusual that the sensor is unnecessary. I guess unplugging it and avoiding power issues outweighs the unit overheating 🤷🏻♂️. Like I said, I didn't do it, and everything's fine. He even sent me a video on how to get to it and remove it.
@josho510829 күн бұрын
Maybe this has been said already, but yes, there was an Armalite AR-7 in “From Russia, With Love”. Also, Charles Bronson took out a Formula One race car with one somehow, lol
@PhuVet25 күн бұрын
Wouldn't take much nowadays, seen one taken out by bugs....
@TheBeefSlayerАй бұрын
I think splitting small wood at camp sight with wooden baton would maybe work.
@Sw1tchTubeАй бұрын
Yo moose, My cs4i has a squeak when filling I got a video but not sure where to post it. It's not all the time but fairly consistent. It sounds like air. I prob only have a little over and hour run time. Any ideas?
@Themightymooseoutdoor87Ай бұрын
Sounds like your bleed valve is probably open - double check that. Are you seeing slow fill times?
@Sw1tchTubeАй бұрын
@@Themightymooseoutdoor87 From 800 psi to 4500 was 23 mins so I dont think so, and the bleed valve was closed
@Themightymooseoutdoor87Ай бұрын
Ya that seems normal. Might need some grease - double check your manual and see if you should turn the grease dial a little bit when you first get it.
@TheFloridaBikeVloggerАй бұрын
sorry to ask so many questions again but if I buy the CS4, do I not need to buy a water/oil separator?
@Themightymooseoutdoor87Ай бұрын
You are good! It has a basic one built in, but if you live in a high humidity area or want extra protection I would recommend getting one, something like this should work well. amzn.to/3Yt1V4X
@TheFloridaBikeVloggerАй бұрын
@@Themightymooseoutdoor87 thank you, since i live in florida, I think I will get a secondary just to be safe. I empty my dehumidifier like 3x a day lol
@TheFloridaBikeVloggerАй бұрын
@@Themightymooseoutdoor87 thank you for the link, adding to my cart as we speak
@TheFloridaBikeVloggerАй бұрын
@@Themightymooseoutdoor87 sorry to bother you again do I need to buy an extra fill hose if I plan to use a secondary that you linked me?
@Themightymooseoutdoor87Ай бұрын
@TheFloridaBikeVlogger probably a good idea haha. I live in the desert, so I have the opposite problem - I fill my humidifier every night 😂
@TheFloridaBikeVloggerАй бұрын
do you write down the run times on each fill?
@Themightymooseoutdoor87Ай бұрын
That would be a good idea, but I am not that meticulous haha
@TheFloridaBikeVloggerАй бұрын
@@Themightymooseoutdoor87 right on!
@TheFloridaBikeVloggerАй бұрын
want one of these to start filling my panitball tanks, am I crazy for that? just found out about these
@Themightymooseoutdoor8729 күн бұрын
That's what a lot of people use them for! Or HPA airsoft, or airguns. I'm doing a video on cheaper ones soon too
@user-zo4yr1xq7tАй бұрын
how many minutes can work in one shot
@Themightymooseoutdoor87Ай бұрын
30 minutes - if you need a longer run time I would check out my video on the CS4, or CS4-I. Amazon link to the CS4-I here amzn.to/4foykQp
@user-zo4yr1xq7tАй бұрын
@@Themightymooseoutdoor87 gx E cs3 1 my compressor
@stephenbroadhurst7653Ай бұрын
Brilliant video, thanks.👍
@Themightymooseoutdoor87Ай бұрын
Glad it was useful!
@adameinhorn169Ай бұрын
How did you mount the pressure pad for the light?
@Themightymooseoutdoor87Ай бұрын
Super glue! Just be sure you like where it's at. Worse case you sand it off and it becomes a scuff mark.
@ryanlane1651Ай бұрын
Have you had any problems with it i just bought one
@Themightymooseoutdoor87Ай бұрын
Mine seems to have a very very slow leak, but I need to test it for sure.
