How to Datalog Your Dynamic+ Tuned Audi or Volkswagen with The 034SPI Mobile Flashing Application!

[@AudiSportB5S4]

Amazing interface! Happy to be on board with this!

[@034motorsport]

Glad you like it!

[@rutviknakrani7906]

This like providing warranty on tunes ; hats off 034 Even after selling the tune you guys are willing to check data logs and help determine any faults

[@EMPI_Inc]

well done 034Motorsport!

[@mostlypostie1]

That is seriously slick. Good job.

[@Iceman125967]

@034Motorsport, can you change the Style of Gauge, perhaps something to think about ?

[@034motorsport]

Perhaps something to evaluate in the future!

[@aaronbeven3240]

Any plans to make this Apple CarPlay / Android Auto compatible? Would be awesome to have this displayed on the centre screen while driving.

[@034motorsport]

This is something that is on our development radar, with some adjustments to make the app easier/Safer to use through an MMI

[@sed6]

Will the gauge display ethanol content?

[@034motorsport]

Unfortunately it will not as there is no ethanol content sensor integrated from the factory.

[@fccquoter19]

When doing the data log pull, do we still do a 3rd gear WOT pull from 2,000 rpm to redline? Should we submit a couple back to back pulls to see how the system is recovering or is just 1 run enough typically to measure the health of the vehicle?

[@034motorsport]

Depending on what it is you are aiming to have examined, the desired logs may change. We recommend you reach out to our tuning team before sending logs in explaining what you are looking to have checked so they can provide guidance on what logs to capture. Email [e-mail]

[@manek1978]

To view the gauges and to datalog does the phone need an internet connection (I know it will need one to actually send the logs)?? I want to use an old iPhone I have sitting around instead of my primary one. Also, can you configure warnings with the gauges?

[@dragbug100]

They did say during the live show that you will need to be connected to the internet either by Cell or WIFI. They also said they are working on making it standalone and not need an internet connection but it's not capable of that yet. I would assume even standalone it would have to connect at some point to download updated files.

[@manek1978]

That's silly. Tons of us have old phones or would buy a cheap Android to have a dedicated phone mounted in the car just for this. @@034motorsport

[@034motorsport]

We will have offline gauge views available in upcoming updates. Currently you will need active internet connection to access data gauges and to perform data logs.

[@misterLin]

is there a way to change the units of measurement? for example... what is 1000 unknown units of boost in something more familiar, say, PSI?

[@034motorsport]

Boost is currently measured in kpa/mbar (millibar) as that is how the ECU reads boost internally. Units of measure on the data displays are currently locked to the units that are used within the ECU, but a later update of the app will allow users to select their preferred unit of measure. In the meantime, think of it as you broadenign your metric horizons and thinking more like an ECU!

[@fishbone470]

Great vid. I just upgraded to the new adapter and it works great! The only thing I can think of that would make it better would be Apple CarPlay support!! Being able to see the dashboard through the MMI screen would be awesome!! is that update on your roadmap at all? Cheers!

[@034motorsport]

Carplay compatibility is something we're working on!

[@mpddiesel]

Good luck here gents. Apple would not approve this for Torque, going so far as to not even allow the app on its platform. Android Auto also prevents live gauge display. Only way I’ve found to make it work is by using a screen mirroring solution. Not ideal, but at least you can view gauges on the dashboard if you like.

[@ce3zo]

Is it recommended that I leave the device plugged into my obd port at all times or only when I want to check data ?

[@034motorsport]

You can if you are driving a mobile display, logging or flashing the ECU, otherwise no need to be plugged in 👍🏽

[@ce3zo]

@ thanks so much for the response!. Also will my individual mode have as much gains as dynamic?

[@RSPerformance-RS3EVO]

Are all these options avail for my 2019 rs3? Also what's the new updates for the "1st gear revision tune"?

[@034motorsport]

Live data view and datalogging features were just released today for the 8V.5 RS3. Feel free to email us at [e-mail] and we'd be happy to chat about our TCU tuning and revisions for your RS3.

[@robbiewakes]

this is fucking revolutionary

[@RyanSheppard]

Would you be able to make the app available in android auto?

[@034motorsport]

This feature will come in a future update!

[@ajhauk]

Does the phone need to be unlocked with app running to log data?

[@034motorsport]

Yes, the app needs to be in the foreground

[@ajhauk]

@@034motorsport perfect, thank you!

[@brandonbauckman7383]

so just the brick at the end of the dongle has to be plugged in? I don't also need a laptop right?

[@034motorsport]

That's correct! Just the dongle needs to be plugged in

[@advocado7373]

How to review those logs yourself? Can desktop app be compatible with those logs?

[@034motorsport]

The desktop program and 034SPI are completely different programs and do not overlap outside of the fact that they share the same internal server. When you choose the option to send logs to 034, the log file is attached in the email confirmation to you. You can download and review from there if you please, but we do not currently have a user-interface for datalog viewing. This is something we are working on.

[@fleebag734]

MDF format? So we must convert to csv to view? @@034motorsport

[@matthewm4170]

how do I view data logs myself

[@gsaldo]

He just showed you

[@MMPGAMMING]

After taking a data log how do I view it? When I click it all I see is the data log details but where can I see the actual data that was being logged.

[@034motorsport]

Data logs cannot currently be viewed from the app. Please submit your data log to us and email us at [e-mail] for further assistance!

[@davet231]

Idk why but on mine when I try to configure a gauge the page where it should have the data options is blank.

[@034motorsport]

Please email our team at [e-mail] and our team can help troubleshoot the issue you’re experiencing there

[@icecubeninja7932]

Is there a way to view your data logs without sending you a file? How can I get the data file without emailing it to you? I don’t want to spam your inbox with logs that I don’t need to bother you with.

[@034motorsport]

User accessible log viewing will be coming in a future update.

[@zacharyw4490]

Why is my fuel pressure reading at 130000 hpa 💀

[@034motorsport]

email [e-mail] if you have any questions about the data being collected from 034SPI

[@dani38623]

Does it work with the b8 s5?

[@034motorsport]

We do not offer tuning for the 4.2L V8 S5s, but this is compatible with all 3.0T Supercharged and Turbocharged S5s!

[@dani38623]

@@034motorsportjust now i saw your reply, i was talking about 3.0T B8 yeah. Thank you!