06 Kenworth W900 Ep 2 Holy Oil Pan!!!!

[@JeronWhite]

This is.a nice rig

[@rufusheaggans9389]

Congratulations brother I know you and your brother will do great things with the new farm 😃😁

[@swexpress308]

so much work.guys like u amaze me to take all that on..ur the man

[@blantondynamics]

💪💪 this is the biggest project I have taken on, but really, it's just a really big heavy powerhouse pickup truck without a bed 🤣

[@swexpress308]

@@blantondynamics lol ya it is

[@Mister_386]

Congratulations on the new truck

[@blantondynamics]

Thanks! It's gonna be a fun but long adventure

[@Mister_386]

@@blantondynamics I know what you mean I just bought a 386 from the auction

[@walkercouchis8704]

Keep the videos coming. I watch a lot of people on KZbin that’s rebuilding semis. My dream job is to drive but since I’m deaf it gonna be harder to drive. Keep the videos coming can’t wait to see what you do

[@Emptybtlswhiskithrtls]

You really need to take those caps off and inspect those mains. I would be willing to bet you you going to have some scratches on a few of those mainstream, looking at the amount of debris in the the back of that pan.

[@blantondynamics]

Check out the new video. I don't like to spoil the next video, so I didn't respond to your comment until I had the video done. But you weren't wrong about checking them.

[@shawnjarman9860]

Just subscribed, hope you have great luck fixing up this beauty

[@blantondynamics]

Thanks dude i appreciate it

[@JeronWhite]

Nice truck

[@blantondynamics]

Thank you

[@billyhaddock5540]

Blanton Dynamics, I see in your near future some more problems. will be a great W900 when she is done.. hope for the best..

[@blantondynamics]

Psychic Billy, you're not wrong...

[@barrygibson1514]

Making Good Progress Bro!🤙😎😎

[@blantondynamics]

💪 yes sir!!!!!

[@ihguy2113]

will be an awesome looking truck when your done obviously the other bidders or bidder had not idea of all the damage

[@blantondynamics]

No there was no way to see all the damage online in pics. You'll see in the next video how deep the damage goes. I've got my work cut out and recording every bit of it.

[@scottycollins1829]

Luv the K-DUBB project!!!!!!! Trk is Gonna be AWESOME AGAIN like it was before the accident. 😎🔊🔊🔊🔊🔊🔊🔊🔊🔊🇺🇸💰💰💰💰💰💰💰🏆💎🥇🙌🏾👍🏾

[@blantondynamics]

💪💪💪 yes sir! Eventually I'm gonna light this thing up all the way around too!

[@bradboles9202]

Keep the video’s coming great job

[@blantondynamics]

Yes sir thank you! Trying to get one together of oil pan and engine stuff now.

[@lesterturner8346]

Will it cost you more to fix it or the side of what u pay for it ?

[@blantondynamics]

It cost more to buy it then to fix it

[@chrismedway1150]

Spray the rusted nuts with 3 to 1 ratio atf and acetone let it sit overnight nuts will come loose

[@blantondynamics]

Thanks

[@MrFitbikeco10]

You bought a wrecked truck but don’t want to spend $500 on a used pan due to lack of funds? I can’t wait to see how the rest of this project turns out if you can’t afford a oil pan

[@pc4x4]

Why spend the money if he can’t fix it himself? All it does is hold oil in the sump.

[@blantondynamics]

Yeah, so where are you getting a $500 pan from? And how much do you think it'll cost to ship a 5ft long, 20" wide, 50-pound oil pan? Ebay cheapest rear sump (can't be a front sump) used oil pan is $900 BEFORE shipping and taxes. If $500 ain't much to you then just donate it and send it to me. And like @pc4x4 said, all it does is hold oil. And to add to that, why is that a big deal considering EVERY drag/race car has a fully welded aluminum oil pan and some of those cars have 4000+ hp and rip down tracks at 9k rpm. So why can't I just weld up a little ole hole in my oil pan?

[@mrjuicedatrucker8384]

Well it’s hard if he spent most of his money buying it,gotta stack bk up to fix it,I feel him cuz I got a 06 w900 sitting in my backyard waiting to be rebuild

[@dannyblas5155]

Buy a used oil pan don’t weld it that’s a nice truck it will come out cheaper

[@blantondynamics]

Used oil pan is $900. I'll use that money for other parts and things. Welding will be basically free. Video dropping tomorrow showing some other details.

[@ambermiriamemma9636]

❤ you go baby!!!!!

[@blantondynamics]

😍

[@DavidKamaz]

Do not weld it. It's not worth it. This is a very important part of your engine. I work with cat engines a lot. This oil pan is $500 used all day long. I have one i can sell it to you. Also, you need to pull main bearings and replace them.

[@blantondynamics]

Thanks I appreciate it but I'm gonna save that money and put it towards other parts needed. Putting the video together now showing oil pan. I called everyone within 200 miles of me and they either didnt have one or they had the pan for $900 and up used. One guy told me $1500 for a used cat oil pan. I told him he was crazy.

[@joecummings1260]

Do you have any idea what happened to this truck? I think I'd drop all the bearings to at least have a look. You don't want to spend too much money on that engine before you know if it's good. Cats can be really good long lived engines if you take care of them, but parts are so damned expensive. I was running a 3406 E back in the early 2000's It ran good but started leaking coolant into the oil. I pulled the pan and pressurized the cooling system and it was dripping coolant out of #5 cylinder liner where it seals to the block. I figured if I was going to have it that far apart I'd do an in-chassis. Then I noticed the cam was starting to go. Now I'm pricing parts and Cat is over 10K, aftermarket is like 8K and that was back in 2005 and I was dealing with a good rebuildable core, no damage, crank was perfect.. I bought another truck, a LTL9000 Ford with a cummins for 5K from a fuel company, 250,000 miles good tires, everything and was back on the road in 2 days. I still run it, It's in my garage hooked to a trailer just the other side of my office wall where I'm sitting right now

[@blantondynamics]

Looks like another truck came over and hit him and it caused him to possibly hit another truck which plew the front tire out and then I think it went down into a ditch and possibly hit something hard. Hard to tell but most of the damage is down low. I'm gonna be showing the engine and dig into the real problems in a couple days.

[@tossedsalad5532]

What is the color of the Kenworth ? Aztec Gold or other paint color do you know paint code

[@blantondynamics]

Your guess is as good as mine. I think it's some type of copper color, but I'm not sure. It's custom, so when I get ready to paint, I'll probably have to do a plethora of spray outs till I can match it.

[@tossedsalad5532]

@@blantondynamics Kenworth used a color called Aztec Gold on 2001 it looks similar.

[@blantondynamics]

@tossedsalad5532 thanks for the info. I'll check that for sure. I'm gonna take it to the paint store and have it scanned and that'll get it pretty close and then I can try to adjust it from there to get it to match. Won't be easy but just needs to be close.

[@stevenrose4041]

🔥🔥🔥🔥🔥🔥💯

[@blantondynamics]

💪