DelmonicoBrownMusic

Пікірлер

@aboutjosie 16 күн бұрын

Love it omd 😋

@themistressofminerals Ай бұрын

Haunting and beautiful! 💜

@TuneTalk-vy9tl Ай бұрын

❤❤❤ excellent 🫶🎶🙏 #keepthemusicplaying

@timflynn2136 8 ай бұрын

His brother John had it after Mike died.

@timflynn2136 8 ай бұрын

RIP Mike

@timflynn2136 8 ай бұрын

Mike was an old friend of mine. Knew him for 45 years.

@timflynn2136 8 ай бұрын

This looks like Mike Dalys old boat in Banana River marina.

@thomasmunstermann7195 11 ай бұрын

VW Bus retten. ❤ tolle Lebensaufgabe. Und VW Käfer nicht vergessen. 😊

@Anashadk Жыл бұрын

Thar boat has been well used, some work to do removing the old through-hulls, but workable.

@terryrayl502 2 жыл бұрын

Just bought one myself. It needs a lot of work but what boat doesn't ;)

@TheRoyalBavarian 2 жыл бұрын

Love to see her better tended to.

@hugobatista2015 3 жыл бұрын

Hello excellent job... Can you tell me what glue you are using to join the boards together, and what glue to glue the skeleton together?

@taissonnunes1743 3 жыл бұрын

what is the name of the spray used at the end?

@ricardofaria6738 3 жыл бұрын

Música horrorosa

@garydflatt4904 4 жыл бұрын

The hull seems to be very well built? Needs a little “Ospho” to kill the rust. Take the boat to the Philippines and finish the whole interior, install a teak decking over epoxy coatings. Good chance to compare the holding ability of the plow anchor compared to the danforth anchor. I’ll bet the danforth wins by a longshot! You know what “Nat Herrishoff” said about plow anchors?

@fatbackfitz 4 жыл бұрын

Brother, you face a lot of the same technical issues as guitar makers. Ya might wanna check out some traditional methods that might save you time trouble and messing with clamps! Very cool product!

@deankoch7305 4 жыл бұрын

is this for sale?

@rnschannel9313 4 жыл бұрын

noice

@fredimendez6242 4 жыл бұрын

desde Guatemala palabra ese si es amor por los Microbuses VW

@phrankie_lewpehz 5 жыл бұрын

Is the fiberglass roll just on the bottom of the board?

@delmonicobrown 5 жыл бұрын

I use one layer of 6oz cloth on each side.

@phrankie_lewpehz 5 жыл бұрын

@@delmonicobrown Thank you so much. About to make my first board. Your video helped. Thank you.

@delmonicobrown 5 жыл бұрын

@@phrankie_lewpehz no problem. You can also email me with any questions if you need. [email protected]

@phrankie_lewpehz 5 жыл бұрын

@@delmonicobrown oh my God. What an honor. I will save this. I'll also send you pictures/progression of the board and look forward to feedback. I've waited over 30yrs to build my first longboard and honored you're willing to share your email. Thank you.

@clintford5315 5 жыл бұрын

This Is fantastic.

@hartoz 5 жыл бұрын

Worst Colvin Gazelle in existance?

@agentnuget 4 жыл бұрын

Why do you say that?

@yepiratesworkshop7997 3 жыл бұрын

Mine might be worse. She's not been tended to since COVID hit.

@dennisleroy1365 5 жыл бұрын

It's sad seeing them that way

@lawrenceledbetter4261 5 жыл бұрын

Mast?

@Imwright720 5 жыл бұрын

It’s interesting in most of the videos I’ve watch building boards they use the poly glue. The glue routinely finishes at the bottom in all the tests. Titebond 3 or that type always finish first. I used the poly on a gate build and it failed within the first 6 months. I redid it with titebond3 and years later it’s still rock solid. This is without a finish covering it. I’m not judging you just making an observation. Beautiful craftsmanship

@mirkordm 5 жыл бұрын

you also need to consider the open and the closed time. it is not a quick glue up.

@marcijunebug 5 жыл бұрын

only thing better than pulling one home...driving one home!!!!❤ great video

@adamvx1531 3 жыл бұрын

Florian George did it with his forest find bus but condition of this bus is much worse. It's very rusty.

@stocksj 5 жыл бұрын

Boat could use some cleaning

@vinfish4697 6 жыл бұрын

do you have to use the fiberglass sheet what would happen if you don't ?

@estanciera58 6 жыл бұрын

hola mi amigo, que tipo de pegamente le pones a las cuadernas o costillas que luego parece poliuretano expandido???

@andreqeen2417 6 жыл бұрын

I will make it myself this week I think. Just got instructions from stodoys and I'm ready for do it :D

@gentibrahushaj2569 5 жыл бұрын

Hey).What kind of wood is best?I am thinking to start one.Thanks)

@wiandridutoit1300 6 жыл бұрын

What did u fill the insde of the board with

@TimelessSurfCompany 6 жыл бұрын

You don't have to fill it with anything as long as you vent it. You can fill it with foam before gluing on the top deck. This dies add weight but lessens the need for venting.

@Freddy-dg7dh 6 жыл бұрын

Where did you get your plans from ?

@TimelessSurfCompany 6 жыл бұрын

www.TimelessSurfCompany.com

@Mikefngarage 6 жыл бұрын

Now let the work begin. OMG that is so much work and so many panels. has good vins though I assume so just get a better panel and make one out of 2.

@octavio604 6 жыл бұрын

Can you put a list of the materials? please

@TimelessSurfCompany 6 жыл бұрын

There is a list of materials and tools needed on www.TimelessSurfCompany.com

@JOEGGGJOE 6 жыл бұрын

Great build. I cringed when you used that polyester resin. That board isn't worthy of that resin. But I can see how you used it for the darker color. Your neighbors must love you with polyester resin smell. Ha.

@briantrend1812 6 жыл бұрын

WOW greatstuff! ive made 40 foam boards never touched wood so I have to make one before I die but I live in UK and locating the right wood and materials is not easy around here but dam this is real inspiration thankyou you did an amazing job. I was thinking you could try glueing on poly foam on the rails a long band then the rails would be easier to shape but I guess its not a full wooden board then.in the UK matrials are well overpriced here

@briantrend1812 6 жыл бұрын

for more bouyancy you could use construction foam spray in to the cavities

@rudisfilms3485 4 жыл бұрын

Brian Trend that would reduce buoyancy compared to having the chamber full of air