07-09 Nissan Versa CVT Transmission Failure FIX PT.02

[@davidwilson2496]

This video saved me from junking my Versa. I was told by several mechanics that it needed a new transmission, and that no one services the Nissan CVT transmissions because they are not worth it. Mind you I did find someone last year to service mine and I am guessing from the state of my filters that all he did was change the transmission fluid. AND he used the wrong fluid too. The fix took me a couple of hours as I was slow and methodical, after i added the fluid and started it up, it drove like a dream. Thanks so much!

[@asianmechanicguy6483]

Glad to hear to that

[@axlef1513]

Thank you. This video is a ray of hope for me, at least for today. Recently found a slight occasional shudder in an 07 Versa, I just ordered the Nissan CVT 3 fluid and came across this video. I cannot tell you how helpful this may be. I was just going to do a drain and proper refill. If these filters are clogged, that would have been futile. Thank you so much. Subscribed.

[@asianmechanicguy6483]

youre welcome ...

[@soulance8342]

Double check the spec for your car but I believe it is supposed to be CVT N2 fluid. It night not be a big deal as I've heard one (either N2 or N3) can be used in both but the other can't be swapped. I could be wrong and wouldn't take my word as fact I would just be sure to double check. There should be a sticker on the underside of your vehicles hood that will have the fluid requirements listed.

[@masttt8480]

The part number for the paper filter assembly is 31726-1XA03. The filter and socket are sold together.

[@Z33Garage]

Do all versas have this? I dont see this in the FSM

[@masttt8480]

@@Z33Garage Yes, if you have an automatic transmission or a cvt, at least for the years 2007-2012. For the manual transmission or another model after 2012, I don't know. The filter is different if you have a standard automatic trans. You won't find it anywhere. You need to check a part diagram like this one. www.nissanpartsdeal.com/parts-list/2008-nissan-versa-hatchback/control-valve-atm.html?Diagram=317_B004 Do a research for your model/year and you'll find out.

[@Z33Garage]

@@masttt8480 Thanks! My wifes versa is a 09 Versa 1.8L S hatch with (standard) auto trans. Per those specs and her Vin number the site came back with this filter. www.nissanpartsdeal.com/parts/nissan-filter-assy-oil-auto-transmission~31726-3ax01.html?Make=Nissan&Model=Versa&Year=2009&Submodel=Hatchback&Filter=(4=S;5=AT) which I then sourced the part number on Amazon and they have the part cheaper with shipping. www.amazon.com/Nissan-31726-3AX01-Filter-Assy-O/dp/B00HKSH9WW I am buying the strainer / trans seal from the local autoparts.

[@sharksaysso3309]

Need help finding a stepper motor part# that will fit 2009 versa 1.8L L4. The transmission part# is 310CM-1XC6CRE and last 8 of Vin# is 9L403029. Ty everyone.

[@fergap9438]

After changing the step motor and filters it was running good for like 100 miles and then it was bucking again, it wasn't reading the speed. Could it be the speed sensor or do I need a new transmission?

[@asianmechanicguy6483]

then ur transmission is done replace it

[@DenaWald]

I have low pressure and solenoid codes on 2009 Nissan Cube (same engine as Versa). I planned on changing these 2 filters and came across this video. My fingers are crossed this fixes the issue as been ready to junk it due to high cost of a replacement transmission.

[@bchangsf]

Great video! Question I have a 2011 Versa I bought from the auction the car doesn’t move in any gears I also can literally push the car when it’s in drive you think this method would help?

[@asianmechanicguy6483]

give it a try

[@kekewallace8163]

Did it work

[@kekewallace8163]

Did it work

[@nosajsamaniego4512]

???

[@benardmutay4509]

Had a similar problem and it worked for me. I found some metal shavings on the pan, though whinning noise is back. Questions 1.What could be wearing down? 2.The car hesitates when stopped on a hilly road, gas pedal seems flat but when turned off and on again it picks well, what could be the problem?

[@columbia1991]

On some models, I hear there is a nut on the top side and once it's loosened, you have to unscrew even more parts to get to that nut. I have a 2010 Nissan Cube. I wonder if mine has that independent nut.

