Thank you for this video. This was very helpful.

Hey Ron, thanks for the video, this was the combination I was looking for. How tall is the saw from floor to top of handle and top of saw when standing vertical? Any updates since you originally posted this? Thanks!

I have the same problem, but I don't blame the stand, it is the saw mount. Plastic piece of garbage and will not hold properly around the round stand rail. I am throwing away the saw mount that came with the stand and buying the more robust mount sold at Menards and hope that will solve the problem.

I need a trailer big enough for 3 dogs is there such a trailer. ( I have a American staff , English bull dog and a Staffordshire bull terrier)

Thanks. Got mine with Calyx. I had the MiFi 2000 with Calyx for a year. I switched to T-Mobile Home Internet SageComm V2 for a year, but just recently they started enforcing address location. Now rejoined Calyx (my 3rd year with them) and got the MiFi X Pro. The X Pro is much better than the 2000. I will try playing with these settings- very good to know.

This is can wear in the all country ?

I have the same system ..suppose the touch screen goes completely black and shuts down the unit but i still have electricity thru the house. Does this unit have a battery back up ???on the touch screen

How do you like this mitre saw , so far? Is it good quality? When you adjust angle, does it move after when you make a cut. Im thinking to buy this same saw. Make some more videos please. Keep up the good work.

Nice video. Some questions/comments: - When you showed the label on the outside condenser unit, your overlay commentary screen obscured most of it. - For the outside temperature sensor, was that for the HVAC system? I've seen (and have had) identical ones, but they are for the AutoTrac controller for just the humidifier. It was a a good idea to relocate that out of full sun. - Did you consider a combined heat pump version for heat, in lieu of replacing the furnace? - At one point you talked about the heat rising up in 1% increments. That's true for the full variable stage (NVA8 model I believe). If you have the NVA9, that's the five-stage unit (stage 1 at 25%, stage 5 at 100%; then varying levels for stages 2,3,4). - The energy saving mode, I believe you'd use that if have a variable-cost energy plan. That is, the (typically electric company) gives you below average electricity costs during off-peak / low usage periods, in exchange for either charging you more, or remotely disabling certain appliances - as a way to reduce the consumption during peak times. [My Rheem heat pump hot water heater has a similar setup (but I don't have that service from my electric company.)] If you have that electricity plan, you'd probably want this mode enabled. Else running your AC during this peak time could cost big bucks. I'm about to evaluate two Carrier heat pump systems: a two-stage Performance system, or the five-stage Infinity system. I really like the features the five (or variable) stage systems provides. But as I keep seeing in comments, I don't sense that the reliability of these highly-advanced units is rock solid. Couple that with it seems like any repair is going to be a four-digit one, I'm not sure it's the best unit for me. But I wish you the best luck with yours!

you shouldn't mess with the adjustment. Mine works great!

Same here Brother. I bought it at the beginning of a 2000 square foot LVP job. I actually was half reading the directions when I put it together. So I first put it together with the mounts backwards. I definitely noticed the wobble as I pulled the saw all the way to the front of the cut table. I figured I’d tighten things up after I got back to the shop. Ended up… I realized I was backwards. I moved everything around to match what the instructions say. And yes… the outfeed rails wouldn’t even hold a 1x4. I had it correct when I had it backwards. I got mine on sale for $120. It’s a shame the mounts are crap because other than that it’s great and has great other features. This needs fixed by masterforce asap. Hopefully in the next 3 years so I can break it and make a warranty claim.

I got mine with Verizon

i almost finished assembling mine. My 12" Masterforce saw base is about as long as the mounting brackets. That leaves me with no room to adjust the center of gravity as described in the manual. The mounting bolts are also too long. I ran out of thread before they were anywhere close to being tight. I thought the whole thing could be stored with the saw attached. That is not the case for anyone watching. You have to remove the saw before storing. I'll return it tomorrow. Thanks for you informative video.

I'm doing the same as well. I bought it for my 12 inch ryobi sliding miter saw and this thing just lifts and moves. Down right feels unsafe

SA Stands for Standalone meaning only 5G Bands not only a single band it could be on n25 and n41 or if on auto its typically a low 5g band and its partly using some 4g bandwidth. Just an FYI

When I use the RG45 its much faster than wifi, as I use it for work and cant have an jitter as otherwise my VPN jabber and SAP break.

Alot of money invested there sir. Hate to see u have a problem down the line prematurely and carrier not cover it.. Sometimes little things can be over looked.

Gwt that water heater blowing straight out not towards the brand new condenser and the down spout That combustion exhaust cant be any good for the outdoor coil....