@ryanlane1651Ай бұрын
@Themightymooseoutdoor87 thank you I hope mine turns out OK
@Themightymooseoutdoor87Ай бұрын
@ryanlane1651 I'm sure it will! I'm not even positive mine has a leak, it just always seems a little bit lower in pressure then when I put it away. Leaks are normally an easy fix anyway. Let me know if you run into any issues
@ryanlane1651Ай бұрын
@@Themightymooseoutdoor87 how do you air your up
@Themightymooseoutdoor87Ай бұрын
@ryanlane1651 a few options - you can use a hand pump (I don't recommend this, it'll take forever) buy a scuba tank that you get filled locally and then fill from that, or buy a PCp compressor. I have quite a few videos on compressors actually. If you give me a budget you are trying to stay in I can give you a recommendation. Scuba tanks and compressors cost about the same, so I like filling my own. Many compressors let you fill tanks as well..
@vicbar89Ай бұрын
Hola. Consulto. Que tipo de grasa lleva el cabezal? Gracias
@Themightymooseoutdoor87Ай бұрын
Algo asi amzn.to/3WJhqo3
@ramonacapps5071Ай бұрын
Make zucchini bread!! Omg wasteful
@Themightymooseoutdoor87Ай бұрын
Several Zucchini were harmed in the making of this video
@Twigz11Ай бұрын
Thanks for the info. After getting a Yong Heng and filling a 68ci bottle once to 3.8k psi it had a massive leak from I think the cylinder gasket the next time i went to use it. Returning it and going with the Cs4i, I don't want compressor maintenance to be the main portion of the hobby.
@Themightymooseoutdoor87Ай бұрын
I hear you on that one! Yong hengs were great back in the day, but I much prefer these. If you use my link it supports my channel at no cost to you 🙂
@besteffortintАй бұрын
Just like opening the hood of your car and pointing at things you see, taking off the outer shell and pointing at things is not a "Tear Down".
@Themightymooseoutdoor87Ай бұрын
Fair, my goal was to just show the internal components and how to access them - not sure what a better title would be that isn't overly wordy.
@besteffortintАй бұрын
@@Themightymooseoutdoor87 Fair enough my man, still enjoyed the video! Thank you for putting it together!
@Themightymooseoutdoor87Ай бұрын
Glad it was useful! If you end up buying one, using my link supports the channel. Have a great day!
@besteffortintАй бұрын
@@Themightymooseoutdoor87 I do have one question as I am seriously looking at several brands, what kind of grease do these things take and how would I service the cylinder with it? Are they easy to tear down?
@Themightymooseoutdoor87Ай бұрын
@besteffortint just some super lube like this. amzn.to/3LN3zac It's pretty easy! you only do it every 100 hours or so if I recall. I'm planning on doing a video of it sometime soon
@DREKOWICK69Ай бұрын
If I am tryna just fill bottles at home, does that come with everything I need for paintball?
@Themightymooseoutdoor87Ай бұрын
You'll need a fill adapter for your tank, the hose on this has a foster connection. If your tank has the adapter already (many do) you should be able to hook this directly to your tank. Foster fill adapter is what you want to look for in the tank. This has it for example amzn.to/3WE4job So does this amzn.to/4c01Skg This does not amzn.to/3Wj0ZgZ
@DREKOWICK69Ай бұрын
@@Themightymooseoutdoor87 thank you!
@Themightymooseoutdoor87Ай бұрын
@DREKOWICK69 you bet! If you plan to purchase a compressor or tank please use my affiliate links, it supports my channel 🙂 Let me know if you have any other questions
@DREKOWICK69Ай бұрын
@@Themightymooseoutdoor87 thanks again, so really if I have a reg already on my tank that has a fill nipple, I am good to go with the hose that comes with the compressor?
@DREKOWICK69Ай бұрын
@@Themightymooseoutdoor87 forsure going to use your link, also looking at adding that hour timer thing that one buy makes at target forge as i am learning you need to track the hours to turn the grease piston?
@andrescienega3105Ай бұрын
Comes with fill probe?
@Themightymooseoutdoor87Ай бұрын
The gauntlet doesn't have a full probe, just a standard foster fitting - should work with any standard pump!
@airgunnerxf9157Ай бұрын
Awesome! I want one so bad Also you cheaped out on the optic? 🤨 they’re good optics don’t get me wrong but having a great rifle but a cheap scope won’t do very good for accuracy, get an element atleast!! It makes a big difference I didn’t know until I bought my first 4 hundred+ air gun scope.
@Themightymooseoutdoor87Ай бұрын
I know it feels like a crime having a cheap optic on it haha. I ended up with another one, but this one still served me well for a long time.