[@asianmechanicguy6483]

sorry i dont know what u talking about... this car 07 to 09 nissan versa has only 2 filter which you've seen here and im showing how to clean it so that the flow of your transmission fluid will be smooth

[@tisha404]

Hello Rhaswins I need help. I'm having a problem with my cvt transmission. The codes are P285A clutch b and P2859 clutch a. Would you recommend me trying to get the filters cleaned? I'm a young woman trying to figure this whole thing out lol

[@asianmechanicguy6483]

you can do this method it will help ur car runs better as long theres no broken parts inside your tranny and theres no weird sound coming from ur tranny ur car might have only clogged tranny filter that causes those codes to show up

[@stratosjeff7007]

my 08 just had the trans slip twice on me the other day, i don't have any warring lights though, ive parked it and haven't driven it since

[@SynysterShadow]

Would this cause the CVT transmission to not shift into overdrive? We have an 08' Versa SL, and it's been doing fine until today it just quit shifting up to OD, tried pressing the OD button on the shifter, and whether it's lit up or not, makes no difference. Worried that we lost overdrive altogether.. Any advice??

[@asianmechanicguy6483]

scan it for codes thats the only thing i can advice to you for the maintime

[@Geogoslee]

Hi bro, I have a 2007 Nissan Latio with CVT that have no problem with forward driving but have big problem in reverse mode. I need to play around the gear from N and D mode several times with a bit of accelerate to get it to worked and it will give a huge jerk before it started to reverse. It is worse if I start from cold engine after overnight parking. May I know if it is the same problem as what you shown in the video? hope to hear from you soon. Thanks!

[@asianmechanicguy6483]

Hi bro.. For sure there's a problem with ur transmission scan ur car for codes most of the time check engine light won't show up on the dashboard in nissan.. After u scan it u will find out what's wrong with it but either way ur transmission need attention.. Don't use it for a long drive..get it scan first

[@Geogoslee]

@@asianmechanicguy6483 Bro, Thank you very much for your reply.

[@abdelkhan8206]

I have the same issue with reverse

[@abdelkhan9225]

Hey man thank got a 07 Vera’s sedan drive forward easy. Reverse gear take time before engaging? What can be done? Thank you

[@asianmechanicguy6483]

just follow this method it will help to distribute fresh fluid into ur transmission parts

[@jonidimeri1578]

2009 versa sl 1.8 p1778 code, hesitate a lot when moving, fluid transmission looks clear and clean. Should i change step motor? Worth it?

[@asianmechanicguy6483]

clean the transmission filter its before considering replacing parts

[@Zanseldorf]

I have a 2009 Nissan Versa. Changed fluid (Idemitsu CVT type N) and both filters at 35,000 miles. No problems. Transmission began whining at 60,000 miles at speeds above 35 mph. No codes. Changed fluid (5 quarts) and cleaned both filters with brake fluid. Neither filters seemed very dirty. Possible small non-magnetic particles in pan and on filter screen. Vehicle continues to whine over 30 mph. Is failure eminent? How do I diagnose problem? Should I continue to drive?

[@asianmechanicguy6483]

ur variator is getting worn very common to 07-09 nissan versa install an aftermarket transmission fluid cooler it might help to cool the the tranny fluid same thing with transmission parts

[@JuanCruz-nx8ns]

Good video I will try it on my 08 verse. Thanks man. Need more people like you. God bless.

[@asianmechanicguy6483]

no problem bro

[@harrywalia2057]

Hey so I have a 2007 versa and it doesn’t shift out of first gear. Do I put it in drive and it takes off but will not go out of first gear into 2nd 3rd or 4th. It is just stuck in its first gear. Any suggestions?

[@asianmechanicguy6483]

try this method

[@sandymitchell8182]

our 2015 has p285a code, clutch pressure plate. i may have the code wrong but its close. car drives but shudders,sometime wont go into reverse . man we cant afford to replace a transmission, my wife cant work now and I cant either this sucks

[@justaversa2214]

I have a p1777 code for my 09 Versa. Which is a step motor in cvt problem. What's the best route to take? I really do not want to take it to dealership and dish out 2k on it

[@columbia1991]

Great video. Can you share the torque specs for the pan bolts, screen and filter?

[@asianmechanicguy6483]

61-78 in lbs or around 6.5 ft lbs but thats too loose for me so i just do it hand tight not too loose not to tight

[@angelloya6035]

Thank you very much for this video. My son's car is driving like new thanks to you 👍

[@asianmechanicguy6483]

thats good to hear

[@randyali3555]

Hello Rhaswin, I have a 2013 Nissan Versa that is not shifting from first gear.I can move forward and reverse but its not shifting.Replaced Primary speed sensor.Replace oil etc.Any suggestions?

