How Ship Plates Become Millions of Nails: A Complete Manufacturing Process

[@benjamindover4033]

The learning curve for avoiding the “hot snakes of iron” must be pretty steep!

[@genedunlap8384]

Will motivate you to become a fast learner

[@ChristLink-Channel]

You are only allowed one mistake...

[@NavyVet4955]

Didn't see one pair of safety sandals in the foundry.

[@davidkim4083]

Naw the learning curve for those who can do it is flat, but there's just some survivorship bias

[@redblue40rc33]

Saying.,.IM TIED UP AT WORK is an understatement

[@alfastur6833]

<a href="#" class="seekto" data-time="1225">20:25</a> They not only recycle old ships into nails. They recycle old Heineken packages into nails boxes as well.

[@Благополучнытекоторыенедожилид]

20:25 от пива коробки, у них ни чего не выбрасывают. 😮

[@dougaltolan3017]

Seeing how the company has its printing on the other side, I guess that the cardboard comes from a failed Heineken print run, or perhaps excess stock.

[@0tedaCecapS]

Interesting that they have beer boxes in a Islamic country?!

[@tomaiger]

all this work drinking first the beer to get these packages^^ bet for drinking they hiring christians? ;-)

[@John-c4r1o]

There's an imam out the back drinking as much beer as possible 😂

[@jlpjlp1953]

I've done a fair amount of hard work in my life, but nothing like this. My hat is off to some hard-working people.

[@ВанькаИванов-ш4ш]

this is not hard work, this is slavery

[@thinkforyourself2109]

and imagine it operating the furnace in Pakistan's heat!

[@stusue9733]

@@ВанькаИванов-ш4ш I'm not sure you know what that word means.

[@prinz10ga]

Totally uneducated and have no awareness of anything different in the world. Don’t educate the poor population and keep the ‘slave…. Cheap labor’ forces going…generation after generation. 😢😢😢

[@prinz10ga]

@@thinkforyourself2109very true……..now another reality….Pakistan is a Nuclear Armed Nation.

[@DanSulyma]

Makes me appreciate how good I have it, thanks to all those who have fought for workers rights and safety over the years here in North America.

[@xomox5316]

Thank the engineers that designed better equipment and automation.

[@d_theguy]

@@xomox5316 absolutely right! An efficient economy precedes all of that.

[@kidkique]

Workers safety in America has made manufacturing prices go so high now we get all of our stuff from these guys

[@coolcoolercoolest212]

Wait, does that mean that the economy doesn’t work unless people are in dangerous and unhealthy conditions?

[@Iconoclasher]

@@coolcoolercoolest212 No. I'm a retired machinist and I used to work for a company in America that made electrical connectors. I built and designed machines for assembly and inspection of those connectors. They would go so far overboard on safety it was ridiculous. Sometimes it would more than double the cost of the machines that we were building in-house. It's one thing to prevent an inattentive operator from accidentally hurting themselves or somebody else accidentally hurting themselves on the machine, but their philosophy was "we don't want anyone to get hurt even if they deliberately try to get hurt". ( think of how much an automobile would cost if they had to design the thing in such a way that nobody could possibly get hurt with the thing no matter how hard they tried) No common sense. 🙄

[@ErloBrown1]

No one searched for this video, yet here we all are.

[@T-dx8dn]

I searched "Is pakistanium a lower grade steel than chinesium?", and here I am.

[@SohelMulla-cz1ys]

​@@T-dx8dn ok

[@bastiaan7777777]

I love the guy's jeans at 10:41 Hey and on other pocket...

[@claudethibaudeau2714]

I don't care about what anyone says against these people. They work extremely hard and with little to no safety equipment for hours a day, and let's not discuss salaries. I've worked in the steel industry for all of my life, and it's not easy work. I have respect for those men and anyone else who has to work this way. Although I didn't like seeing kids working

[@noahbudie6852]

I respect the workers immensely. I absolutely abhor the corporate moguls who subject them to this kind of dangerous work without proper equipment, and for hiring children to do the work. We fought hard in this country to abolish child labor.

[@paulconetta2264]

You didn't watch till the end! I saw two children boxing nails! I guess it's ok though there was one adult supervising! WTF!

[@dougaltolan3017]

The definition of "kid" is a cultural thing. Those aren't kids to them. They are capable of doing the work, why deny them a wage?

[@noahbudie6852]

@@dougaltolan3017 the definition of children is not a cultural term. I can guarantee that their culture does not see those children as adults. Child labor is not a good thing , and should not be encouraged anywhere, not even in Arkansas.

[@Brandongoheen-f3y]

They are prisoners

[@clist9406]

Always wear your safety flip flops when working with heavy metal plates

[@ChristLink-Channel]

And your skin-tight heat-proof gloves!

