Great video Wayne 😊 looks darn cold out there

Guys, Thanks so much for explaining how to put that switch back together. Mine kinda pinged when I took it apart and I couldn’t figure out how it was meant to go back together, it seemed all very counter intuitive to me. My K5.85M is now back up and running after fitting a new capacitor. 👍👍👏

My power button will no stay in position when I follow your step by step. I don’t get it why….

That one block sure looks great, that shingle oh my groover stock right off the shingle machine hey

Nożem to konserwe otwórz 😉

thank you to you two gentleman, best video of a repair, I have ever seen, this was tricky especially refitting the switch, you did a great job.. 10/10

thanks

Did / does your variable speed work in your skid-steer?

Amazing! Simply amazing, you guys are absolutely #1... I have had a problem with my K6.85 and watched all the videos on KZbin. Your video is the only one that solved my problem, like you said, nobody else shows you what to do, properly... Thank you so much, your banter was also very entertaining.

Simple and straightforward. Thank you

Dimana saya bisa membeli switch on/off yg warna merah itu.

Thank you for this video, I had the same problem to put the switch back in place. My solution was a thin wire around the tap that fits into the bearing. Then I just held the wire tight upwards and reassembled the switch without any problem

I agŕee. This was an attempt to use 2 cameras, one of which later became a chore to get recognized by editing software. In addition to that while attempting the picture in picture format I included some double footage which was subsequently left in, probably because I had spent 3 hours on the effort and was tired of it. This might be helpful to anyone with very limited knowledge of this machine. I have made use of some very good youtube repair videos and remain hopefully that this video will be usefully to someone.

Really? This is ridicules!!

Very informative video Wayne, we learn so much from you, thank you :)

Brilliant video Just saved me 400 euros on going out and buying a new one .I had a problem with the switch been out of place .Works perfect .Thank you

Do you have a video on how to replace the high pressure hose on this machine as I'm having difficulty in detaching the hose from the connection located through the hose reel? The hose is split so I need to replace it.

Happy New Year Wayne :) pancakes look amazing, we had apple pancakes today lol, happy you like the eggs and you got a double yolker, can not figure out what hen is laying those lol, we are in for a big storm tonight, cheers :)

Great video Wayne :) everyone loves your fudge, beautiful Christmas display :) and you got a pile of snow

Nice

Awesome Wayne :) sure glad you both enjoyed the pears, I think we are going to try the fried ones :) great video

How’s it going?! Great job on the channel! Have you ever thought of using Promosm to increase your subs??

Wayne, just found you Cuz my '08 2305 has developed a drip in the area above that filter and of course we can't locate it. I recently changed the fluids and filters so thinking I did something wrong!🥺🥴

Thanks you so much for vdo😘😘😘😘

Thank you for this video. Helped me to see the position of the metal V clip. Sorted the problem.

Hi Wayne, great video. There is one part that has me confused though. At 5:30 you mention the rod is tightened to the piston using a #7. But that rod is just part of a spring that pulls out. If you don’t mind, what do you mean you tightened it? Thanks

Ami so me ssle el jabon k tengo k aser para k salga. Solo sale agua a precion Podrias ayudas gracias un saludo

Lol Wayne that is awesome :) thank you

That is awesome Wayne. :) another great informative video :)

Thanks a lot!!! I though I never fix it, Bit I got Thank you!!!

Thanks from sweden that fixt the problem ✅👍

thank You

Great video Wayne, hope you had your steel toed boots on :) lol, you make such informative videos, thanks a bunch

Muchas gracias por enseñaros. Me as resuelto un problema que no podía con ello.👌👍

You have not fixed this. The problem is that the Spill Valve or Unloader Valve has siezed, perhaps you are in a hard water area. You got close to the problem but you bodged it by unscrewing the Black Pin to force the switch into a closed position. The Pin should be returned to be screwed tight into the top of the Spill Valve. At that point of the video you need to remove the Spill Valve, clean any debris/scale from the barrel it sits in (the same barrel you blew the water from) and also de-scale the Spill Valve and check it is working/moving correctly. To get my Spill Valve out I filled the barrel with WD40 (thin oil) and left it overnight. In the morning I removed the Black Pin (so as not to damage it) and replaced with an 7mm bolt, then carefully rotated the valve until it would pull from the barrel. Replace the black pin and clean as described above or replace. In the UK you can use eSpares e.g. www.espares.co.uk/product/es537916/pressure-washer-spill-valve. (for my Karcher 520M) Now reassemble. The way you fixed it causes the violent start and stop of the washer rather than a progressive start, I don't think it will last long. You may also be at risk having forced the power switch to be on having removed the action of the spill valve. I have no connection with eSpares or Karcher, I just like understanding how to fix stuff.

You have not fixed this. The problem is that the Spill Valve or Unloader Valve has siezed, perhaps you are in a hard water area. You got close to the problem but you bodged it by unscrewing the Black Pin to force the switch into a closed position. The Pin should be returned to be screwed tight into the top of the Spill Valve. At that point of the video you need to remove the Spill Valve, clean any debris/scale from the barrel it sits in (the same barrel you blew the water from) and also de-scale the Spill Valve and check it is working/moving correctly. To get my Spill Valve out I filled the barrel with WD40 (thin oil) and left it overnight. In the morning I removed the Black Pin (so as not to damage it) and replaced with an 7mm bolt, then carefully rotated the valve until it would pull from the barrel. Replace the black pin and clean as described above or replace. In the UK you can use eSpares e.g. www.espares.co.uk/product/es537916/pressure-washer-spill-valve. (for my Karcher 520M) Now reassemble. The way you fixed it causes the violent start and stop of the washer rather than a progressive start, I don't think it will last long. You may also be at risk having forced the power switch to be on having removed the action of the spill valve. I have no connection with eSpares or Karcher, I just like understanding how to fix stuff.

Yes and although it was a long video sometimes it helps to see everthing if you are a novice repair person.

Congratulations on being the only repairmen to actually show HOW to access the unloader valve. It was the unloader valve that you tightened, right?

Did you get it straightened out? I recently bought a 2005 JD 2305 W/345 hrs. It works perfect, except my mid pto won't engage.. I can turn it freely w/my hand. Thanks

That is awesome Wayne, loved the video, looks like you all had a great time :)

did a 1537 have a brake too?

does the hydraulic fluid that lubes the chain have a cross from side to side? I see there are two fills... just curious. am buying one (1537) and seller says he does not fill one side.... now I worry if there is no cross over that one side is very low on lube... if any in it

That is an awesome video Wayne, Micky is an amazing pup, you have done such a great job with her and it shows, fun playing with this new to us format hey :)

Cool, neat looking bees, I remember the lady bug poem, paperboy story is sad, great looking blue berry bushes, this is an awesome video Wayne like your squash plants

Great video Wayne, hopefully that works, thank you for your video :)

How much for the jeep? Great content btw.

Sup bro

That is awesome, great series and it works great

You are a handy man for sure Wayne, but I am totally lost on fixing something like a pressure washer, great video

Yep, I’ve lost my appetite. I’m 30% on my way to no teeth and on waiting list for my dentures. :/