repairing karcher pressure washer part2 of 3

how to repair karcher pressure washer shuts off at low pressure

[@Sveaisland]

Brilliant video Just saved me 400 euros on going out and buying a new one .I had a problem with the switch been out of place .Works perfect .Thank you

[@andym.6141]

Guys, Thanks so much for explaining how to put that switch back together. Mine kinda pinged when I took it apart and I couldn’t figure out how it was meant to go back together, it seemed all very counter intuitive to me. My K5.85M is now back up and running after fitting a new capacitor. 👍👍👏

[@danny_mills]

Amazing! Simply amazing, you guys are absolutely #1... I have had a problem with my K6.85 and watched all the videos on KZbin. Your video is the only one that solved my problem, like you said, nobody else shows you what to do, properly... Thank you so much, your banter was also very entertaining.

[@DawnohopeBridge]

thank you to you two gentleman, best video of a repair, I have ever seen, this was tricky especially refitting the switch, you did a great job.. 10/10

[@stefanjohansson2605]

Thank you for this video, I had the same problem to put the switch back in place. My solution was a thin wire around the tap that fits into the bearing. Then I just held the wire tight upwards and reassembled the switch without any problem

[@LarsaGasGas]

My power switch did not work. But I was unable to understand how to mount the spring. But your video help me to put back the power switch correct. And now it wors perfect. Many thanks. Larsa

[@moonrich3492]

Congratulations on being the only repairmen to actually show HOW to access the unloader valve. It was the unloader valve that you tightened, right?

[@slemaneyakamlondon886]

Thanks you so much for vdo😘😘😘😘

[@siefertfelix8343]

Thanks a lot!!! I though I never fix it, Bit I got Thank you!!!

[@georgepatron8337]

Hi Wayne, great video. There is one part that has me confused though. At 5:30 you mention the rod is tightened to the piston using a #7. But that rod is just part of a spring that pulls out. If you don’t mind, what do you mean you tightened it? Thanks

[@JosesGarage101]

My power button will no stay in position when I follow your step by step. I don’t get it why….

[@piotrpakula3089]

Nożem to konserwe otwórz 😉

[@muhammadghirid5007]

Dimana saya bisa membeli switch on/off yg warna merah itu.

[@chopone2]

Yes and although it was a long video sometimes it helps to see everthing if you are a novice repair person.

[@الاستاذولدسعيد]

thanks

[@ukasztyminski8029]

thank You

[@MauroMBRocha]

hank You