02 FORD F250 | REAR DOOR DONT OPEN | EASY FIX

[@osbornebay944]

Thank you Sir, very clear words and good camera angles. My 2004 F250 right small door bottom latch fails, ordered 8 tips for complete repair. Your vid is very helpful.

[@OurCabinInThewoods]

Glad it helped

[@SawyerStephens-x9e]

Can you post the links for the parts you ordered

[@2005StangMan]

You absolute genius! I need to get my rear doors open, and I didn't even think about taking the latches loose instead of trying to get the frickin cables to do the work while the doors are shut!

[@dgadver]

Great video!!!!! very useful as both of my crew cab doors don't open!!! Thank you!!!!!

[@OurCabinInThewoods]

Glad it helped!

[@philliposborne619]

Thank God I watched this video first and it saved me a lot of time and money . This is the only video that directs you to the dorman repair kit that worked like a charm

[@OurCabinInThewoods]

Cool glad it helped you out. Thanks for the comment

[@davethompson9277]

Thanks for the video. All the vendors state that the Dorman 926-111 kit will not fit my 2007 F-250 superduty extended cab, but it fit my truck just fine, and was very easy to install.

[@OurCabinInThewoods]

Thanks for the info and glad it all went good.

[@2_be_determined]

One hell of a good job you did explaining this. Great job filming aswell. Much appreciated.

[@OurCabinInThewoods]

Glad it was helpful!

[@MA.CUTLER]

This is the only video I found that actually shows a genius way of fixing this. All other vids I've seen have you replacing the entire cable Assembly.. this guy saved me a bunch of money and hassles! Thanks bro 👍🏽👍🏽

[@OurCabinInThewoods]

Glad it helped

[@brandywithbob2446]

Appreciate all the camera work in such a tight area. Really helped.

[@OurCabinInThewoods]

Cool glad it helped you out thanks for watching

[@ifroggyifroggy]

i've watched a few of these now - this one is the BEST.... had some bad camera work early on but, super camera work for within the panel locking attachment. for my needs, 2008 ford super duty - THIS ONE helped the most. especially about the remove the top lock bracket first - to open the door. thanks

[@OurCabinInThewoods]

Im glad it helped

[@abby9991]

You are awesome. Thank you for taking the time to do this, and for the excellent camera work. Just outstanding. Exactly what we need ed.

[@OurCabinInThewoods]

@@abby9991 I'm glad it helps

[@gregleonard7391]

What a great video. Good job explaining everything.

[@OurCabinInThewoods]

Glad it was helpful!

[@williammoore5081]

Thank you very much for this video, it really helped out. Had both rear doors fail within a month of each other.

[@OurCabinInThewoods]

NP

[@johnmoore6617]

Both of the back doors on my 2000 F-250 Super Duty had this problem. Thanks for showing how to repair it!

[@OurCabinInThewoods]

You're welcome!

[@RIPdreams]

Thank you for showing the actual box of the repair part, much appreciated!

[@OurCabinInThewoods]

Cool glad I can help

[@glcoulson]

Well thank you sir, well described. The only video showing the repair ends and the fix. My 2006 doors failed within 2 weeks of each other.

[@OurCabinInThewoods]

@@glcoulson thanks for watching.

[@williamcarballo6658]

Good teacher

[@OurCabinInThewoods]

Thank you! 😃

[@williamcarballo6658]

In my case just the cable going up is bad I think can I fix with cable brake bicicle i will try that’s another idea

[@OurCabinInThewoods]

@@williamcarballo6658 good luck

[@williamcarballo6658]

Can you explain how open de mirror f250 99 left and right side

[@brianemerson6689]

Excellent instructions. I just repaired mine using your ivideo.

[@OurCabinInThewoods]

Good deal

[@waynemazzola9443]

Excellent Video none of the others showed how to repair the actual cable end with the repair kit and thanks for making the effort to get your camera inside the door and showing how to seat the upper cable in the U shaped saddle, KEEP UP THE GOOD WORK!!!!! One more thing I found out is that you have to replace the cones on BOTH ends of each cable this requires 2 X- 926-111 kits which gives you 8 ends to replace with new metal ones, When you remove the top latch I suggest you use a string to lower the latch inside the door to an area where you can work on it.

