Thank you I just bought this monitor yesterday as a second portable laptop screen for work. I am excited to set it up and use it.
@htnowpro2 күн бұрын
You are very welcome. Enjoy your new purchase. Thank you for sharing.
@gav002 күн бұрын
I could still use my non security bit on 2 of the 4 screws and small drill bit to remove security pin on other 2 to fit my bit in to remove all screws. No new kit needed
@htnowpro2 күн бұрын
I am glad it worked out for you. Great idea.
@Oremautorepairs4 күн бұрын
Thank you, it worked
@htnowpro4 күн бұрын
Wonderful. 😊 Thank you for taking the time to share your success with everyone. Have a great day.
@stufields51255 күн бұрын
How do I obtain a laser cartridge for the Ruger LCR .327?
@htnowpro5 күн бұрын
I don't see any in your caliber. Many people asking for one, but couldn't find any.
@stufields51255 күн бұрын
@@htnowpro How can I get in touch with the manufacturers of the laser cartridges. We are getting a 2nd .327 revolver and would dearly like to be able to train with dry fire.....
@htnowpro3 күн бұрын
You can research and contact the company you are interested in. I am guessing the demand is not there, otherwise they would be out on the market. Different line of thought. Get a trigger guard mounted laser and practice dry firing while holding on target. It shows up and movement to the slightest degree. Just a thought. Hope you find something that works for you.
@stufields51253 күн бұрын
@@htnowpro Thanks we've done that but it doesn't show where the bullet would have gone. I think it is a matter of time. The .327 is gaining popularity.
@tzoumaz406 күн бұрын
I have the same, good thing, where can I order repacement-chain?
@htnowpro5 күн бұрын
I have sent a message to DocSmart. Will get back to you when they answer. I found chains on Amazon but not DocSmart branded.
@htnowpro4 күн бұрын
www.amazon.com/gp/product/B0D48WN6BX
@htnowpro4 күн бұрын
www.amazon.com/gp/product/B0D48VK1KL
@rumorscameras6 күн бұрын
So if u have the mattebox u can just swap prompter for mattebox without removing the first stage ....
@htnowpro5 күн бұрын
The splitter glass is permanently attached to the lens shade/matt box. Matt box/lens shade is removable from lens/rail mount/filter assembly. Hope this answers your question.
@Brian.Wyant16 күн бұрын
I don’t have the reset on mine. Not sure what to do now
@htnowpro6 күн бұрын
I don't have any other info. You might call Ryobi and see what they say. Please check back and let us know how it turns out. Thank you for sharing.
@MarineMark6 күн бұрын
I love the light/laser on the P226. Do you know what make/model it is?
@htnowpro6 күн бұрын
I like that laser a lot also. I even put it on my new Notos CRK. It is the Solofish 700. Here is a channel link if you would like to help the channel by using it. It doesn't add to the price. Thank you for watching and commenting. amzn.to/4fVd7xQ
@MHernandez0121719 күн бұрын
How can I turn it off. We have the same refrigerator, and it is also 1.5 yrs old. The ice maker stopped working. We called the protection plan and they said we had to turn it off for 24 hrs to thaw out! No idea how to turn off, other than unplugging it.
@htnowpro9 күн бұрын
To turn off,unplugging is the only thing I think of also. Did you check your app to confirm it is set to on?
@MHernandez0121719 күн бұрын
@@htnowpro Thanks! Will do.
@philwaymire663810 күн бұрын
So to get the alarm to go off you have to hold the door alarm for 3 sec then the ice maker button for 3 seconds and it will clear
@htnowpro9 күн бұрын
Thank you, absolutely correct. Thank you for sharing. I got tripped up by that automatic panel 🔐 lock.
@lindawynell2 күн бұрын
Thank you @philwaymire6638, I too got tripped up on control lock/unlock. Filter light is now off. 😊
@randallgalli578810 күн бұрын
Every one of these releases are junk I’ve installed two on my recliner metal and they are junk after a few months 👎🏻
@htnowpro10 күн бұрын
I had to check my video date. It's almost been 1 yesr and mine are still working several times a day. You may have other mechanical issues. Thank you for sharing your thoughts. Have a wonderful weekend coming up. 🙂
@konstantgus920811 күн бұрын
My battery had 4 leds blinking. After reset i blinked all 4 leds one time, then led 1 and 2, then 1 3times The charger stayed red, piwer on Tried my other battery same charger, the green charging led came on Battery jump unsuccessful. What would help is to know the flash sequence means. 4 leds flash, 1&2 flash 1 time, The led 1 flashed 3 times
@htnowpro10 күн бұрын
Absolutely, it would be great information to have a trouble code chart. Maybe someone can share it with us. Thank you for sharing your thoughts. Have a wonderful weekend coming up.