[@dasiro]

and your corona-mask, wouldn't wanna catch a nasty cold now would ya

[@SurlyRider2019]

Especially around sharp objects

[@Nichole-Kerr]

It’s the safety regulation they have too😂

[@davidwallace7283]

😂

[@TheDeanza7]

The noise, the deafening sound of the machines, the dirt, the toxic fumes, the risk of quashing a foot, a hand or get caught into these prewar machines....finishing with kids packing the nails....this is a NIGHTMARE !!!

[@RenzitoARG]

But we need cheap nails bro. In my country, Argentina, a US hourly "minimum wage" as burger flipper serve as a 12 day shift payment. This is, for the same cost of upkeeping a McDonalds employee at the northern hemisphere for a day (8 hours), you get a southamerican laborer working for 8 days in 12 hour shifts, or 12 days for 8 hours if you don't want to burn the employee out. I am aware that there's even worse places. And this video shows me one. C'mon, here we get work shoes instead of crocs reinforced with a cutout tincan made at home.

[@InservioLetum]

You have some incredibly tame nightmares, young man. Metalwork at this scale is always noisy, and if you're worried about a little dust, you should probably stay indoors with your ozone-sterilising humidifier and a hypoallergenic blankey. Maybe a body guard -- outside of course; these people have dirty fingernails -- to halt any cooties that get ideas about breaching your quarantine.

[@coolcoolercoolest212]

Oh, well as long as I can get cheap nails I guess it’s ok that other people get hurt.

[@randyearles1634]

its this or nothing. Its hard work but what else is there. Everyone has to make a living, no welfare there.

[@rizwansoomro3275]

@@randyearles1634 "Welfare"? am sure i learn something about this word when i was in school. sounds strange to us.

[@ekbanjosworld4926]

I had a shitty job once. In a rubber seal and silicone mfg plant. Everything was hotter than hell and would burn you. Fumes everywhere and it stank. Was still no where near as bad as these conditions! My hats off to these workers! My prayers go forward!

[@BorderKeeper]

I remember working in a tube factory during high school and due to the cooling milky liquid, grease, and all the iron filings I smelled like Iron no matter how many showers I took. Me and my family just accepted the fact and that there is nothing you can do about it. Thankfully I am now an office monkey now, although I miss that place.

[@bravodelta3083]

Crikey, it's like a Mad-Max foundry. These people deserve much more...

[@chrishultgren777]

they had a functional society until they tried to copy the west

[@darknes7800]

Third world is third world.......

[@BasedF-15Pilot]

The reason why no one breaks down ships is because of labor costs. Literally requires slave labor to make the profit from the recycle.

[@WillLightfoot]

Imagine if they had to smelt their own steel though? They're starting this process with the most difficult part already done for them. Not to shabby.

[@erics7712]

What do you think the mills looked like here in 1890. No flops but death defying work. I can tell you one thing. No cake in the break room for Marge in accountings birthday

[@sandrap6224]

This was the factories in Birmingham England were like 200 years ago. Full credit to the work force from the UK 🇬🇧

[@hetrodoxlysonov-wh9oo]

They're the same machines, they were sent to Pakistan and India after they were removed from old factories here.

[@sandrap6224]

@@hetrodoxlysonov-wh9oo I guess as much as

[@charlesstockford6003]

This was the US a hundred years ago. Cheap labor.

[@gregorymalchuk272]

It was like this in the West until 80 to 100 years ago.

[@tobystewart4403]

It's been all downhill since then.

[@EelingStudios]

It seems that the tiniest slip could cripple any one of these guys for life. Real grafters, hats off to them.

[@velenceigabor1418]

I saw the part, where they cut these pieces from the whole ships. On that yard on average, one worker dies every week.

[@Sapioso]

Mf was playing hopscotch with lava snakes 😂

[@drewwhy5541]

They got the safety sandals on , they good.

[@jasonloveday1192]

Plenty more candidates waiting outside the factory gate

[@packapunchburger]

You'd think they'd have enough off cuts there to make some kind of lifting jig out of an old lifting hoist or trolley jack surely or anything to lift the load up a bit higher than your ankles

[@theflyinghamster8442]

As a tradie I thought my job was hard ! Heck these guys a tough working like that all day 6 days a week ! Total respect !!!

[@Exnay777]

I worked in metals for 47 years from steelmaking to rolling and cold drawing, from smelting to foundry and forging, heat treating and wireforming to 4-slide machines. This is the absolute best video that I have viewed covering this many steps. The rolling mill was a stunner and it got the job done! And handling those coils with no gloves... And I have seen some horrific accidents, especially in the mill. That guy that got his foot out of the way in time was very lucky! I've seen the result when you don't get out of the way in time - a trip to the hospital with a rod through your leg and the skin and bone badly burnt! These videos don't show you that part...but in all, great workmanship with what they have to work with.

[@йййр-й9ш]

Тебе мужик надо отдыхать, а ты про свою работу смотришь😅

[@GavCritchley]

The first part had so many potential life changing hazards I almost had to look away. The guys man handling the big plates near the shear, then the loose clothing near the belt drive. The poor guys near the foundary and then the chaps in the rolling mill.

