028 - Everything Attachments Brush Hog Gearbox Hood | LX2610 | Woods BrushBull

[@danielrapoza8468]

Hi Chris, Excellent mod at a very good price too. Thanks for sharing. The paint job looks great . It is a great design. Very nice find for your brush hog. With all your work you now have a great attachment at a low cost investment and some sweat equity. 👍 Dan

[@watershedoverlook]

Thanks Dan! I've got one more trinket laying around to add on and then I think I'm done (until I paint it). Headed out this weekend to pick up ANOTHER used attachment. It's a sickness I tell you, a sickness!

[@danielrapoza8468]

@@watershedoverlook No, no, you are just working very hard to provide great content for your channel. Keep up the great work. Hey, I sent you an email, requesting your help. Dan

[@watershedoverlook]

Lol Dan! Email reply sent. 👍😎

[@tractortalkwithgary1271]

Such a simple little design yet so effective. Someone was using their head.

[@watershedoverlook]

Right?!?! 👍😎

[@noelstractors-firewood57]

That’s a great idea. EA make good attachments for sure. I watch their videos of their products. Have a great day Chris.

[@watershedoverlook]

Thanks for watching Noel, and I agree. I haven't found any complaints about my box blade and I really do think this guard is a great solution to the issues associated with the "flower pots"!

[@MyClutteredGarage]

Nicely done, Chris! Love the reference video clips and the multiple camera angles. Very fancy. 👍😄

[@watershedoverlook]

Lol...fancy is the last term I'd use, Ed, but thanks for the kind words! 👍❤️😎

[@jeremysecrest7553]

Thank you for mentioning that Everything Attachments are USA Made! Great video!

[@watershedoverlook]

No problem Jeremy, thanks for watching! 👍😎

[@gusswenson7811]

Good evening Chris. That looks like a great product. Have to put that in my idea file cabinet. Thank you for sharing your knowledge and experience’s with us. Stay stay safe and always be kind. Cheers

[@watershedoverlook]

Thanks for watching and the kind words Gus!

[@GardenTractorBoy]

I really like that gearbox guard, it is a great design and very clever.

[@watershedoverlook]

I agree Joseph! Thanks for watching. 👍 😎

[@GPOutdoors]

Pretty handy and helpful Chris! thanks for sharing the mod and the install. Will help a lot of folks for sure. Have a great weekend out there!

[@watershedoverlook]

Thanks Gord, you as well!

[@TheMindfulHomestead]

This is almost an entirely new rotary cutter! Great video, even if it's an EA attachment. 🤣

[@watershedoverlook]

Thanks Jack.

[@gregorymacneil2836]

$89 is a bargain - EA is a great organization - Love my pallet forks!

[@twinbrookacres]

That is a brilliant design. I am sure that will he a popular item.

[@watershedoverlook]

Thanks for watching! 👍😎

[@MJADoingStuff]

Great video Chris 😁I am glad to see that cover on there. looks great add now you are safe. Thanks for the video😁👍🚜💨☀

[@watershedoverlook]

Thanks Mitch, I'm happy to have it there too! Have a great weekend. 👍 😎

[@MannistoCay]

Definitely a nice piece of kit! Nicely done Chris, great job with the video. 🌴🍻🚜🇺🇸🇨🇦

[@watershedoverlook]

Thanks for watching...stay warm up there...Spring is coming!!! 👍😎

[@shonhaines1995]

That was certainly well worth it at that price point. Tnaks for the video, great content.

[@watershedoverlook]

Thanks for watching! 👍

[@khtractors]

Nice guard! Looks good and functional. I have a very bad habit of just removing guards. Take care!

[@watershedoverlook]

Thanks Ben. I don't think you're the only one! Have a great weekend!

[@OrangeismyNewGreen]

Definitely much better like you said compared to the other ones you showed, great choice Chris 👍🏻, humm 🤔 what’s the next item 🤔, chains all around the edge? Have a great weekend Chris 👍🏻🙂🙋🏼‍♂️🥃🇨🇦🇺🇸

[@watershedoverlook]

Well now that you suggest it....🤔🤔🤔 😉😆

[@OldIronAcres]

Nice video. Very well put together!

[@DIYMyWay]

Hi Chris! Hmmm… I might have to get one of these! Great video! Thanks for sharing!

[@watershedoverlook]

Thanks Martin, it seems like a pretty elegant solution to a real aggravation!

[@Malpeque_Bay_LX3310]

Nice mod. Once i get my tiller out of storage i'm going to see if one of those guards will fit it.