@deanbarrow89Ай бұрын
What grease do you use , can you show how this is topped up as well , be interesting to see video of correct procedure
@Themightymooseoutdoor87Ай бұрын
This stuff! amzn.to/3Sj7T4D I don't have a video for that, but I'll make one this week for you. Stay tuned!
@Brrr410lbcАй бұрын
How is the eye height? Still ok cheek weld?
@Themightymooseoutdoor87Ай бұрын
Yup! Although I've since switched to a holosun 509T and much prefer that. I can post a video showing that soon if it would be useful
@user-lo1kw8yl3iАй бұрын
Can these fill scba tanks ? Thx
@Themightymooseoutdoor87Ай бұрын
Definitely, although I don't know if scuba has specific air quality requirements
@user-lo1kw8yl3iАй бұрын
The scott 45 cf fireman bottles , thank you
@billhinkle1653Ай бұрын
You should leave the bleed valve OPEN until after you start the compressor. You started it under load, which puts quite a strain on the motor.
@Themightymooseoutdoor87Ай бұрын
Yup! I normally do but slipped up. Good catch!
@BostonWhoFan515Ай бұрын
Ok, dude, I watched all of your videos on this new model. I already have a couple of the smaller lunch box size compressors, but I want something with more manual operations (ie.water cooled, grease pot) so I can actually assist in it running better for longer, instead of just depending on a fan to keep my smaller ones running. I'm only filling airguns, not separate tanks. So, based on things you've said in your videos, I have a few questions on this particular unit... 1) You mentioned in a previous video that you recommend an inline filter. I believe you even left a link to one of the long filters with the inner element that can be filled with various things like molecular seive, silica, and charcoal... but you're not using one here with your own PCP... Did you mean that you recommend it for separate tanks and not when going straight into an airgun? 2) If that's the case, that line doesn't appear to have any filters at all. Not even the short bulky ones that are found on most fill whips that come with these overseas compressors. I'm guessing there may be a built-in filter somewhere behind the bleed valve area 🤷🏻♂️. If there is, how do we change it when needed? 3) Do you recommend paying for the extra 3 or 4 year insurance that Amazon offers? Did you include that with your purchase? I feel it's a good idea, just in case things go wrong after the regular warranty time frame has expired, which is probably a year. 4) Although it's fairly new to you, what do you honestly expect its lifetime to be if you had to guess? I'm literally ready to pull the trigger (no pun) on it ASAP, because there's a discount for "Prime Day" that's running right now, offering 20% off, and it's due to end soon. So, hopefully, I hear from you quickly, lol. I'll gladly use your affiliate link. I'm always down to support people who offer help like you. Your reviews are stellar. Clear and percise. Anyway, I appreciate your time. Cheers!
@Themightymooseoutdoor87Ай бұрын
I'm so sorry I didn't get to this in time for sales, hopefully you still got one! I do recommend one from the compressor to anything, tank or gun - I believe these have a very small filter inside the machine, but I'll verify that. I don't use one for 2 reasons 1. I'm in a very dry climate, so moisture has never been a problem across the various pcps I've owned and 2. I'm lazy and want to get someone to send me one to test 🤣 I think it can be a good deal, although I've never used one. As long as it's honored it could be worthwhile. A long those notes I would guess 5-10 years with minor repairs/maintenance (grease, maybe cleaning fans, replacement cracked or broken hoses) And then maybe replacing major parts after those. My 4 year old (I think) GX pump still works great.
@BostonWhoFan515Ай бұрын
@Themightymooseoutdoor87 great info. Thanks man!
@Themightymooseoutdoor87Ай бұрын
@BostonWhoFan515 you bet! Let me know if you have any other questions
@BostonWhoFan515Ай бұрын
@@Themightymooseoutdoor87 do you own an avenger?
@Themightymooseoutdoor87Ай бұрын
@BostonWhoFan515 I don't, but I wish I did! They seen like a great value
@simpledude5974Ай бұрын
Thank you! 👍
@chairpeople1931Ай бұрын
My buddy bought that same knife (the second one) as a gift for someone. He got it off amazon. Also that’s not how fossils work.
@Themightymooseoutdoor87Ай бұрын
Ya I ended up finding where they are made, fell for that one.