@carmencastellano857511 күн бұрын
AT WHAT NUMBER DOES IT HAVE TO BE TO BE FULLY CHARGED?
@htnowpro10 күн бұрын
12.6v. Mine used to charge up to 13v.
@amarris_sky6311 күн бұрын
Does it output warm air?
@htnowpro11 күн бұрын
Yes, it does seem slightly warm.
@tengxiong231811 күн бұрын
I connected my galaxy fold and power cable to the monitor which took up both the usbc ports. How do you control the monitor since theres not a usb port for a mouse/keyboard?
@htnowpro11 күн бұрын
Put your phone into mirror mode and use your phone touch screen.
@pierrenj7911 күн бұрын
How do you set it up Mine was installed like 5 hours ago , NO ice or water in the pitcher
@htnowpro11 күн бұрын
Turn it on in the app. No ice for about 24hr.
@robertodldavis12 күн бұрын
Thanks
@htnowpro11 күн бұрын
You are very welcome .
@Moondoggy194112 күн бұрын
No better test is an actual extended power outage. Maybe you could get a magnet and put it next to the container and see if anything sticks.
@htnowpro11 күн бұрын
Yes, it was a very successful 10 day experience. No complaints. Magnet is a great idea....
@donnacarollo252912 күн бұрын
hi, would you happen to know why the smaller ice cubes stopped working on my refrigerator and if so, what can I do to fix it?
@htnowpro11 күн бұрын
Make sure there isn't a small pile of ice in the back, it can detect it and won't drop the new batch. Move the ice forward to have a full tray. Check your app settings.
@omarbrooks686612 күн бұрын
Is it counter depth or standard depth?
@htnowpro11 күн бұрын
Ours is the standard one
@kayaker6213 күн бұрын
Nope. Mi
@htnowpro13 күн бұрын
Thank you for sharing. Sorry it didn't work out for you. Have a great week.
@richardbarclay799813 күн бұрын
Did u ever use the night vision optic in the dark in the video you're making about the night vision optic
@htnowpro13 күн бұрын
Sorry, not yet. I recently purchased a Umarex Notos to mount it on and was scheduled to take a vacation camping trip to a family members 20 acres. Was really looking forward to trying it out and get some good footage. Plans had to be changed and couldn't go. I still hoping to reschedule. I don't have any place here use it. Thank you for asking. I do have some boring footage from here in the house in the dark...lol. I don't think it was interesting enough to post.
@nathangrantham267714 күн бұрын
Rubbish company. Horrible customer service
@htnowpro13 күн бұрын
Please share your experience with us.
@Ex1le012814 күн бұрын
I don’t think it’s beeping when putting in the code would work especially in a situation where someone could be in your house armed and your just giving away where you are to the intruder. I think a light shining around the number you pushed would work better and be more quiet
@htnowpro13 күн бұрын
Thank you for taking the time and making the effort to comment. The beep is mutable. Have a wonderful week 😀.
@Ex1le012813 күн бұрын
@@htnowpro ah I see I didn’t know that. I was clearly wrong you have a good day now
@htnowpro13 күн бұрын
You too.😊
@htnowpro13 күн бұрын
@Ex1le0128 I posted in the long form video but not on the shorts video. Thank you for sharing . It is a great point made. Have a wonderful week.
@Arash_Leopard14 күн бұрын
ehh secure for sure but its gonna take a while to get it out and maybe forever for situations.
@htnowpro14 күн бұрын
Yes, absolutely correct. There are always some advantages and disadvantages in all things in life. Thank you for taking the time and making the effort to share your thoughts. Have a wonderful week 😀.
@dominickp202315 күн бұрын
Worked for me - thank you for posting this!
@htnowpro15 күн бұрын
Wonderful. Thank you so much for sharing your success. Have a great week ahead 😀.
@stockstnt815 күн бұрын
Inside of mine looks completely different!!!! What are thise terminals labeled ,, let me know the circuit
@htnowpro15 күн бұрын
Some batteries are different, newer models and such. I don't have any experience with them yet. My old batteries are still going. Thank you for posting. Please check back and let us know what your research proves out. Thank you.