I wish my dog would ride without barking the whole time she is in the Bark Ranger. Oh well, it works great like yours.

Hello, is it easy to stroll on rough/rocky/steep hiking trails? thank you!

Do you have to use Telstra?

Thank you thank you thank you. I have been attempting to change out the regular before and didn’t realize the “T” connector up under the chassis was where to disconnect the hose. I’ve paid 2 different times. Now I’ll be able to replace on my own. I’ve been searching for a couple of years. This video was extremely helpful.

I got this too

Thanks for the detailed review. How has the speed been for you using the RJ45 and usb tethering?

I've had this toaster about 4 years but didn't use it much till this year. I Discovered something I think you will Enjoy. I like Hot Dogs and even had the Cheap Little Hot Dog & Bun toaster. But... BAGELS & HOT DOG BUNS are Toasted on ONE SIDE. Maybe Toaster can do Hot Dog buns to. I Opened a Hot Dog Bun NOT SEPERATING THE HALVES. PUT THEM INTO THE BAGEL SLOT LONG WAYS STILL ATTACHED. SET TEMPERATURE LEVER BETWEEN 1 & 2 Closer to 2. Hit BAGEL & TOAST BUTTON and waited about 45 Seconds till they were automatically done. IT WORKED!!! I was so Happy. NOW TOASTED NOT BURN'T HOT DOG ROLLS. Easy Peasy NO WORK So if your kids or yourself want a hot dog without firing up the grill and just using the MICROWAVE (DOG WRAPPED IN A PAPER TOWEL FOR 43 SECONDS) AND TOASTER THAT TOASTS IN ABOUT THE SAME AMOUNT OF TIME. YOU'RE. ALL. SET. YEAH! & YOU CAN TOAST 4 ROLLS AT ONCE in the 4 BAGEL SLOTS. Have FUN.

that sway bar replacement job looks like a royal PITA! was it worth it?

i appreciate your uploading this video as I have a very similar rig to yours and will probably want to replace my propane regulator in the future - one note on the fridge I think I found that with the generator running it was hard to get the fridge going - turning off the generator did the trick

Crummy infinity user interface, app doesn't work. Read the reviews DO NOT BUY!

What’s the suspension like? Also what is the base of the trailer made from? Thank you for your great informative videos.

What a 'Breeevile' , its a Br e ville ! If you cant pronounce it, then why bother with yoir review

would two mid size 45 lbs fit?

Can you use it without the handlebar or is that part of the frame/structure?

In my case the magnet was dirty. I rubbed it and cleaned it good and now it sticks

At $209. it's WAAAAYY too overpriced.

How's it working?

Great video. We have the Walky Stick too. Been looking at trailers and your video is exactly what I was looking for

I've been installing Carrier equipment for 40 years. Wait until a circuit board or motor fails. You'll part with ~$800.00 to $1000.00 for the repair bill. Absolute garbage made in Mexico.

Not a good trailer for wet weather.

Is there an on/off switch

good video. 20 years would be a stretch :P

30 year life? Not with the new equipment. I tell everyone 17 years max.

Does it still work & how do you get crumbs out?

Hey I have the Kobalt twin cylinder oiless. Not bad . This is nice. At some point in time with a lot of use the cylinders piston need replacement . I also have a ingersol rand small dual tank similar oil lube. Going on 18 years . Only replaced the regulator.

Impressively quiet for an oil-less pump.

Good couple of videos. Thanks for the good walk through here; it will help in my decision. I always get a weird melancholy feeling when I start trying to figure out if my dogs might be happy or not. I sort of worry about my choices with them, etc etc. I think @photographingwildlife8779 has a healthy and helpful perspective on it...definitely would rather be out with you than stuck bored at home. The fact that a pup gets excited upon seeing the trailer is a great indicator as well. Have fun, and stay safe!

Am considering getting one of these for my pup! How much does your dog weigh? Mine is a doodle and weighs about 70lbs. Am concerned about the fit.

Excellent review. Very informative. Thank you so much for making this video. I know it’s been a few years. I was wondering, because I just installed pretty much the same system except mine is a heat pump. How is your system holding up so far? Thanks for the great review the infinity control panel. Not even the manufacture video explains it as well as you.

Those mesh windows aren't going to keep out the rain in bad weather.

He is clearly enjoying the ride and they always would rather be with you than left at home. Love it! Thanks for the reviews!

Great video thank you. I already checked out Part 1 and I'm most impressed by the detailed look at this trailer which I am thinking of getting for our dog after seeing someone else with one.