@Sw1tchTubeАй бұрын
Yoo I'm having issues with my cs4i not filling up the coolant as far as it needs to be. I csnt get it to overflow
@Themightymooseoutdoor87Ай бұрын
Is it leaking out the bottom somewhere?
@Themightymooseoutdoor87Ай бұрын
I'd pop the case off(just the black metal screws) and see if one of the hoses came loose.
@Sw1tchTubeАй бұрын
@Themightymooseoutdoor87 so I confirmed the pumps circulating. I can see the antifreeze cycling up top where you fill the tank, I see the coolant circulating with the case off. Lines are full. But it seems no matter how much I put in the water tank it doesn't overflow to the line at the bottom on the front of the case. So how do I know when it's full?
@Sw1tchTubeАй бұрын
@@Themightymooseoutdoor87 no leaks
@Themightymooseoutdoor87Ай бұрын
If there aren't any leaks anywhere, I'd keep filling to it gets to the fill line. Remember it's not just filling the tank, it's also filling the pump and hoses. Triple check you don't have any leaks though
@JohnDoe-sw4kgАй бұрын
I hate to tell you but i can all but gurantee that thats cheapo made in Pakistan scrap
@edrozenrozen9600Ай бұрын
I don't know about the knife... But the sheath looks double stitched.. It's probably not Pakistani.
@Themightymooseoutdoor87Ай бұрын
Certainly possible, but I hope not! I haven't found any copies available online.
@Themightymooseoutdoor87Ай бұрын
@JohnDoe-sw4kg hit it right on the head my guy - I did a reverse image search and found the exact knife for sale from a dozen different sources, some at 1/5th the price. Going to go back to the shop and see what they say.
@themoderncowboy7437Ай бұрын
The bowie style has the hallmarks of a knife I saw that was made by Vigo Mortensen. Meaning it would have been made in idaho, but in a town very near the Montana border.
@Themightymooseoutdoor87Ай бұрын
I'll look into that! Would be amazing if it was made by Vigo, but there's no way for the price haha. I didn't know he made knives!
@themoderncowboy7437Ай бұрын
@Themightymooseoutdoor87 he learned bladesmithing from one of the blacksmiths on the Lord Of the Rings set. Small shop in Clark Fork used to sell his knives. I don't remember if there was ever a makers mark on them though.
@Themightymooseoutdoor87Ай бұрын
@themoderncowboy7437 I didn't know that, but that is exactly the sort of thing I would expect from him! Such a legend
@Sw1tchTubeАй бұрын
Quick question is there a run time timer? How do you know when you've done 5 you're to regrease?
@Themightymooseoutdoor87Ай бұрын
There is not unfortunately, but it's fairly easy to add one! I just want till it starts to fill slower and then add grease
@Sw1tchTubeАй бұрын
I used your affiliate link after watching a few of your videos. Very helpful man! I ended up getting the Inverter one, hoping It's worth the extra money. Can you refill the Grease pits? Do you just use a grease gun to do so? Or is there a pack of grease you put in there?
@Themightymooseoutdoor87Ай бұрын
You legend! Yes you can! Basically any automotive grease should work, like super lube. amzn.to/3Lg3yuW Something like this ^^
@Sw1tchTubeАй бұрын
@Themightymooseoutdoor87 thanks, I have some of that. What's the normal fill time on a 68/45000 tank roughly?
@Themightymooseoutdoor87Ай бұрын
@Sw1tchTube I've never filled a tank of that size/pressure so I couldn't tell you - I'd be very interested to see what fill time you get though. I'm still trying to get into the air tank review scene, but haven't had much luck yet.
@Sw1tchTubeАй бұрын
@@Themightymooseoutdoor87 well you're doing a fantastic job. Your videos are informative. I will let you know my results.
@Themightymooseoutdoor87Ай бұрын
@Sw1tchTube thank you!
@sboy1955Ай бұрын
Very informative, thanks 👍🏽
@Themightymooseoutdoor87Ай бұрын
Glad it was useful! If you plan on buying one please use my link - it supports me at no cost to you 🙂
@dwaaziwaaziАй бұрын
How do you track VO2 max?
@Themightymooseoutdoor87Ай бұрын
It shows up in the Garmin app when you've been wearing it for awhile
@dwaaziwaaziАй бұрын
@@Themightymooseoutdoor87 the metics get thrown off as your exerting more and the watch thinks your running/working out less and I’m reading it’s better to turn off this feature.