[@asianmechanicguy6483]

im pretty sure internal parts of ur tranny is damage you need to rebuild it ur replace a new one

[@Arifulislam-ov4uu]

I have Nissan tiida 2009 have a one problem every morning gear D not working Aftar 2 minutes working gear 1 after D working after no any problem only problem morning D not working do you have any solution give me please

[@asianmechanicguy6483]

scan your car brother

[@jamiestrong7993]

What symptoms did it have before the fix ? I have one here that won’t do anything , no gears work. Park will stop the car though , any suggestions. I believe the codes were cleared before it got to my hands so I don’t know if them codes were there previously

[@asianmechanicguy6483]

car wont drive no movement and it has a transmission code

[@sharkbape2724]

Hi I have a 2009 Nissan Versa the car won’t go into reverse and will shift to 2/3 by over reving the car do you think this is the problem my car has no codes so it’s weird

[@asianmechanicguy6483]

try this bro it might help your car back on the road again

[@sharkbape2724]

@@asianmechanicguy6483 thank you man will do

[@richardbhagan8949]

Can the round filter be removed from the aluminum housing or is it built in?

[@asianmechanicguy6483]

yup but its really tough to remove it i need try it but i broke it

[@saberbensmaine5261]

Thank you for the video but does any one know how many oil he used like is it 6q or 7q

[@thykingdomworld]

just seen this. my versa 2007 suddenly developed the problem of high rpm but very low speed. the car has no problem moving ok at 10km per hr but when you try to accelerate, the engine responds loudly with high revs but the car does not pick up the corresponding speed and seems stuck at "low gear" at high RPM no matter how much you accelerate? Any advice?

[@asianmechanicguy6483]

try this method

[@Z33Garage]

Does the 2009 1.8L S (non CVT) also have this filter? All I see on the FSM is the strainer.

[@masttt8480]

Here www.nissanpartsdeal.com/parts-list/2009-nissan-versa-hatchback/control-valve-atm.html?Filter=(4=S;5=AT)&Diagram=317_A001 Part# 31726-3AX0A Number 31726 on the diagram For Standard automatic trans.

[@asianmechanicguy6483]

non cvt has different design of transmission parts when you open the tranny pan you dont see a filter ..

[@eymecoster]

@@masttt8480 how can i clean it ? do u have any videos for non cvt

[@asianmechanicguy6483]

sorry never seen a non cvt for this specific car but in ill encounter one ill post a video of how to clean a non cvt transmission

[@DrNemea]

@Jason McBroom I am also trying to find youtube video about AT transmission service for a year. I already did trans fluid change but want to change the filter. Mine is 1.8L 2012

[@juan-carlosramos6773]

Hey man, question; how about the gasket on that pan, do I need to change it? Tanks nice video.

[@asianmechanicguy6483]

Check your gasket if its a thin aluminum gasket thats the original one don't change it.. But if its a rubber gasket u decide base on the condition

[@juan-carlosramos6773]

Tanks bro, another thing. I have a versa hatch 2011 1.8L auto transmission. Do you know how much of the fluid do I need, and can I use silicon instead the gasket(seal) if so how long does the silicone take to get dry? Tanks a lot.

[@MikeAustin2012]

First. THANK YOU VERY MUCH for your knowlage and for sharing it with us. I have a 2013 Versa with a CVT that started with a bump or short slip and has moved to slipping doing right turns maybe turning left. Dealership has looked at it twice. (NEVER EVEN TEST DROVE IT) the 2nd time was a software upgrade that i think only lowered the error codes from posting. Its scary to drive, I've NEVER had any codes so they will not even try to get my insurance to fix it. I may try this since I wanna replace the fluid anyway. Cheers from 0hio.

[@asianmechanicguy6483]

no problem bro and yup try this method you're not gonna spend so much money so it's worth a try

[@MikeAustin2012]

If u can help a tiny bit more. I'm 67 and its been hot here in Ohio. When I can get a sample to smell. My auto has at 98k miles. If its real dirty or smells burnt. You say send for testing. Please tell me where and how expensive is that test. What if I fail that test. Put the old fluid back in but still clean the filter. Like I said, I paid $2000+ for a warranty. Or I'd say for a run around. Seems obvious that they have no intention to fix it. Just bang, bang going down the road. Cheers!

