#0164

We're back with another review and today we're looking at the In Win 301 mATX chassis.
You can find this case for $98AUD at - www.umart.com.a...
Follow us on Facebook for the latest up to date content - / ggflanparty

[@NedRigNerd]

does anyone ever pay attention to the manufacturer themselves. all reviews on this case complains about the side venting. when in win never said it was for intake and if you bother to go to their website you would notice the suggest that the bottom be used for intake and back and front fans be used for exhausting. but yet not one reviewer has mentioned this...

[@AllisonRoadWest]

John Tha Vapster +1 - I own this case and you are 100% correct. Cooling is quite good.

[@bunce888]

can you fit a H55 under the GPU? Im thinking of buying one and doing it as a future upgrade

[@coltinlaplante7400]

With this in mind would I be able to put a 2 fan rad in the bottom with slim.fans? Or just put it upfront blowing out?

[@MultiGile2]

@@AllisonRoadWest is it good for air cooling?

[@Juani2392]

@@MultiGile2 i have the same question, i purchased one.. anybody know if cud i use with air cooling¿

[@GroundGame.]

if we remove or modify the SSD tray un the upper front to be removed can one make a 280mm rad work?

[@aarix1]

The arctic is an inspiring build.. As a fan of small form factor builds this case is perfect. Loved the review, well done.

[@rynz_2893]

Omg it's so tiny! I ordered this for a friend and it'll be coming in the mail tomorrow. I did go ahead and make sure all of his parts are going to fit. I like that a micro atx mobo uses all of the space in this case like in the video example. I think that looks so nice. For once his case won't dwarf his board. It's so perfect. My big concern is his one system fan header and limited air flow here. I'll be using molex cables to power all the fans on this build with 7v resistors. Super pumped, thanks for the video

[@billyperdana4242]

i just finished building my pc in this case love the looks hate the cable management

[@zaccorpseman7366]

Glass side panel switch broke, won't budge when trying to open it. Considering smashing it

[@brooklynforge4591]

the side is for exhaust, intake is from the bottom. Why its filtered

[@studog858585]

Brooklyn TheFurry nope

[@brooklynforge4591]

Inwin airflow diagrams even show the side is for exhaust and cool air from the bottom is how the case is designed.

[@studog858585]

Does that mean it's right? no

[@brooklynforge4591]

I would say it means its right if that's how Inwin shows that it was designed. Since they you know made the case.....

[@rtiid22]

What water cooling system is installed in the build?

[@frikkiedelport9903]

Hey man I love this build it looks super clean! I was wondering what reservoir that was? been seeing it a lot lately and would be keen to get my hands on one :) Cheers!

[@DManfrommanila]

side panel opening, i thought is was for exhaust not intake?

[@notboy_]

it definitely is for exhaust, I don't know why so many techtubers have missed this since it's clearly demonstrated on newegg's product pages and Inwin's own site

[@DManfrommanila]

Zak Gambrell or it is a bad design by inwin?

[@bitcoin4624]

Its a cheap build for cheap people.

[@Umbryphos]

There's actually 3 spots you can mount the ssd 2 on the bottom of the tray one ontop of the tray.

[@jveasey2243]

Hi, do you plan on adding a video of the mods you made on this case? Specifically the water-cooling parts in the top next to the PSU? Thanks

[@saltyliciousss]

how do you use the bracket support

[@peterreisberger150]

Hi, do you think there would be enough space if I put one radiator in the bottom and another one in the front and both ones with fans on it?

[@lennartmeinke8861]

So you can install a 240 rad at the front where there isn't an intake?

[@GoopgaGaming]

how did you mount the gpu bracket support bar i cant figure it out.

[@bradleylappin6107]

He said u can't watercool 2 GPUs but you could use noctua low profile fans for the bottom rad

[@elijahignacio]

I am actually more concerned about the airflow, so you basically have 4 intake fans and 1 exhaust? Is that alright? and doesnt the front intake will collect dust?specially in the cables

[@dev.lockridge]

Elijah Ignacio you could probably use the bottom as an intake, the front as an exhaust and the back for either one

[@louiev9862]

its suppose to be two intakes at the bottom and exhaust at the back and front as stated in their website.

[@bmcginnis6543]

I wish you would have shown the build more....

[@alanmartin4378]

love your videos, keep up the good work :)

[@BAdventures]

Good detailed review 👍

[@speedburger5410]

Any way to mount a 2nd HDD in this?

[@szabaripeti98]

Buy a 2.5inch hdd.

[@22joek]

how are the temps?

[@krazypandaman]

doesn't really look like there's space for a res without drilling though

[@farru_19]

man love ur videos

[@rogierx]

This is not small at all: you can take off 50mm in all three dimensions and everything would still fit ...

[@vertekz433]

Can i put h81m on this case

[@masonchappell8983]

if its micro atx... the chipset has nothing to do with case compatibility lol

[@wnstj15951]

I've built my new gaming rig because I have no computer to play game instead of workstation. I had hard time putting all parts in that shit, including 240 rad(fractal design celsius), msi 1080 gaming x, and intel i7 7700k. unfortunately, i failed to put all my parts in LoL.. 1080 was too big, and also 240 rad was so big too. So I used coolermaster seidon 120 instead of the fractal design 240 one. Gorgeous looking but that's all. Shitty case for high-end gaming pc because of the lack of space.

[@rcstringers]

watercooled build! :)

[@natha7367]

support ATX psu or SFX?

[@4-0-K]

full atx

[@epicenter713]

Regular ATX.

[@natha7367]

Thanks

[@epicenter713]

'Welk.

[@dilano.a6866]

wow that's my dream pc right there

[@aliananza1990]

cheap my ass :/ the cheapest seller on amazon to ireland is 115 pounds for this case

[@gG-jg8bv]

radiaaaator

[@JeReMyIsMeNoTyOu]

"Welcome back to another..." what??

[@hallsurround]

the psu cant breathe

[@jment34]

Nice case but the price is very high.

[@menioskas6032]

first

[@FlipoosX]

Hello. Give me a gaming laptop. I'm from Russia. It's very expensive and hard to make money on a computer. My past computer was burnt. With love from Russia =)

[@epicenter713]

Who burned your previous computer?

[@FlipoosX]

Deven Gallo it was burned by my wife. that I would not play a lot of time.

[@1700tt]

which one is better 303, 301 or phanteks tg?

[@laiks5485]

Phanteks TG is probably the best choice, but if you want to be original the 303, 301 or 101 will be better choices, imo they also look better but that is personal preference.