[@watershedoverlook]

Thank for watching Stephen! 👍😎

[@wildbill23c]

The gearbox on my roto-tiller has a plastic guard around it, held in place by 4 bolts....a socket an 8-10 inch extension and a ratchet makes quick work of removing the cover...you'd think after all these years of building PTO implements these manufacturers could figure out how to build guards LOL. With my tiller it has the slip clutch on it, so releasing the PTO shaft pulls the whole assembly off the tiller and I can adjust the slip clutch, and hit the grease zerks on the U-Joints all at the same time. I think whatever PTO implements I end up with in the future I'll install a slip clutch on them, they're expensive, but I think a better alternative to shear bolts that inevitably break at the most inopportune time, and with luck you don't have any with you when it does break LOL.

[@watershedoverlook]

Thanks for watching William. I think this guard will be especially helpful when there is a slip clutch installed. (Hold that thought...😉👍)

[@MASI_forging]

Great video. 🙂🙂

[@thegreatnorthwoodswithbb2863]

Last brush mower I had... The guard look similar to that. It just flipped up...

[@watershedoverlook]

I believe some Bush Hog brand guards hinge up.

[@chriselliott2364]

That's a real good price for that guard!

[@watershedoverlook]

Thanks Chris...I thought so too! SO much easier than the "flower pots"! 😎👍

[@chriselliott2364]

It looked good too!

[@watershedoverlook]

@@chriselliott2364 LOL...I'm taking credit, as I'm sure it's due to that EXCELLENT rattle-can paint job! 😉🤣👍😎

[@johnmasker3581]

Love it Chris, great product, did you put a link?

[@watershedoverlook]

Yes, it's in the video description. It's the first link you see, and it also appears again in the full list of links at the bottom. Thanks for watching! 👍😎

[@mr.redneck2715]

I have the same brushbull and need a new gearbox, would you please share with me The gearbox you used and where you got it and how many horsepower the gearbox is?

[@watershedoverlook]

It's a 45 hp gearbox. There is a link in the description of video #027. Good luck! 👍

[@RCAFpolarexpress]

Good Evening Sir 👍👌😇Outstanding Gard Safety 👌👍😇Have a Nice TGIF Sir You Need a Red light in the back Sir Cheers 🤭👍👌😇🍻

[@watershedoverlook]

Thanks for watching Dave. I hope you have a great Friday as well. I am going to spend mine trying to deduce what I need a red light for! 😉🤔👍😎

[@mikeneeley1836]

How does the LX2610 handle that brush Bull. I have an LX2610 and am debating a 48” or 60” and want to be able to cut 2” saplings.

[@watershedoverlook]

Hey Mike, thanks for watching. I've had zero issues running the 60" with the LX2610, although admittedly, I have only cut tall grass and brush. My gut feeling is that as long as you take your time and you're not trying to cut thick groves of 2" stuff, I imagine the 60" is the ticket.

[@benkanobe7500]

Excellent. I will be purchasing one. (The link is broken).

[@watershedoverlook]

FYI, I love my EA products, however they have recently been having some financial issues related to some legal battles. They went completely dark and silent for about six months and have only recently popped back up and started posting again. You may want to give them a couple of months to make sure they are up and running, or at least confirm they have COMPLETED product to ship before ordering. Also, I did hear they were about to launch a new website...that's likely why the link no longer works.

[@frankwrogg2515]

Did the pto shaft need to be cut?

[@watershedoverlook]

It did not. I would need to remeasure if I was using it without the Quick Hitch, but if I remember correctly, I was still good then too. Thanks for watching. 👍 😎

[@thegreatnorthwoodswithbb2863]

Or could always just take the guard off and leave it off just don't put your hands in there.. don't know why anybody would anyway why it's moving 👍

[@watershedoverlook]

I expect there's a significant number of folks who subscribe to that school of thought. Thanks for watching.

[@HuserHelpers]

Slippy Clutchy

[@watershedoverlook]

Someone is paying attention...😉👍

[@exodipus]

Does anybody else make something similar? EA is more or less out of business right now. Maybe they’ll be back if their legal issues get resolved, but who knows if or when that’ll be.

[@watershedoverlook]

Yeah, the EA situation is a real bummer. A lot of folks left without jobs in a pretty small town. I seem to recall seeing something vaguely similar...maybe in another KZbin video, but I have searched online and have had no luck finding it again. I think it was an OEM part on a different brand rotary cutter, but I can't be sure. Sorry I can't be more help.