[@OurCabinInThewoods]

Very welcome

[@LAZYDAYZAHEAD]

Thanks for the tutorial. Good to know. 🇨🇱

[@OurCabinInThewoods]

No problem 👍

[@1fly2fly24]

In the door views were very, very helpfull. Thank you.

[@OurCabinInThewoods]

Glad it was helpful!

[@treeofliberty4407]

Very great video! You done us half door guys a service! Thank you much!

[@OurCabinInThewoods]

Thanks for watching.

[@FrankAndTinaOfficial]

Great instructional video Tony! I really needed this one!

[@icesawman4275]

thank you! much needed info for truck i just bought.

[@OurCabinInThewoods]

@icesawman4275 I'm glad it helps . Thanks for watching.

[@1fly2fly24]

I am getting ready to do this exact job and had watched another video but the guy was outside after dark with lights. Love the view that you gave iside the door, very helpfull.

[@OurCabinInThewoods]

Glad i could help

[@williamparker6649]

Thank you so much I have a jammed door right now!

[@OurCabinInThewoods]

Glad I could help!

[@jhonatanmartinez8292]

Baught my first truck at 17 2008 f250 extended cab for 3k, just fixed the ac and thank you for showing me how to fix my doors😎

[@OurCabinInThewoods]

Thanks ang good luck

[@MarcoGarcia-xz3di]

thanks for the great video keep up the good work made working on my F250 door a heck of a lot easier

[@OurCabinInThewoods]

Thank you glad I could help.

[@dgadver]

Be careful not to strip the torx bolts!!!!!!! Great video... couldn't have done it without this video!!!

[@OurCabinInThewoods]

Glad the video helped

[@Mudog486]

Hey I had the exact same problem. Just wanted to say thank you this helped me out a lot!

[@OurCabinInThewoods]

Glad it helped!

[@GabrielSkelton]

Very helpful. Thank you Sir.

[@OurCabinInThewoods]

@@GabrielSkelton glad it helps

[@JamesonRutfordPhD]

One hell of video Sir.

[@OurCabinInThewoods]

Glad it helped. Thanks for watching

[@fernandomartinez2086]

Nice video.. Very detailed... Seen 3 other videos on how take care of the fix.. Yours was the best... 100

[@OurCabinInThewoods]

Thank you and thanks for watching.

[@jakesperko1120]

Extremely helpful, thank you sir

[@OurCabinInThewoods]

Most welcome!

[@FrankAndTinaOfficial]

All of my Ford Van's cables go bad. I Need a bunch of those!

[@OurCabinInThewoods]

ya it easy fix

[@dalah4053]

Excellent at explaining. Thank you!

[@OurCabinInThewoods]

You're very welcome!

[@robstuckey]

great video. super helpful. very nice job showing how to fix this

[@OurCabinInThewoods]

Glad it helped you out. Have a great day.

[@stevesurwila7477]

Very helpful I didn’t have a clue where to start I hope it’s as easy as you make it look wish me luck

[@OurCabinInThewoods]

👍

[@brianpasco6097]

This was fantastic!! This will solve the problem I have on both suicide doors

[@OurCabinInThewoods]

Good thanks for watching

[@PreparednessVeteran]

Aaah Doors! I did a van conversion and removing panels is like a reverse engineering project. It's pretty amazing how they make and put some of those components together. Good job.

[@rosariocentral1986]

This is the best explanation thank you

[@OurCabinInThewoods]

You're very welcome!

[@jessewells8945]

Thank you for posting!

[@OurCabinInThewoods]

Our pleasure!

[@2011mendo]

Never saw any other video where they removed that upper bracket... smart idea, thanks... yeah, I'm alarmed guy as well.

[@OurCabinInThewoods]

Glad it helped thanks for watching

[@2011mendo]

@@OurCabinInThewoods welp did it today.. both doors were inop. Couldn't do it the way you did as I have NO access to that top bracket. Didn't help that m in Tampa area and it's blasting hot... 2 A/C break, 1 jump in pool break, and I'm done... then a long pool break!!!

[@wannwarriors]

having the same issue, thanks!

[@OurCabinInThewoods]

Good lock

[@RogerThornton-j6i]

Thank you sir save me a lot of money good video

[@OurCabinInThewoods]

Glad I could help

[@spitfirered]

Watching Tony, going to retire up at 2:00 am to get Hubby off to work! Oh, First!