[@crashandburngaming5103]

And no real protective gear. It’s probably way over 100Degrees there.

[@crashandburngaming5103]

Child labour should be banned there.

[@tbssic1]

⁠And the family would starve.

[@dcelectric6689]

Every vehicle within a square mile of this factory has had a nail in its tire 🛞

[@NostalgiaforInfinity]

In ITS tire, not "their" tire. Are you afraid of misgendering a tire?

[@Reality_watcher]

😂

[@Superimperator]

every man within 10 miles of this facility will have lost at least one leg for failing the game of “Hot Steel Roling”....

[@Sp1der44]

It's wild how much wire comes from those heated billets after swaging / pulling them through all of those sizing dies! Ship hull steel is typically pretty good quality and I should think that would translate to excellent nails. Looks like they had enough raw materials to make about a bazillion more! Watching that gigantic scissor press cutting 1" plates was pretty amazing too. Great video! 👍

[@cmsracing]

I don't think any of the ships I was on hand hull plating that thick after all the years a sea!

[@Sp1der44]

@@cmsracing Those plates do look like they were in pretty good shape - during the whole lockdown thing they salvaged a bunch of cruise ships - perhaps it's coming from one of those (it is painted white like cruise ships) 🤔

[@flamingfrancis]

For the record, plate material would typically be around 0.20% Carbon whereas the steels used for plain Carbon nails are softer and typically around 0.10% Carbon or less. Lots of nails these days are madde from stainless steels which might be more expensive but last forever.

[@fookutube501]

The way that steel cutter cut those sheet,thats brute force and its awesome

[@Mudjimba23AT]

No place for fingers 😅

[@Jacob-de-Veroveraar]

In Japan they did this with Karate.

[@443DM]

ok, the kid using a nail to break off the piece of tape and then use the nail to "save" the next starting point... I finally learned something to start doing in my own life in these videos.

[@mbf9690]

Mesmerizing film. I’m 62 now and recently retired. I realize more and more every day how lucky I was to grow up in an upper- middle class suburban neighborhood in Pittsburgh. But I don’t feel guilty about it.

[@xomox5316]

you should not your people built the advanced society work smart not hard, there is nothing to fill guilty about

[@chapiit08]

Final product seems ok and all from recycled material even repurposed beer cartons for the small boxes, got to give them a thumbs up.

[@APARAT79]

Thumbs up??? Those are underage children packing those nails in boxes!

[@railgap]

That's high tensile steel in those plates they started with. Perfectly fine for making nails. Recycling is fine if you have a choice. These fellows are lower caste, they don't get many choices.

[@josslaypeg3884]

They could invite some high-caste guys to come and inspect their work and get them to accidentally stand in the wrong place. That’s a choice they could make. They made that sort of choice in China and now they’re so far ahead of India it’s just embarrassing. At least the Indians have them all classified in advance should they ever grow enough balls to “do the needful”.

[@cobbvd]

This product is probably then sold by European businessmen as Made in EU...

[@chapiit08]

@@railgap In fact, hull plate is regular carbon steel perfect for making nails as the last drawing hardens the metal to a certain extent.

[@davidwilken3584]

Looks like a steel company out of MAD MAX.

[@bayareaartist999]

Looks like a steel company that made the wire for a majority of suspension bridges like the golden gate bridge.

[@hedunlap]

No wonder so many of them choose to go work in scam call centers to rip off Americans.

[@flamingfrancis]

@@bayareaartist999 Definitely not. At that time the bridge wire was made from steels made to a Standard for wire and not some scrap steel made for a totally different purpose

[@iFixJunk]

Looks like how the First World manufactured things during the Industrial Revolution.

[@wesleymccravy901]

These guys are beasts. Never fight someone who has core strength like these people

[@tbssic1]

They are doing what 1st world countries did 100 years ago. They are no more special than the people who came before them.

[@TheDeanza7]

Why would you want to fight them ? Go fight for better working conditions, more safety, social security, healthcare. These are fights worth to be picked up. These guys here had no choice but to pick up jobs like these to make a living.

[@marteck319]

I have watched many of these Pakistan make something from what most of Europe and USA would consider scrap. Very hot and hard labor and the workers skill never ceases to impress me. What really surprises me is the absolute lack of station to station hand carts trolleys or bins. Operator of a machine will work from a pile and toss his finished work into another pile. That pile is scooped up by hand and moved to another machine and pile. On and on. But the finished product usually impresses me.

[@El_Chompo]

No patch of ground too small, no machines too old, no problem unsolved, these guys can setup a tiny factory anywhere they go and start producing on a huge scale. Amazing.

[@grando234]

and kinda sad

[@El_Chompo]

@@grando234 I don't know, they seem alright, there's a lot of depressed people in america working in offices or fast food places. It would be interesting to talk to them and see if they really were sad at all, I bet they are ok.