[@asianmechanicguy6483]

@@MikeAustin2012 if u paid a warranty then don't touch your car bring it to where u bought otherwise if u repair ur car yourself your warranty will be void

[@bigdawg7107]

I have one that will not shift to 2nd gear but runs and drives up to around 45 mph any Ideas? Do you thinks it might need the same filter cleaning? Thanks

[@asianmechanicguy6483]

first thing you have do check the codes even theres no check engine light on the dashboard ..after you check the codes open ur transmission pan if the code is related to solenoid check ur solenoid resistance but if ur tranny pan has metal parts then dont waste ur time replace ur tranny or rebuild it..cleaning the filter will only help temporarily

[@AnythingEverythingGh]

@@asianmechanicguy6483 How do you know the resistance of the solenoid to check ?

[@gmzcr]

fantastic I did the same step by step, I cleaned the filters with gasoline and put Repsol Matic CVT on my Nissan Versa SL 07 I went out to try it smooth and working perfect. Thank you so much

[@asianmechanicguy6483]

Glad it helped

[@mikkixo2242]

Have you done a 2014 Nissan Versa. Will these same steps help

[@asianmechanicguy6483]

i believe its the same i did 2012 versa and its pretty much the same its just they had larger filter i think but still it has a reusable tranny filter that u can clean

[@luiscruz2854]

Hi sir thanks yousoo mutch for the video, my versa does not move at all unfill is realy warm it starts moving but not mutch power, you think this is would fix mine?

[@asianmechanicguy6483]

This is one of the trick that i do for transmission issue for this specific vehicle.. Im not saying it will fix your car as we dont know yet the codes but if it had tranny codes like mine mostly it will fix the problem except if the cvt belt is broken

[@luiscruz2854]

I have an update sir i have the same codes and i did exacly what you did, it works!!!!great i hope this is a permanent repair thank you so much man!

[@vivarockradio]

@@asianmechanicguy6483 what were the symptom's, would this be reason for screeching in the tranny, have exact same versa vehicle. If CVT belt broken I assume it won't let it drive.

[@asianmechanicguy6483]

@@vivarockradio hey there u have to check the code first before we do the proper repair it might be the solenoid only or the whole solenoid valve or worn belt..

[@rholandamarilla6721]

Bro Good day just want to ask only i Have Nissan Tiida 2011 but i never open my transmission to clean it or replace the filter its ok or we need to clean it Thanks Bro

[@asianmechanicguy6483]

Clean it or replace it it doesn't matter bro

[@rholandamarilla6721]

@@asianmechanicguy6483 thanks bro

[@rholandamarilla6721]

@@asianmechanicguy6483 bro sorry to bother you should I put any silicon to put back the cover thanks a lot.

[@asianmechanicguy6483]

@@rholandamarilla6721 no bro ur metal gasket is good enough

[@sharksaysso3309]

Have a 2009 versa sl 1.8 L. Having a shifting problem from start. Accelerate s but hesitates from 1st gear from time to time.

[@asianmechanicguy6483]

Check the codes first even there's no check engine light appearing in ur dashboard before you do any repairs

[@sharksaysso3309]

@@asianmechanicguy6483 p1778 stepper motor.

[@sharksaysso3309]

@@asianmechanicguy6483 and low pressire p0746 and P0868, has 154k. Figure no one has cleaned the filters out either. So was going to try that first.

[@richieblair1374]

How many bottle a oil go in Nissan Tiida HR15 Engine

[@asianmechanicguy6483]

if u remove the tranny pan around 7 liters but if drain only around 6liters..but please check ur dipstick it should be on warm level after you run the car for 5 to 10 mins

[@richieblair1374]

And how many transmission fluid go in transmission

[@emilysturghill5992]

What can did you use to clean the filters

[@asianmechanicguy6483]

brake cleaner

[@user-pr6po6id4f]

Hey I’m having problems with my 2014 Nissan Versa every time it change gears it takes long to pick up the car jumps every time gear is changes and I took it to get look at but no codes showing...do u think ur method would work?

