(015) Install Radiator/Oil Cooler Guards: 21-24

[@cantwheelie525]

Awesome video man. Thanks for taking the time!!

[@NINJAof1]

You're welcome.

[@nickbetts2244]

Ive just fitted the same guards. Your video helped a lot but what a painful job compared to other guards ive fitted. I did fit the rubbers to the back of the guards just to provide more support in the event of something hitting the guard. I didnt reinstall the sponge fairing support as without the bracket it seemed difficult. Cheers again for the video, very helpful. It has to be said the official fitting instructions are really poor. 👍

[@NINJAof1]

I very much appreciate the comment. Getting the Radiator Guard pinched between the left and right outer core was tight, but doing a dry fit did help with molding it into a curve. I used 2 Zip Ties on the Foam cushion, wrapping one tie through the existing hole at the top of the cushion and making a new hole at the bottom. I cover this in the video at 20:33, just in case you want to put it on. I agree on the Evo-Tech Performance install guide being non-existent. But the guards look "Fantastic." If you're doing anything else, make sure you take a look at the Modifications Instructions. I just uploaded it this week. This should help along with the videos. Thanks again!

[@nickbetts2244]

@NINJAof1 will do thanks 👍

[@joras18]

Hello Chris. I wanted to ask your opinion on a set of guards I saw on Amazon. While I’d love to buy these ones you have installed, they are a bit pricey at $132. The ones on Amazon go for $75. I wanted to ask what would you do in my case. And what might be some pros and cons with the set from Amazon. Thank you in advance.

[@NINJAof1]

Five factors that are important are quality of material, fitment, functionality, and looks. Price is usually the last thing I'm factoring in when I make a purchase. If the price of the part matches my factor preferences, then it's a win for me. Usually, prices are high when those factors are met or exceed your expectations. I've learned over time, If you go with the less expensive ones, you're going to probably have to modify something, either the part or your bike in the best case scenario. Worst case scenario, the part won't fit at all. I would always recommend going with a known vendor that has a sound history with manufacturing parts. I like the Evo-tech Performance radiator and oil cooler guards because of the precise fitment, quality of the part, the way it looks, and the fact I can remove and replace it without fear of damage when cleaning the bike. Side note: I purchased a cheap radiator guard on Amazon for the 14, and it was of very poor quality and fitment. I wanted something to protect it while on the track. You would never notice the issues unless you were up close. It served its purpose, but it is definitely not something I will keep long term. BLUF: Purchase the one that will serve the purpose long term. Hope that helps.

[@joras18]

Which rubber caps are you referring to here 14:50

[@NINJAof1]

In the video titled '(002) The Preparation Stage' at time mark 8:38, I show the parts for the radiator guard, which includes 6 small skinny black caps, 13 small round plugs and 2 small screws. The 6 small skinny caps are slid onto 6 small cutouts located on the left and right sides of the radiator guard. These caps prevent any metal-to-metal contact with the radiator, thereby reducing the potential for rattle. The 13 small plugs are inserted into holes on the backside of the radiator guard. NOTE these holes are a different shape than the majority of the holes, which are hexagon in shape. These plugs prevent the main face of the guard from pressing into the radiator cooling fins. The two small screws mount the radiator and oil cooler guards together as shown in the video you are referencing. I only used the 6 small skinny caps when mounting the guards. I did not notice any contact with the main face of the radiator guard and the radiator cooling fins, so I decided not to install them. These plugs may provide additional protection if you hit a large rock. I believe this would spread the impact across the guard, thus resulting in less damage. Hope that answers your question. Leave a like. Thank you