[@NicholasPittman-n4k]

respect is not enough for these brave and hard-working souls God bless them

[@benyomovod6904]

Allah bless them all

[@nicodesmidt4034]

@@benyomovod6904if God/Allah was such a great force, why do these kids still have to work in abject poverty???

[@kingy002]

@@nicodesmidt4034 You are wasting your breath on these vacuous fools!

[@MrOrangeonion]

@@benyomovod6904 Allah blesses nobody. Only leads to damnation with him being the "Greatest deciever*

[@MrOrangeonion]

@@nicodesmidt4034 Think, Think Godly, Think above. Try to know, Do it long enough, and youll know the answer. Might take years. Or just Read what God says.

[@rodeleon2875]

"Hi honey how was your day?" "I worked all day in HELL wearing pajamas and flip flops, how do you THINK my fucking day was?"

[@Fangman123789]

"My coworker, Mohammed, got bag tagged by a red hot metal whip woman!"

[@bendover9411]

😂

[@Gertrude1930]

😂😂

[@Rambleon444]

Male privilege. : D

[@FGMR98]

I worked for national nails when I left school in Brisbane Australia and these guys do most jobs the same but on a smaller less safe scale

[@NewBlacksmithGirl]

Interesting topic! But I can't help but wonder, is the mass production of nails contributing to environmental issues? 🤔 Would love to hear different perspectives on this.

[@BarniRepairs]

It's recycling. This is how recycling works... even the packaging is recycled beer cardboard

[@bobbygene8274]

I think their primary concern is eating. It is surprising how fast your "don't care" comes up, when you can't eat. Who cares if the animals have it better than they do. Don't worry, though the environment always wins. It may take a minute, though.

[@lesliegee42069]

I can't help but wonder if women contribute to anything besides a warm hole to plow, or if they simply exist to try and make things more difficult.

[@bastiaan7777777]

Nobody there cares about environment.

[@stevene.5699]

BEAUTIFUL 😍, THANK YOU ! 😘

[@ElliHarper]

All that ancient British machinery STILL working, wow..

[@JeffBilkins]

It'll probably outlast everyone and chug along forever.

[@TruthLoversKoSALAM-fg8dh]

When these machines were new, 100 years ago during the industrial revolution these were only used to wage wars and conquest, not nation building but pillaging other nations.. War planes were made by the dozens everyday and so was forging steel for artillery! This is the legacy of the western nations. Whereas we still import these 1900s machines today for nation building, working conditions may seem poor but not for long, these nails will make millions of furniture articles for home and office use and those offices will soon produce bright ideas and progress our nation further! Todays technology is more accessible thanks to China, we have not only fabrication capacity but 3-4-5 axis cnc milling/turning machines, cnc engravers, wood routers and engravers, laser engravers and laser cutting, water jet facilities, chrome/plating facilities, all made independently through immense efforts..

[@1bigfin]

@@TruthLoversKoSALAM-fg8dh You are correct! They conquered everyone with these machines. They fed their lust for nail guns to wipe everyone out.

[@seamusphelan228]

Yes well built stuff.

[@seamusphelan228]

Aaaaa BOLLOKZ. 😮 leave it out. Every empire had greatness and the warmongers within them used every bit of technology to develop weapons to destroy whatever the positive achievements their assumed enemies had developed.

[@Kempy13]

meanwhile, in the USA, i ask my nephew to mow the lawn, and he starts crying. ... it's a riding lawnmower.

[@dennisestradda9746]

Perhaps it should stop over populating and creating this mess for themselves because of cheap cheap labor

[@Kempy13]

@@dennisestradda9746 perhaps, dennis, perhaps

[@dennisestradda9746]

@@Kempy13 I’ve noticed this about Asia, cutthroat competition due to over population

[@Shelorygod]

He's 2 years old... It's loud and scary!

[@redacted5937]

You're right. All kids should work in these kinds of factories.

[@duaneayers6117]

That's crazy to see just how far one slither piece of steel can go. A lot of hot & hard work goes into making nails. Great Job 👍🏼

[@diysolutionsandhowtos5108]

I heard somewhere that one ounce of gold can be stretched to wrap around the earth I don't remember how many times

[@20chocsaday]

Lift up a pound of nails and try to imagine it as one block of iron.

[@jacquespage3839]

Aside from the safety sandals and the thought this is a scene directly taken out of a Mad Max movie, I raise my hat to these guys. They are efficient and they work harder than anyone else I know. I dare everyone to do better than them.

[@randyearles1634]

yes, its hard but honest labor!

[@ronblack7870]

almost all had boots . only 2 i saw with sandals and the one at the start looked like he had steel over them. they do have those for protection.

[@FrisianKiwi]

I grew up in a construction family. Nails were bought and used all the time. But until just now, I had never realized just how much effort went into producing those nails. Thank you for sharing this, I've gained new respect for those making them.

