How to Use a Planer Sled

Learn how to use a planer sled. In this video, I will show you exactly how to use a planer sled for a thickness planer. A planer sled enables a thickness planer to face joint boards. I will detail every step I take to flatten lumber with my planer sled. I will share with you how you can build a simple planer sled to flatten lumber in your shop. I will also explain my custom planer sled and if you are interested in the design see the links below on how to make it! I really hope you enjoy this video, take care.
How to Build a Very Accurate Planer Sled for Face Jointing: • Planer Sled - Free Dow...
Hey everyone, I wanted to provide the community with a document that details the measurements and steps to build this specific planer sled. I really hope these plans along with this project video provides you with everything you need to complete this project! drive.google.c...
#woodworkingjig #planer #woodworkingtip
I have many more woodworking videos on my channel so don't forget to swing over to the Shopfix channel page to check more videos out! If you enjoyed this DIY woodworking video don't forget to smash that like button! If you want more DIY woodworking videos feel free to subscribe to the Shopfix channel, thanks so much!
/ @_shopfix - YT
Find More Woodworking Videos on my Channel Page : / @_shopfix
Want to join the Shopfix Community and receive updates on future projects? I'll be posting new Shopfix uploads and, of course, woodworking plans, Tips, Tricks and how to woodworking tutorials for your next DIY project.
Subscribe to our KZbin Channel : / @_shopfix
Shopfix, it's for the love of woodworking!

[@jamesgoodrich8355]

I watch a lot of KZbin video on woodworking. This is the best video I have seen on how to get a flat surface to start from to get the remainder of the the piece of wood flat and square to work with for project material. ABSOLUTELY FANTASTIC VIDEO.

[@_Shopfix]

You’re very welcome! I wish you the best of luck on your future projects, and thank you for supporting the channel!

Hello my friend, This is the second time I calmly watched the use of a planer slide. Because I needed it too. I like this technique. good job. Thank you for sharing. You're not here for a long time. I hope everything is okay. See you. Stay healthy and happy. Big greetings...

[@_Shopfix]

Thank you! I appreciate the comment and wish you luck on your future projects!

@@_Shopfix 👍🤝

[@antonioperez1624]

William, I saw the plans to build the sled. Two things I noticed that I would do different: use plywood instead of pine wood. You don’t want any warping of those pieces. Second: springs? I wouldn’t use them because what you need is a fixed, stable reference point. If you use springs you can’t accomplish that.

[@_Shopfix]

Plywood could certainly be substituted for the pine wood, however for the specifications for this design make sure you have enough thickness in the sled to drill all of the holes and to house the dowels and bolts. The springs are actually essential for the design. I tried the sled out without the springs and the vibrations of the thickness planer rattled out the bolts. The spring helps the bolt stay in place after you adjust the height. The planer sled is fixed, the springs simply help stabilize the bolt and have no effect on the sled. I hope that makes sense!

[@skippylippy547]

Nice video!

[@bazanderson8283]

genius idea to use dowel/springs instead of faffing with shims, good job man, thanks for sharing 🙏 ps i may plan to use this idea but its for squaring smaller boards that are around 4ft in length approximately 4inches wide, they are usually cupped, would it therefore be better to space the dowels closer together, instead of 7inches to say 3 or 4?

[@_Shopfix]

Thanks it worked much better than I had even planned! If you are going to go through the process of building one I’d stick pretty close to the original plans. When deciding where to place the dowels remember that you are likely going to use the sled on other boards than the dimensions of the lumber you have in mind right now. So make sure to build it with potential future projects in mind as well!

[@jamesmccartney7638]

Question I have is 1 side of planar is 3/4" the other side 5/8" how do I correct this

[@_Shopfix]

I’m not sure what exactly you’re asking…

[@UltimaSRi]

Nice sled!! But only in imp. not metric😢

[@mwinner101]

Where’d you go William?

[@_Shopfix]

I’m coming back don’t you worry!

[@mwinner101]

@@_Shopfix Okay. Just checking.