03-00025 Dismantling set, Volvo/Renault/DAF floating brake disc

[@nadiroksuz4745]

Güzel sistem fren diski zarar görmeden çıkıyor 👍💯💯💯👑🇹🇷

[@falkirk8413]

Step1 remove hub Step 2 use air hammer with hammer bit on all disc bolt heads to break rust bond Step3 Use impact gun on low to shock the rust in the bolt threads with lost of mec oil Step 4 Remove disc ring retaining bolts Undoubtedly 1 or more with snap on older hubs Step5 Weld a washer onto the broken bolts hammer it while still glowing red then weld and nut to the washer and remove the broken bolt Step6 Use 9" grinder to split the disc Step7 Hit the disc with a 14lb sledge hammer to remove disc from hub. Step8 Needle gun the shit out of the hub disk mount area clean and reassemble.

[@CosgroveNotts]

Never had rear daf discs come off that easy. First all bolt heads snap off. Then chuck the lot away and fit new hubs and discs.

[@300400500d]

you can use an air hammer with a socket adaptor to vibrate the bolts loose. we do that in the workshop all the time, sometimes you may need a smaller socket and force it on the bolt but it's a 99% succes rate with our daf's.

[@taxibirtfx3]

@@300400500d do you have a link to the socket adapter for your air hammer, please

[@300400500d]

@@taxibirtfx3 www.amazon.com/Mayhew-37316-2-Inch-Pneumatic-Breaker/dp/B008M23A6Y?th=1&psc=1 this is closest what i could find. We also use one with 3/8 socket. It works amazing and with a lot of different jobs as well

[@taxibirtfx3]

Thank you

[@michaeltoft6440]

cut the disc 4 places with 9 inch angle grinder and hit it with a sledgehammer

[@deanporteous7803]

CHAMPION

[@kitchbatroo]

What is this piece of equipment called please?

[@WallmekAB]

Brake disc/rotor press Volvo, Mack, Renault and DAF. As easy as it looks! We manufacture and sell this and many other tools worldwide, send me a mail and i will assist you. [e-mail]