[@20chocsaday]

I was shown the inside of the Kali nail works. A white painted building except at the back. That was where iron rods, coils and some rolled thin plates were stored. Inside there was an overhead traveling crane to move heavy stuff about over the black floor. It was dark and very noisy. The process seemed to be to draw out a rod through a die, then onto another drawing until it was the required thickness. As far as I could see it was a continuous process, each die would be slightly smaller and the iron would pass more quickly. This could have given them coils to use if that was what they wanted but I don't know. Eventually the iron would pass a die of the required thickness, and be moving quickly, whereupon it would be cut to length and given the end. I was told that around 1920 the die was made of cast iron. Naturally it wore and had to be reshaped and resized often. Then hardened again. Although I knew two of the people who worked there I didn't know anything about how much they produced.

[@winterhorse290]

I’ll NEVER take a nail for granted again!😳

[@theobster]

Blimey that tough work!! Next time I think I’m having a hard day I’ll think of these boys! Bet there been a few lost toes in that place!!!

[@Duh6666666]

Incredibly hard work made harder by the abysmal lack of workplace ergonomy.

[@artszabo1015]

For those of us that are not GREEK - "ergonomy" is not really a word, but it means roughly 'work law' in English. So I don't know what this poor guy is trying to say. I think he is trying to use college words to look smart but he doesn't know what those words actually mean. He wants respect but only gets pity. Art from Ohio PS" Before you argue - "ergonomy" is not in the dictionary. Next time just use ordinary ENGLISH.

[@tjm3900]

​@artszabo1015 I understand what he means. "Stuff to make the job easier." You also make it clear YOU are a pretentious C#nt

[@chapiit08]

@@artszabo1015 Let's say that the conditions observed in the video would shock Mr. Frederick W. Taylor.

[@artszabo1015]

@@chapiit08 I don't think he would be shocked at all. You people are shocked because you have lived very soft and sheltered lives and you consider your life to be the standard for the world. When you compare the lives of the men in this video to the life of a hamster it is alarming. The big difference between these guys and what I have seen with my own eyes is that we had workbenches but fewer fans. If you little boys had to work places where I have worked you would lay on the floor and cry like a baby until your Mommy came to take you home. Art from Ohio

[@chapiit08]

@@artszabo1015 Ok rough man, you really are "tha" rough man. What do you know about ME? you conceited nitwig. Go back to your cave. And by the way I am from the so called "third world" and have seen and worked under less than convenient conditions and traveled the world as well You are nothing but a narcissistic caveman, lol!

[@Palsrible]

Got the kids working packing boxes. Amazing. Good job boys.

[@blipblip88]

Fascinating, Hellish, back-breaking work!

[@bigcatauna]

this video really nailed it 🤣

[@ruslans8033]

Я работал на гвоздильном станке, и вырабатывал тонны гвоздей разного размера. Это был мой первый бизнес в 1995 оду :) Мы сразу покупали катушки с готовой проволокой. И мы закаляли гвозди в металлургической печи, иначе они оставались мягкие и легко гнулись под ударом молотка.

[@WillLightfoot]

That's odd because you normally want your nails to be mild steel so they will deform. Is why you don't use drywall screws for construction purposes, they are very hard, and so sharp and will screw through stuff without the heads twisting off, but because they are hardened, they will snap under certain conditions. If wood is too hard to hammer a mild steel nail through you need to predrill or learn better accuracy in hammering.

[@Billy-burner]

​@@WillLightfootjust be quiet.

[@WillLightfoot]

@@Billy-burner take your own advice.

[@Billy-burner]

@@WillLightfoot 🤐

[@stephmaccormick3195]

Love the safety sandals.

[@artszabo1015]

There are literally hundreds of videos like this and in every single one there is at least one or many more "DORKS" like you saying "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" "safety sandals" FOR THE LOVE OF MIKE WILL YOU ALL PLEASE STFU!!!! Art from Ohio

[@hruehl]

Best comment!

[@MrSpiffilicious]

I came 🏃🏾‍♂️ 🏃🏾‍♂️ for this comment 😂😂😂😂😂!!!! Like, wtf! Really

[@ruslans8033]

+20 metall scills, and +5 fire resiste 🤣

[@artszabo1015]

Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals Safety sandals When are you pussy bastards going to be tired of saying that over and over? They are grown men and they have worn sandals for a thousand years they don't need your Mommy ass watching over them. Art from Ohio

[@george5776]

Where is OSHA ? 😢 this is truly remarkable to watch. I always wondered how nails are made. Can any American mansion doing this job and day out? Hats Off to these folks.

[@Onelesstraveledby]

Nice footage! Thank you for the upload. All the best from Canada!

[@stephmaccormick3195]

Industrial revolution: The early years.

[@mikeedwards1768]

might stay that way for a while

[@millardmoore479]

I love recycling material for other uses . I think you guys should build a roller system to the shear . Might save a back .

[@flamingfrancis]

This is a VERY inefficient method of recycling that steel. The labour factor is the only thing keeping it operational.