[@asianmechanicguy6483]

you can always do this method its better than transmission flush and it will help ur transmission works properly

[@webmastersof]

Did you do this method on your 2014? If so, did it work?

[@user-pr6po6id4f]

Nikola Tesla yes i did I change the oil and it’s stop jerking and runs smoothly

[@webmastersof]

@@user-pr6po6id4f I changed mine but it still is hesitates to shift into over drive. I wonder if I should clean both the trans filters in the trans as he did in this video. I didn't know if you cleaned the filters in your trans.

[@user-pr6po6id4f]

Nikola Tesla yea u should do that do also make sure that who ever is changing ur oil is doing it the right way flushing it out and putting the right oil your transmission needs cvt Transmission only use one brand of oil

[@mooma20121]

Good day i have a 2008 nissan tiida/versa after car warmed up. when puttin car in reverse it delays for like 10 seconds before reversing. Any idea of what could likely be the problem?

[@asianmechanicguy6483]

Ur transmission starting to have a problem while still not worst.. Follow my video clean the filter both of them this is the passage way of the fluid going up if its clogged the cvt parts will not work properly cuz theres no pressured fluids circulating inside ur cvt tranny

[@mooma20121]

Can u tell me about oil specification for my nissan versa 2007 please .. i find so many oil compinies and cans .. how can i now my proper oil

[@asianmechanicguy6483]

@@mooma20121 use ns2 fluid only go to ur closest autoparts store ask for that kind of oil

[@mooma20121]

How many cans it will take .. also some body told me that no need for changing oil .just i have to spray the plugs with contact cleaner .. what u think sir .. 🙂

[@asianmechanicguy6483]

@@mooma20121 6 quarts.. I don't know what plug ur body talking about.. Just follow my video it will save u a lot of money in the future

[@jtyler81]

Would this work for 2015 Versa?

[@asianmechanicguy6483]

it will for for cvt transmission that has this kind of filter

[@AnythingEverythingGh]

What solvent did you used for the cleaning?

[@asianmechanicguy6483]

Brakecleaner from Canadian tire

[@AnythingEverythingGh]

@@asianmechanicguy6483 When you drive for 15mins, to check the tyranny dipstick. Do you off the engine to check or put it at park and check if its at the hot section.

[@asianmechanicguy6483]

@@AnythingEverythingGh leave it running for 5mins up you dont need to drive it then check the dipstick oil should be on warm level

[@AnythingEverythingGh]

@@asianmechanicguy6483 Thanks Sir, i think am almost nailing up my hard shifting problem, when i do this. My oil is under the warm/ hot checked nob

[@strato1982caster]

P1777 p1778 p1140 p0840 p0130. C0400 p3000 c0001. I get the first 3 consistebtly. Others come and go and could be cause im sitting in texas heat tryin to atay cool. 2007 cvt only 70k miles the last few k its been needing 3500 4500 rpms to maintain 50 to 75mph. I had to go 200 miles in emergenxy this weekend i took 12 hours side roading it and stopping but sinxe then it first struggled then couldnt get up a hill and now wont nove at all. Reversw worked for a bit but now its barelt moving. Otger wierd thing is it wont even rev up in gear which id expect if it was slippage. I know id have to look at the pan but i dont hace that option at the moment. Was hoping youve got some better insigjt after posting and hearing other stories. I dont want to waste time in the heat and ask for money i dont have barkin up the wromg tree but if i kust gotta jack ir up and clean some stuff to get a few thousand miles out of it and make mobey knowing i need to replace im ok with that too. Plz let me know!

[@asianmechanicguy6483]

we cannot tell if your tranny still had life left till we open the tranny thats the most efficient way to determine it ..you have to look or check ur filter if its clogged and also you can check the pan if it has a small metal parts..sorry but you have to open ur pan so u can decide if you fix it or not

[@nitaikormokarnitai672]

Hi My car problem Nissan Tiida D Gear not Move Letar move 5 Minits after Go what is the problem please help me

[@asianmechanicguy6483]

check the code first then after that follow the video it will help yu alot and save hundred of dollars

[@mohamedsh4093]

Thanks a lot for your video it is helped me with my car . How many letter i have to put in the car?

[@asianmechanicguy6483]

thanks for watching my videos please like and share it thanksn again

[@f.tomassini9320]

How can I know what type of transmission my Nissan Versa 2007, CVT or Regular has?