[@johnnyeason7200]

Excellent 👍👌

[@OurCabinInThewoods]

@@johnnyeason7200 glad it helped

[@Dan-g2t]

Great video. Thank you

[@OurCabinInThewoods]

👍

[@jodieriches486]

Thank you, from Australia

[@OurCabinInThewoods]

You're welcome!

[@jodieriches486]

@OurCabinInThewoods we watched your video thougherly and started attacking our door as per your directions and our problem is as exactly as you said. We've ordered the parts and will get it sorted. It's hard to get help here in Australia for F Trucks, so glad we found your video. We will be following you and be in contact for more tips as they arise. Happy Monday to you all.

[@OurCabinInThewoods]

@@jodieriches486 no problem glad I could help

[@donnvall9256]

Good info and great cam work! I bet this is why my fUrd doors won't open. Damn, i miss the 60s/70s cars when things were simpler. Almost every problem we have now, you have to watch a damn video to fix it!!

[@OurCabinInThewoods]

Yeah I agree the good oldies were the best. Good luck you'll fix your doors.

[@cosmiccultivators]

You made this so simple I could do it and trust me I know nothing about vehicles😅😂🤣✌💗 happiness

[@OurCabinInThewoods]

You can do it!

[@bdubya7607]

Each end of both cables needs an aluminum cone, with that odd one (round with a flat side) going to the top lock mechanism. Make sure that the plastic cable (with the metal core) “bottoms out” near the end of the aluminum cone - not somewhere in the middle - just like you stated. Those plastic holders with the yellow catches can also be released with a small, 5/16” socket (with a lot a wiggling) or, more easily, with small to medium needle nose pliers squeezing the two “ears” & pushing the holder free. Your way works better for people either larger fingers. Very good video !

[@OurCabinInThewoods]

Thanks for watching great comments

[@FREEDOMREDBIRD]

Good job! That was easy enough!

[@OurCabinInThewoods]

Thanks!

[@nativepride101]

Thanks. Mine are broken up top. This helps

[@OurCabinInThewoods]

Glad I could help

[@timsollers1790]

Great info, I have same issues going on

[@OurCabinInThewoods]

Good luck and mine is working just fine still.

[@southernburns1]

Silicone spray helps to slide the metal ends on to the cable

[@OurCabinInThewoods]

Great info thanks

[@JorgeTorres-lj6dt]

Thank you sir

[@OurCabinInThewoods]

You're welcome, glad it helped.

[@URBANGRANDPAPREPPER]

this is great information Tony

[@ckdd8891]

Thank you.

[@OurCabinInThewoods]

You're welcome!

[@mikeelfers9304]

Ok this was 2 years ago - but do you remember what size the torx bolts were? Thought that they were size 40 - however I managed to strip both torx heads.

[@OurCabinInThewoods]

I think it was a T40. If the head is stripped out hit the face of it a few times with a hammer and retry again.

[@harviechilders8834]

Great video! Thanks!

[@OurCabinInThewoods]

your welcome

[@harviechilders8834]

@@OurCabinInThewoods Just got both of my doors fixed. Thanks again for the great video.

[@JohnW1711stock]

Great! Thanks.

[@OurCabinInThewoods]

Yes good luck

[@c1rtraining408]

Good Stuff

[@OurCabinInThewoods]

Appreciate it

[@lsizemo]

Thank you!

[@OurCabinInThewoods]

Yup know problem Good luck

[@lsizemo]

I tried to put Amazon link to the parts! KZbin deleted them...oh well. I'm excited as I have two trucks with these problems! Hopefully I can figure it out. Parts were like $6 for 4 of the pieces needed. 56% lower than normal! Got two packs coming! Thanks again

[@lsizemo]

@@OurCabinInThewoods thanks man!

[@lsizemo]

Not sure why the other videos want you to replace the cables!

[@OurCabinInThewoods]

@@lsizemo I don't know but this fixes the problem and mine still work great.

[@noecampos1359]

Is more hard when is broken. The lash in the bottom. Hatd to open. But a i did. Thanhs for the part number

[@OurCabinInThewoods]

Your welcome

[@thomastarter1839]

Great video! The detail you showed on the clips is especially helpful. Do you recall what size Torx bit those two upper latch screws are?

[@OurCabinInThewoods]

Sorry i really don't my be 45-50T. i'm glad it help you. Thanks for watching

[@thomastarter1839]

@@OurCabinInThewoods No worries. Turns out it is T40. I have the exact same problem where both the top and bottom holders are broken! It's like your video was made just for me!! LOL. I'll be doing the other door too as a preemptive strike. Again, thanks for making it easy to follow and understand.