[@Brocuzgodlocdunfamdogson]

The use of recycled Heineken boxes is awesome. Not even being sarcastic. Who cares what’s printed on it, it works.

[@oldswede9307]

Very hard working dedicated folks. Hats off to them

[@rsage_]

The shot at around <a href="#" class="seekto" data-time="490">8:10</a> looks like some scene restored to from the 1900s. Beautiful camera angle, lighting, and composition. Cinema quality.

[@poptop76]

It's amazing what they can make with scrap steel , love these types of videos

[@neduzaaduzen1408]

Didn't you see the child labor at the end? Do you love that too

[@zteaxon7787]

​@@neduzaaduzen1408 16 year olds work everywhere for money. Maybe not this unhealthy and dangerous or full time but it still happens everywhere.

[@zteaxon7787]

​@@neduzaaduzen1408 In Belgium 12 year olds got crushed in mines or under industrial weaving equipment in factories. Children can do some labour, earn some money outside play and study but it should be safe and healthy.

[@zteaxon7787]

​@@neduzaaduzen1408And if it's exploitation of course it is totally unacceptable.

[@Elsprouto]

So nice to see they are using the Super Very Good Indian Safety Sandal and Mark I Flip Flop.

[@amalkumar2775]

This is Pakistan, not India

[@Elsprouto]

My Mistake how silly of me. I can now see it's the Super Very Very Good Pakistani Sandal for Safety and the Mark 2 Flop Flip. Thanks for the tip.

[@The_Unknown_Smiley]

Gotta bring india into a video which isn't even shot in india eh?

[@Elsprouto]

Well to be honest, if you put an Indian and Pakistani standing side by side I wouldn't be able to tell the difference. Just like a Canadian standing by an American.

[@amalkumar2775]

@@Elsprouto Actually you can easily distinguish between an Indian and a Pakistani by their clothes.

[@dahak972]

All that steel and equipment and no one can figure out an overhead pulley system to transport those giant pieces?

[@roobear78]

its pakistan dude,its cheaper just to hire men than invest in equipment

[@oldandintheway9805]

The American Indians never invented the wheel. The Asian Indians never invented the table!

[@dahak972]

@@oldandintheway9805 yeah I get it. Poor people are cheap to replace. Who needs modern equipment.

[@dougaltolan3017]

A pulley just goes up and down. You'd also need a rail to use it to move. If you want more than just a single straight line, you need that rail on its own rails. The pieces are all different sizes, so whatever grabs them isn't simple. Then theres what happens when it breaks. Your work stops and you need someone experienced in getting it going agam.

[@adamgentry332]

They make simple magnets that would pick up those steel plates no matter the variable sizes

[@Palsrible]

Brilliant engineering and thought processes put into this whole process.

[@eddiee2371]

Not only is it amazing to see this and appreciate hard work and technology but the thickness and weight of these plates was actually part if something that floats. 😮

[@keithjohnston5422]

So one idea is to give the boy a SCOOP for picking up nails to put in the box make things a bit faster. Also what is the fascination of throwing everything on the ground and then having to bend over and kill your back to move it again. If they stacked things at knee or waist height they could move things easier and with far less effort.

[@geoffcrowe3018]

I agree with you and have watched quite a few of videos like this and can only think that if they had a scoop/bench/hopper etc it would mean one job less? I may be wrong but seems that way.

[@mikeedwards1768]

dont be disrupting this perfectly balanced system theyve got here now...

[@keithjohnston5422]

@@mikeedwards1768 I canna stop saying the truth I have watched SOOO many of these videos and it drives me insane :P

[@Гриха-ч7ф]

Да! Всё на полу! Простые обрезанные канистры или что-то похожее могло бы в корне изменить их жизнь.

[@jamesadams893]

@@keithjohnston5422 The ground is free a table or bench or scoop costs money.

[@paulconetta2264]

I guess AA Muggen doesnt mind children are boxing nails! Brutal!

[@12monkeys29]

child labour saves them a fortune!

[@xomox5316]

Do you mind children are getting gender mutilated in the west with drugs and surgery?

[@jdboy9]

I can't get a 25' extension cord to not tangle into a knot. Yet these guys throw a half dozen coils of wire around without one snag.

[@dougaltolan3017]

They do practice a lot though.

[@billybio6840]

No kidding, they would be handy when it’s time to get out the Christmas lights😂

[@Mardy72]

​@@billybio6840 or untangle a slinky

[@dereknalley]

Right? I can manage to tangle a single slinky, yet these guys have a 400 meter slinky moving from spool to spool with no problems. I can't imagine how many fingers this place has eaten.

[@xomox5316]

one of those jobs you only make a mistake one time, steep learning curve

[@peterewski]

I concede that these men are indeed real men. Hard work, tough conditions and to work with thick steel plates in sandals. These men are tough.

[@moidenis8120]

Respect.

[@philosborn1840]

And I thought living here in the western world, I had hard work. These workers have it so difficult.