@GaryStockton15 күн бұрын
I agree with you on the quality, having recently acquired one. One thing that surprized me was how the connector, controller and mount were packed in the bottom of the bag. I didn't notice the additional zipper and had returned my first one, then when the second one arrived I noticed that additional lower zipper. The other teleprompters that have the rings to mount on a lens never seem to work right and the Padcaster I bought from Kickstarter was terrible with poor quality glass. It's nice to have a good quality teleprompter now.
@htnowpro15 күн бұрын
Thank you for taking the time and sharing your experience." It's nice to have a good quality teleprompter now". I completely agree. It's the well thought out design,and build quality for an affordable price point that I really appreciate. Thank you for sharing.
@Midbelleza16 күн бұрын
Wow! Those desserts look amazing 👏
@htnowpro16 күн бұрын
Yes, they were.😀
@toddellis308917 күн бұрын
40V 4ah battery at Home Depot - $140.00. Tamper proof toex set at Harbor Freight - $6. Thank you, thank you, thank you!
@htnowpro17 күн бұрын
You are very welcome. Thank you for taking the time and making the effort to share your success. Have a wonderful weekend 😀.
@gastonrxxxme860920 күн бұрын
Which is the angle vision of the lens? Because the cameras Foscam with big angular has at least 112 grades, and in this camera i dont know
@jameshorton749621 күн бұрын
The question I have is, how did the batteries get into that predicament in the first place? I have two that just did the same thing over this past weekend. One is a 4ah, the other is a 6ah, 40v. I used them both in my Ryobi mower till they they ran out and when I put them on the charger it showed the red/green flashing light. Was it just something that happened or did the mower itself have something to do with it. Plus, I also have an 18v doing the same thing from whatever tool I used it on.
@htnowpro20 күн бұрын
That is the million dollar question. I can only guess, based on my automotive experience. Low voltage can cause electronic modules to go crazy/ freeze/ lockup and even fail. Its possible that whatever algorithm or " software strategy " is programmed as a failsafe, to not allow further use " Hard fault or perceived hard fault is being triggered by a voltage fluctuation or other fault. If the reset works it's the same as performing a control alt delete or reset similar to a computer. Just my guess...I really would like to know also. Thank you for asking. Sorry, I don't have the answer 😔.
@sachmo019621 күн бұрын
Tks for the vid. Works great but... No need to pull off "test pad". Unscrew 4 screws (reg Star bit, sm). Pull back from opposite/end of pad (like book). Took 2 tiny scribes to "rst/other hole", X'd them to each other (met to met) & pushed the "internal" button (what pad hits) &....Victory was upon me, 4 flashing went to one. Took to charger & good to go. Tks again, too simple (Now)😂😊
@htnowpro21 күн бұрын
Thank you for sharing your technique and success 🙌. Have a wonderful week ahead 😊.
@fenwickc227422 күн бұрын
is this good for stargazing ?
@htnowpro21 күн бұрын
No, it's simply a camera with infrared capabilities.
@trimansells23 күн бұрын
Need “security” hex to take off screws.
@htnowpro23 күн бұрын
They don't cost much on Amazon. Some viewers say drill out the center. Some say you can break it off. I prefer using the correct tool.
@TheMickeymental23 күн бұрын
My goodness man get to the stinking point. Don't make videos unless you are qualified, you are not.
@htnowpro23 күн бұрын
Thank you for taking the time to post your thoughts. Have a wonderful weekend 😀.
@TheMickeymental23 күн бұрын
@@htnowpro Do you realize how many times you repeated yourself? It is very unprofessional. Thank you.
@NewyorkMan6624 күн бұрын
What a nice Videos you uploaded! Can we also get Bumper attachment and detachment? I need to repair my Clarity's Bumper and want to know how! I saw the description in honda book but better seeing good understanding person doing the job will be so grateful.
@htnowpro24 күн бұрын
Basically, remove the tail lights, remove the screws from all the edges. Carefully unsnap bumper from body and remove. In the video, you can see the reinstalling of the bumper. Removal is similar.
@NewyorkMan6624 күн бұрын
@@htnowpro Thank you kind sir!
@htnowpro24 күн бұрын
@@NewyorkMan66 you are very welcome. Have a wonderful weekend.
@JoseRuiz-ne5oh25 күн бұрын
It works thanks
@htnowpro25 күн бұрын
You are very welcome. Thank you for sharing your success. Have a great weekend.
@antoniosgarlata518125 күн бұрын
That is very good information if the unit works. Because I was impressed by the design, I purchased two 12000-BTU units, and they worked only for two years. The cause for stopping working according to the code that came up was " loss of refrigerant." I contacted midea customer service, and basically, they told me that there is nothing they can do to help me because the ac unit has one year warranty. Incidentally, the owner's manual indicates that seals, the reason why the refrigerant leaked, have five years warranty. Midea still didn't do anything. Unfortunately, I had to throw both in the garbage since there is no technician willing to work on window units. Good luck with yours.