[@nancymarie4463]

I was thinking when you said you was doing to replace the one cable why not replace both ...then you said the other was broker ,at least you don't have to go back in there . I always l ike your videos,even tho I won't be don't any of what you do on your channel I still enjoying it

[@OurCabinInThewoods]

Thanks for watching

[@johnturner4128]

OK, thanks. Just purchased the 4 chrome cable stops. Three of the 4 were round at the top and the fourth was not. Should it have been 2 round and 2 not round?

[@OurCabinInThewoods]

Should be 2 and 2. I pinned a comment about where they go I miss spoke. It's the top comment.

[@johnturner4128]

@@OurCabinInThewoods Thanks. Going to return them to autozone.

[@johnturner4128]

And pick up a T40 to remove the door latch.

[@johnturner4128]

OK, I run into a problem. As can seen from the attached picture they sell the cable stops in a package. There are 3 large diameter stops and 1 modified. See picture. Which 2 go to which door? Thanks in advance 3:40

[@johnturner4128]

Can’t attach picture.

[@davidstallworth4800]

HOW DID YOU GET THE PLASTIC PIECE ON THE ROOF OFF SO YOU CAN TAKE THE LATCH OFF AT THE TOP?

[@OurCabinInThewoods]

It just pulls down use a screw driver good luck

[@aaronbadgett4439]

where did you get those metal ends for the cable?

[@OurCabinInThewoods]

Autozone part is Dorman 926-111. I showed the box in the video. thanks for watching

[@aaronbadgett4439]

@@OurCabinInThewoods thank you!!

[@russellhelms5436]

Having the same problem, but, rear doors won’t open, I might just get two boxes of the Doorman clips and do both sides of the cable on both doors so I won’t have to deal with it anymore

[@OurCabinInThewoods]

Glad it helped

[@noecampos1359]

Thats the easy way.

[@OurCabinInThewoods]

Good

[@makinmusikpro]

Just what I needed! Got a 2000 f 250 I’m fixing up and the back door won’t open. I tried to do the work while in the back seat and just no way while it’s over 100 degrees! Going to go get the kit to do it right.

[@OurCabinInThewoods]

Cool thanks for watching

[@duanenichols2703]

You all show same video but my problem is cable is broke and and can not really get to bottom latch and drop down seat is in the way

[@OurCabinInThewoods]

Im a big guy and some times i would take out the front seat to give me room to work on the rear doors closed. But i did find this for you good luck. kzbin.info/www/bejne/qYjJiJt4oNaWhbssi=liudlOp_U91TafLv

[@duanenichols2703]

Front seat not the problem , its the back bench as it does not move . I picked up a 14 inch 90 degree pic that I believe will work. Thanks for the reply.

[@714thegooch]

The second cable end piece you put on is in the wrong place and will eventually fall off. I'm not sure how it stayed there in the first place. The kit came with 4 pcs. if you had replaced all 4 like you should have you would know exactly where the odd shaped one went.

[@OurCabinInThewoods]

Thanks for the info

[@phyl1283]

Difficult photography that doesn't always show what is being talked about. Overall, a pretty well done video. I can use it when I have to. The doors on my 2001 350 are getting stodgy, so I will do it before it becomes a harder fix to do than if I wait until later. Thanks for your help with this annoying problem.

[@OurCabinInThewoods]

Thanks for watching

[@BigJsgarage]

Please don't take this as I am trying to be a know-it-all. I watched your video a few times actually. and at 13:33 seconds you discover that one of them is shaped differently than the rest. So I went and did some looking for the parts because I have the same trouble with my 2004. and I found that odd part you should have used on the other end of the cable up by the bottom of the top latch. If you click on this link.i.ebayimg.com/images/g/qdgAAOSw9NdXtK7x/s-l1600.jpg . You will see that end was made to be used on the bottom of the top latch.It is cut that way because it's the only way you can get it into the bottom of the top latch is to have those sides cut off.I am glad I watched your video because I am a big guy like you.I was going to try and remove all the trim from the inside of the door while standing outside of the truck.

[@markdavidson281]

Thank you!

[@OurCabinInThewoods]

@markdavidson281 I'm glad it helps, and thanks for watching.