[@swarnamohanty3121]

Hard working people , salute .

[@DavidHuber63]

When I need a humbling:) ty, God bless

[@bastiaan7777777]

Yes, god bless them working there and you not in that situation?

[@frankferguson6358]

How to turn an old ship into a useful product and provide jobs for people. Recycling at its finest. Hats off to these guys.

[@samlealaogata842]

Some safety gears will be much appreciated for these hard working people and a safe working environment

[@RazaXML]

if your kid doesn't want to finish high school or go to college show them this video

[@nalini7186]

I’m living that dream as an iron worker for the last 16&1/2 years plus 7 years of heavy carpentry before that my knees hurt and I turn 40 in 2 days they say I need surgery but who can afford 2 months of recovery w this economy

[@ayedubya94]

<a href="#" class="seekto" data-time="869">14:29</a> everyone loves a slinky

[@briankgarland]

The quality control and safety protocols are top notch. 😂

[@ronblack7870]

it's good for india

[@Mirror3266]

​@@ronblack7870video is from Pakistan

[@wolfurystryxx5878]

Next time your tween child complains about the slow internet or not having wifi, show them these young children who have to work in order to help feed their families…..No shoes, no gloves, no safety equipment. Remind your children why it’s a privilege to live in the U.S.A. 🇺🇸

[@jweebo1463]

I like to watch these videos not just to see how things are created in developing countries. But also to see the interesting tools they create to finish the job. Such as nail rope taped together to make rakes or some of the hoods and turning machines.

[@LogicalNiko]

I buy all my nails packaged in Heineken boxes.

[@443DM]

My Heinekens come in nail boxes

[@BarryRudge]

These young men certainly graft hard and not a single pair of safety boots between them. Just imagine what injuries would be received if one of those plates land on their feet. They would be crippled for life.

[@henryt9254]

Try bringing that manufacturing back to US.

[@xomox5316]

We have automation, work smart not hard

[@henryt9254]

@@xomox5316 With that mentality, soon you don't even have to use your brains......AI could do that for you. Then Darwinism takes over and we all would turn into dumb and dumber.

[@ADF_Cable]

Love the kids getting involved!

[@80-hd77]

Say what you want but these guys are working hard in dangerous situations and I would trust one of those nails any day over what I can get at Home Depot

[@Average_Ohio_Citizen_]

Wow, zero respirators, almost no foot protection, zero ear protection, zero safety goggles, no visible emergency shut-off buttons, temperatures easily exceeding 120 degrees. My respects.

[@benjurqunov]

Just like the US and Europe were back in the day.

[@Average_Ohio_Citizen_]

@@benjurqunov How long ago? What's your point?

[@ronblack7870]

back when us was great

[@WatchThis2025]

5 nails in the bin, 5,000,000 on the floor

[@michaelmallo6800]

If by bin you mean that small bucket, it's just for sampling

[@grahamcarter8499]

This is classic pre Industrial Revolution stuff. I recently went to a lecture about the way manufacturing was in the 1700,s way before USA even existed. In the UK we were doing work like this then (no video though) only sketches recording what went in. These guys work hard but are 200 years behind the Western economy.. labour is cheap and expendable

[@ManufactureGarage1]

Right! Thanks for your feedback

[@saleem956ify]

Root cause...corruption

[@francoisjackson]

When labour is cheap and machinery/technology is expensive this is what you get

[@MarkZickefoose]

No, this is prime Industrial Revolution stuff - mass production, minimal safety, marginal regulation. child labor, all straight out of the darkest images of the Victorian era. Hell, they even have giant flywheels driven by leather belts!

[@markianclark9645]

graham...yes..but they do get to make a new World record Slinky regularly..somebody call the Guinness Book of World Records team and measure it..

[@Celebio_KM]

Everyone working here is slender and strong like a tank. Lets make it better for everyone guys. You won't die if everyone is living a better life. The problem, some people want others to suffer for them to live!! Ediculous.

[@maxstr]

If you get injured, there's a hundred guys waiting for your job and now your family is homeless

[@bastiaan7777777]

inshallah

[@justinbrewer9326]

Not once do you see OSHA or manager staring at you from a cat walk or thorugh a two way mirror. Yet it still gets done. just amazing.

[@СергейХарьковский]

Видно что кранбалки ещё не изобрели.

[@daviddavies9209]

Absolutely brilliant, some serious good skill and craftsmanship involved in making that slingshot! Without a doubt, the best I've seen ! Im very impressed 👌

[@search2learn776]

this is battlefield not a garage. hat off

[@carsonp.7009]

<a href="#" class="seekto" data-time="1303">21:43</a> that kid is smart, uses the nail to both cut the tape and also keep it in place to grab easier

[@neopret78]

Это капитализм и эксплуатация,а не ум ребёнка .

[@carsonp.7009]

@@neopret78 Вы неправильно поняли, я говорю о самой работе, выполняемой ребенком, а не о рабочем месте.

