031 Top 5 Reasons Why Your Speed Queen or Huebsch Dryer Won't Work

[@juanrivas1273]

Working as 2 hotels in Panguith Utah. Your Video its great .. Every time dryers fail. Your info saves the day. Thanks.

[@robgrant1353]

How about the drum stopped turning. Does this unit have a belt drive system or direct from the motor model I have is HT050N

[@kennylee-e3b]

Both motors are on line 1and line 2 is not used that ishow it came , how can I operate it using line 2 for 220

[@SoullessProductions]

I'm getting 120 and 240 should I be concerned?

[@sarunvong]

Why the flame burn to short than normal time?

[@DavidTerry-g1w]

FYI, I had a problem with no heat and found that the centrifugal switch on the blower motor was not making good contact not completing the circuit for calling for heat.

[@MrSolar.]

Hello, I have speed queen st 30"s The top and bottom unit both will start and ignite the fire but when the igniter stops the fire goes out 3 seconds after. I swapped all sensors, relay, igniter box, solenoid coils on gas valve and get same result. Checked both thermosters are reading 0 ohms. I also opened both exhaust ports on top and bottom in case of a clogged exhaust clog's. Confirmed the air flap is being drawn closed and verified the switch is good. Any idea?

[@bchong1688]

Hi, My top STT30N stackable tumbler constantly fire up for a minute and then no fire after a minute. After a minute it fire up again and continuing doing it. What seems to be the problem?

[@ironcruzer747]

I appreciate your sharing these troubleshooting tips.

[@jaimercalderon4527]

I have the SH error code I check all thermistors all good what alse could be wrong?

[@roxanac2502]

What about the ether new cable ?

[@robertmurray23]

Our top machine won't start. Bottomworks fine... Motor spins with or without belt for 1-3 seconds and then stops. Tried another good motor and it does the same thing. Voltage to the machine is good. Any ideas?

[@ejohnson3818]

Blower motor is not coming on. Dryer runs but no fire. What can I check?

[@HPRCKMST]

on my case, after replacing the blower I found this part broken. M414704 Thermistor. I think I broke when I vacuumed the inside compartment. I don't think it is in this video. almost the same dryers.

[@ivanrosas8977]

Thank you very much for the video. It is very helpfull.

[@yazzirmontejo4414]

speed queen doesn't stop spinning only when i take it off let it unplug. It is double, one below or another above, thank you very much in advance

[@anthonygoss8415]

Wow! I have a group of 5, 2006 STO300DRG stacks. I'm just beginning the task of replacing gas valves. Have you had to at anytime replace gas valves? I replaced rear components and still came up with intermittent heating conditions. This group of dryers ar the oldest of 16 stacks....

[@codyharris3741]

I have a speedqueen st035n and it has a code ed5 td 58 error code what does it mean as the machine didn’t come with a manual with codes

[@josephalvarez5303]

hello man hope you doing great, I would like to know if theres a way to bypass the dryers, Iam ussing the model ST0300DFG, exactly the same model as the video. I want to bypass the coin drop since Ive got the dryers at home getting me in trouble with the coins.

[@joeseelig2385]

I keep blowing blower fans every 1-2 years. Is this normal or could it be an issue with machine running too hot

[@sboyd7551]

Being trying to trouble shoot no heat problem, all the above mentioned have been checked. I'm having intermittent heat, sometimes heat, and sometimes no heat

[@anthonygoss8415]

What is the make, model and year of your dryer?

[@agimjusufi6850]

check relay or just replace it and see if that takes care of problem. Sometimes, relay contacts don't sit properly

[@stephanieteague6381]

It lights and then shuts off after about 10 seconds.... help.

[@erickmartinez3571]

My dryer is not getting hot

[@ritch90]

Hi really need your help bro. Im setting a mew laundromat. Im buying a stacker (dryer on top amd washer on bottom). Do they have flaw or is it better to seperate them?

[@laundryownerswarehouse7016]

Call the office and ask for Andy, 954-537-1643. He’s happy to help you with you!

[@romelvillegas2840]

Hi good morning I romel I from México , this vídeo is exelent, I have one machine disayme for repair this drye si not hot heating, I see in this vídeo who repair I thingso is the fusibles or teostat Exelent vídeo

[@oscarxique4594]

Hey man what’s your thoughts on the new gen 7 wascomat washers ? I might soon upgrade my store but looking into more options. Would really like your output on the new equipment coming out. Thanks. For all your vids !!

[@Ihategobblegum]

Trash

[@AlexVargas-i8z]

I have one that is warming me up too much and it almost burned my clothes.

[@nismail66]

Need repair guy in Tampa Florida, if someone can help me

[@satishbhaibhakta1269]

My huebsch dryer will fire up for about a minute then shuts up n wouldn't fire again