[@asianmechanicguy6483]

for nissan versa it has a sign on dipstick holder and u cannot easily pull out the dipstick bec its lock

[@asianmechanicguy6483]

check your dipstick holder most cvt car has markings on dipstick saying cvt fluid only or for nissan it says ns-2 fulid

[@BranBepic]

The CVT will have an L below the D on the shifter in the the car, the regular auto will have 1,2 below the D

[@nladyman]

Checking in, did this and it worked for about 3 weeks and now its starting to slip again and the speedometer will drop; Im guessing my transmissions toast then

[@asianmechanicguy6483]

yup ur transmission is done dont spend another penny

[@nladyman]

@Asian Mechanic Guy I suppose it's worth replacing the transmission then, just hit 100k on my 07 Versa and got a similar estimate to what everyone else claimed on here haha, thanks for the tutorial though delayed the replacement by a few weeks! 😅

[@yamilehtrivera3935]

Mi amigo yo tengo un Versa americano motor,1800 año 2010 es el mismo procedimiento para desarmar y es la misma cantidad 7 cuartos y cuál es el líquido que usa para limpiar , muchas gracias y saludos desde mí bello país costa Rica

[@asianmechanicguy6483]

Gracias.por favor watch my other videos nissan transmission fix

[@golddragonrespect2140]

I want to say thanks for this great video, my 2007 Nissan Versa was no bower and there is a weird noise come from the transmission when I started it at the morning ,then I did what exactly on this video and I replaced the cvt step stepper motor Bart , after that the car run so perfect and no more noise for about 3000 miles , then the same problem back again ,after that I start over again then the same thing happened after around 3000 miles ,do you know what is going on? Thank you again and Stay awesome

[@asianmechanicguy6483]

Thanks for watching my videos i assume you had a worn or damaged variator another causes of a cvt tranny noise is damaged clutch lining housing and damage variator sealed ring. I suggest u to get a used transmission from the junkyard it will save you time and money

[@golddragonrespect2140]

Rhaswin's Garage thanks again

[@Arkata]

Hello mate, got yourself a new sub lol I myself have a Nissan Versa 2017 and it just stopped with me on the road today. It starts but won't go forward nor backwards. I'm thinking of doing what I saw you do in this video. Do you estimate that the cleaning of the transmission is the same as yours & when putting the pan back up, do i need to use sealants for the pan?? Thank for your time and the video, I'm hoping I can fix mines also

[@asianmechanicguy6483]

For 2017 versa no idea brother but u can try this method it will save u a lot of money

[@Arkata]

@@asianmechanicguy6483 Ok, alright Thanks for the fast reply then mate. If it works, I'll post a reply

[@5speed735i]

While it is awesome that you show how some transmissions can be bought back to life with new fluid and a clean set of filters, I strongly recommend changing those filters instead of just spraying brake clean on them. While I suppose the screen filter could be cleaned with brake cleaner, but a paper element filter??!! C'mon man, you're in this deep, why cheap out now? I truly hope that you didn't reuse the pan gasket too; well, at least that would only cause an external oil leak, but "cleaning" a paper filter could leave many harmful contaminants still in the filter media, and they could eventually find their way throughout the transmission. Great video, but change those parts man!

[@asianmechanicguy6483]

i would love to change that paper filter brother but unfortunately its not available in my area and the pan gasket i rather use the original one because its a good quality gasket its not a cheap gasket like today that it can easily break ..

[@5speed735i]

@@asianmechanicguy6483 well, if you have NO other alternative, then you have to do what you have to do. You know where I stand on this, I know where you stand, but again I do compliment you on showing what the procedure of filter changing looks like, and giving people the encouragement to repair things themselves- so all in all, thank you for posting this video.

[@mickysanmor]

I am trying this on my wife's 90 versa, GOD BLESS YOU

[@asianmechanicguy6483]

this is only for nissan versa with cvt tranny but yes you can always do this method to clean any nissan transmission for better flow of fluid inside the transmission

[@tempusfugit6820]

I don't see a dip stick. How do I check the level? Great video!