[@bubblesculptor]

They probably find uses everything using nails lol.

[@negator14]

@@neopret78capitalism in that country? lol

[@vornamenachname8001]

if you have a nail everything looks like a hammer

[@rogerarciso.trailerdrivers6775]

Amazing very hard working

[@chylimzbydzi]

Finally! I thought I'd never see child labor in those videos!

[@benyomovod6904]

This is not a child, it is an adult in the making

[@ArtStoneUS]

But they did learn the skill of counting nails using a digital scale, probably the most advanced technology in the entire place

[@bobbybeeman7280]

I was born in the united States of America in 1948 by 1954 I was pulling bags of cotton down the rows picking cotton is very hard you never know until you do it. bent over all day etc. I picked every kind of fruit and vegetable grown in California sure it was hard work but it had to be done in order for us to have enough money to live on through the winter months when there was no work to be had for 4-6 months for neither adult nor child. The hard work sets in self discipline at an early age and stops the kids from becoming corrupt like the US has become now days. I am now 76 and wish that the farm jobs were still available to all Americans like they were before the great lousy Caesar Chaves strikes that pushed hundreds of thousand of us natural born folk out of work . I would go to work now but no one wants to hire and old man except in the old days a 60-80 year old man made a living out of hard work. It sucks what the US has become; it never again will be as good as it was back in the 40-50's and early 6o's. They took our jobs we go homeless and hunger.

[@chylimzbydzi]

@@bobbybeeman7280 Do you really think Americans want to work in the fields? Come on, they'd rather beg than do that...

[@bobbybeeman7280]

@@chylimzbydzi Did I not just say it. Even my adult grandchildren whom are out of work and some with no income at all would prefer to work and eat than go hungry which some do go hungry and that quite frequent. YOu must bee living in the land of welfare and food stamps and are the real lazy fools that take a bad look on reality. I am an old man nearly 1/4 of my life in the US was homeless. There are many like me that would rather work yes even in the fields than have to realy on the filthy government shabby give aways. One lady on welfare her neighbors partied always and some times threw empty beer cantainers in her yard .The child protective services showed up on day and threatened her to take her children 6 kids the father died in an accident. She would have loved to have taken her kids into the fields with her and worked and yes let the kids work some to if they wanted. Not all people are lazy _ _ _ _

[@Freddyfrm18]

Osha would not be happy seeing all those guys in sandals.

[@earlmartin8309]

so proud of these men and boys (hopefully after school or on the weekend) working so hard during their industrial revolution.

[@bobbygene8274]

School?

[@КиримПолтаржицкий]

Есть такой предмет. Он называется "Научная организация труда". Там, в частности, сказано: если взяли в руки деталь, с ней надо произвести полезное действие, то есть, операцию, прежде чем опять выпустишь из рук. Не заниматься перекладыванием с места на место. Дальше - без комментариев.

[@GrrrRu]

Эти люди поумнее нас будут. Мы с этими компьютерами и организациями труда только лишь больше производим для дяди😂. А им лучше за рубль лежать, чем за два бежать.

[@maxcrow4212]

@@GrrrRu ага! видно как они лежат, ворочая вручную пластины корабельной обшивки и перекладывая по пять раз одни и те же куски металла.

[@GrrrRu]

@@maxcrow4212 изображают бурную деятельность. Всё как обычно)) все заняты, употели, но, заметим, хозяин при этом не получает БОЛЬШЕ продукции🤣🤣🤣

[@ПерекупБарыгович]

<a href="#" class="seekto" data-time="380">6:20</a> Как элегантно чувак в сандалях перепрыгивает расскаленную петлю😂

[@33Monkeys33]

The majority of these will be sold in Amazon.

[@rcdogmanduh4440]

A good nail, a fine nail, and a bunch go in every box! Love it, hard work done by good men!

[@travisweber5364]

They're really nailing it.

[@wheresarnie1]

Father Pajit: If you don't finish your studies, you're gonna end up workin' in the nail yard. Little Pajit: The nail yard, what's that?

[@kingabbasi8014]

Bro we r not pajeets

[@The_Unknown_Smiley]

This isn't india man it's pakistan

[@jeffj2495]

A new record. 0.5 days without a workplace accident.

[@iliyasjobs]

They nailed it..

[@urmaisgay6495]

what a pleasure to watch them work

[@TheAfterWorkGarage]

That chimney hood for the furnace is holding together about as well as my personal life.

[@blackietotheend]

Amazing to see such ability with recycled products, but safety is terrible, a few pairs of steel capped boots and some masks, won’t break the banks. Every worked deserves safety in their work place

[@ManufactureGarage1]

Thanks for your feedback

[@tommooe4524]

No child labor law?

[@mrsb33]

No laws or rules whatsoever, it would seem.

[@xomox5316]

no law against mutilating kids gender in the west?

[@kidkique]

How do you mutilate gender? do you mean genitals? ​@@xomox5316