@htnowpro25 күн бұрын
These are the times that justify extended warranty. I never buy them. In hind sight I wish I had. This unit was a new release. Yours may have been different. Thank you for sharing your experience with us.
@htnowpro25 күн бұрын
I would google it. You might be able to DYI it.
@NewyorkMan6626 күн бұрын
the tennis ball hainging inside the garage is good idea. You know the safe limit of getting inside with it right? :)
@htnowpro25 күн бұрын
The tennis ball was later changed to a laser and a tire stop since putting a metal shelf close to the Clarity.
@NewyorkMan6625 күн бұрын
@@htnowpro truely a hightech person you are!
@guylangenburg122026 күн бұрын
Worked like a charm! I just bought the right bit and saved a ton not having to buy a new battery!!!
@htnowpro26 күн бұрын
Congratulations 👏. Thank you so much for sharing your success. Have a wonderful remainder of the week 😀.
@jk01red26 күн бұрын
Works perfectly thank you! I did NOT have to push the button. Just left the reset circuit connected for a couple of seconds. Also you can break the center stud off on the screw heads and use standard Torx.
@htnowpro26 күн бұрын
Thank you for sharing your success. Have a wonderful week ahead.
@Nsbsvwhwuiwbsv28 күн бұрын
My whole digital screen feels canted clockwise, is that normal just me ?
@htnowpro28 күн бұрын
Mine seems fine. Better contact the manufacturer. They seem to be responsive to customers 🙄 . Please let us know how it turns out.
@Nsbsvwhwuiwbsv28 күн бұрын
Yes I already sent them 2 emails Let's wait and see @@htnowpro
@Lostprovince231928 күн бұрын
Can these batteries be safely ran in series?
@htnowpro27 күн бұрын
I don't have any information on that 😕.
@oscarvaldez859429 күн бұрын
Would anyone happen to know the part number for the ice tray? Need to replace it😢
@htnowpro27 күн бұрын
I don't have any shop, or parts manuals.
@michaelespinoza3782Ай бұрын
So this video is very bad and explains nothing, for the filter to change it u have to twist it to get out then replace it then twist the new one in, and for the filter thing on the side of fridge his did not work in the video because he did not have his settings unlocked under on the last button of the fridge it will say lock 3 seconds and have a picture of a locked lock if you see the lock as locked it will not let you change anything so you have to press and hold where it says lock 3 seconds and then it will make a chime and show an unlocked lock, from there you can go back to the filter reset and press and hold it for 3 seconds to get the red filter indicator off and when u get it off make sure to go back down and relock the settings so nobody can mess with it
@htnowpro27 күн бұрын
At :13 to :19 twist and pull. The only error was not unlocking the panel. The panel will automatically lock.
@donnacarter9808Ай бұрын
Very good info
@htnowproАй бұрын
Thank you for taking the time to comment. I was very surprised that day I couldn't open the trunk, for sure. Have a wonderful weekend.
@Raja_Haroon644Ай бұрын
Sir is this work on Phalai 😅
@htnowproАй бұрын
It works on small branches. I have no information about Phalai.
@Raja_Haroon644Ай бұрын
@@htnowpro Sir please search on google about (phalai) and then tell about this
@GlyxyPlayzАй бұрын
Hows the lectric xp 2.0 holding up?
@htnowproАй бұрын
Great question. The lectric 2.0 has been great. I have 344 miles on it. Have ridden it much lately due to the extremely hot/ high humidity here. But I am extremely pleased with it. No complaints.
@GlyxyPlayzАй бұрын
@@htnowpro that's great thanks for the update
@htnowproАй бұрын
@@GlyxyPlayz you are very welcome. 🙂
@BxCortez2050Ай бұрын
Why would I need this
@htnowproАй бұрын
Great question 🤔. The word "need" qualifies the question, and I don't know your needs. In my case, there was a very severe hurricane called "IAN". We had the possibility of great flooding. Having this could possibly save some ones life, for a mere $120. Just a thought.
@MidbellezaАй бұрын
Great deal! And yes, it comes in handy in case of hurricanes (which we get quite often in Florida!), but I'd also use it for fun. The better question is, why not? 😅 Thank you for sharing!
@htnowproАй бұрын
Yes, absolutely 💯 percent. I am waiting for some nice weather and the canal level to rise. Will definitely be using it for some 😁 fun.