@Themightymooseoutdoor87Ай бұрын
Oh good to know - I haven't tested vo2 max with a stroller. I'll have to compare with and without it
@MrPeterschmit2 ай бұрын
Thank you very much. Great job. I feel pretty comfortable with it after seeing this. I will use your link when the time comes. Promise.
@Themightymooseoutdoor872 ай бұрын
Glad it was useful!
@MrPeterschmit2 ай бұрын
Id like to see how long it takes to fill a tank. Great video btw.
@Themightymooseoutdoor872 ай бұрын
Less than a minute to fill the tank on the generator if it's full - but once it starts to get lower the pressure is significantly slower. (Also depends on how high it is) Thank you!
@MrPeterschmit2 ай бұрын
@@Themightymooseoutdoor87 I must be dumber than I thought. I have no clue what you're saying. What generator? Why would you fill a tank that's full already? Please explain.
@Themightymooseoutdoor872 ай бұрын
@MrPeterschmit oh oops 😅 I thought your comment was on my electrical generator video, and you were asking about how long to fill the gas tank with the gas pump I was using haha. I don't have a tank (yet, but hoping to get one soon) but it's a lot faster then my previous pumps. It'll fill my Benjamin marauder from 1500psi to full in just a couple minutes. I think my recent gauntlet video showed it filling the gauntlet from empty as well.
@MrPeterschmit2 ай бұрын
@@Themightymooseoutdoor87 hahaha. Thank god! You really had me scratching my head. Cheers.
@MrPeterschmit2 ай бұрын
I see these things are made in good ole China. Does it come with understandable directions?
@Themightymooseoutdoor872 ай бұрын
If does! A few grammar mistakes and such, but understandable. I'm happy to answer questions as well. Maybe I'll do a tutorial video if that would be helpful. If you end up buying one, please use my affiliate link - it helps me out a lot 🙂
@MrPeterschmit2 ай бұрын
@@Themightymooseoutdoor87 yes I think I might buy one and I will use your link. I would like to see a tutorial video. The auto shut-off looks sketchy to me and I could see where getting that wrong could cause serious problems.
@Themightymooseoutdoor872 ай бұрын
@MrPeterschmit I'll do a tutorial video this week then! Ya the auto shut off sketched me out too for awhile haha. It has a backup shut off, so it's a redundant system, but I totally get where you are coming from. I think it's still a good idea to keep an eye on it.
@Themightymooseoutdoor872 ай бұрын
@MrPeterschmit just pushed up a tutorial video for ya - hopefully it's helpful.
@Manuel-un4vm2 ай бұрын
this is a lot better than a 10/22
@Themightymooseoutdoor872 ай бұрын
Lots of fun for sure!
@rybaneightsix50852 ай бұрын
These are not 1x. I bought one of these two years ago and the glass is closer to 1.25x, making it useless for shooting both eyes open, which is the entire purpose of a red dot. Get a 515gm or just get an eotech or aimpoint. Holosun is more concerned with new sales gimmicks rather than perfecting a product.
@Themightymooseoutdoor872 ай бұрын
I haven't had issues shooting it with both eyes open, but I also shoot both eyes open with all my optics (including scopes). I'll check out the 515gm though!
@N7mudkip2 ай бұрын
Mine ( CORE model) is definitely 1x. I use it all the time. Although not with a magnifier
@Themightymooseoutdoor872 ай бұрын
Ya been shooting with mine more and it's a 1X for sure, comparing against an lpvo without true 1X. Even without a magnifier to go with it it's a great optic.
@user-gf7hf1vx3l2 ай бұрын
What ever happened did they fix that thing, did you shoot it, sell it?
@Themightymooseoutdoor872 ай бұрын
Just took it out today after getting it back! Running smooth, new video coming soon. Ended up sending it back to Beretta, took about 6 weeks to get back to me.
@user-gf7hf1vx3l2 ай бұрын
@@Themightymooseoutdoor87 Put about 100 rds, zero malfunctions, guess they fixed it. lol
@Themightymooseoutdoor872 ай бұрын
@user-gf7hf1vx3l I ended up sending mine back and it had a faulty trigger pack - I'll have an updated video here soon.
@user-vo8zz9sb7x2 ай бұрын
I have a CP-33, and I like it. But very disapppointed in the cheap 3D printed bolt buffer.