[@asianmechanicguy6483]

Check my other nissan versa videos there's a video there how to remove or check ur versa dipstick its a little bit difficult to remove it so check it out.. Thanks for watching

[@eymecoster]

how can i do that on non cvt transimission?and how i clean its filter too

[@asianmechanicguy6483]

I've never try to open a non cvt transmission yet for this specific vehicle

[@edhanm]

ung versa ko sir dito sa dubai parang ang bigat patakbuhin at ang tagal mag shift try ko gawin ung ginawa mo god bless and more power

[@asianmechanicguy6483]

oo bro try mo tong trick na eto malaki ang maitutulong nya sa power ng car mo

[@Buddylozada]

Can I PM you for some questions?

[@asianmechanicguy6483]

sure bro

[@Buddylozada]

Tol Baka puwede mag pa appointment pagawa ko nlng sayo Nissan Versa ko?

[@asianmechanicguy6483]

@@Buddylozada sure bro msg mo ako Rhaswin Miguel Uno Facebook

[@alexanderc05]

I want to say thank you for you video, it happen to me with the same car nissan versa 2007, car barely made it home, just went to limp mode, no more shifting of gears and no power, i did the same work, drained oil and came out black, pulled out mesh filter and small element filter all gunky and plugged, used about 6 cans of brake fluid to clean, once cleaned put everything together and added new oil, now hoping it would move, it did and went for drive test, all turned out great, thank you again, saved a lot of money by doing it ourselfs and not a transmission shop.

[@asianmechanicguy6483]

thanks for watching this tuturial video and please keep watching and supporting my other videos

[@markishios]

El pequeño filtro en forma de cubo se debe cambiar .

[@asianmechanicguy6483]

si, puedes cambiarlo, pero puedes limpiarlo para ahorrar algo de dinero

[@gustavomorales3937]

Amigo como podría pedir ese filtro pequeño?

[@firasalwakeel5365]

What was the km on the car?

[@asianmechanicguy6483]

168000km

[@ernestjrlleno3342]

Idol san k sa vancouver?

[@asianmechanicguy6483]

60TH FRASER

[@ImBanginYourWife]

Hey man, Thank you so much for posting this. I was so rattled that my transmission blew on my 2008 Nissan Versa. I followed your instructions and cleaned both filters. My car started and drives so smooth. Thank you for making these videos.

[@asianmechanicguy6483]

No problem bro just keep watching my videos and share it thanks...

[@notarango448]

How does it sound when a transmisson is blew do the belts on the engine look up does it soun like a flat tire then start smoking that’s what 07 Dodge Caliber did and I don’t what’s wrong

[@dennisreyes5248]

Bro yung sa akin 2004 nissan serena pg mg start ka umandar ayaw umabante parang may delay then eengage na yung transmission madalas ng spin/naiyak na yung gulong bago umabante. Ano kaya problema.smooth naman yung transmission sa initial lng ganun. Thanks bro.

[@asianmechanicguy6483]

bro scan mo muna ung car mo

[@dennisreyes5248]

@@asianmechanicguy6483 ah ok alam mo ba kung saan located yung yung socket para sa scan tool wala kasi manual thanks bro

[@asianmechanicguy6483]

@@dennisreyes5248 sa ilalim bro ng steering wheel

[@dennisreyes5248]

Thank you bro

[@keithmerriman6980]

And some very helpful followed it and it fixed the Nissan Versa I was working on thanks for supplying the bolt sizes

[@asianmechanicguy6483]

No problem and thank you for watching my videos

[@Pacsa]

Bro taga san ka? My versa kc akong kailangan ma service baka malapit ka d2 samin

[@asianmechanicguy6483]

Vancouver bro main Street and fraser

[@Pacsa]

@@asianmechanicguy6483 ah ok bro. Layu pala natin hehe calgary kami hehehe my problema versa ko pag malamig ang engine kung hindi ko i warm up ng 30 mins bro tapos pagpatakbo ko tapos stop sa stop sign pag gas ko parang machoke ang trans or engine cguro di ko alam hehehe

[@asianmechanicguy6483]

@@Pacsa bro kailangan mo munang ipa scan baka my code..

[@asianmechanicguy6483]

kung malapit ka lang sa amin tutulungan kita bro madali lang yan marami ang cause ng namamatayan ng makina maaring sensors maaring mechanical or just simple vacuum leak lang ...cguro bro una mong gawin tgnan kung my check engine second vacuum leak spray mo ng tubig ung mga hoses sa makina habang nakaandar ung car kung nagbago ang idle my vacuum leak

[@Pacsa]

@@asianmechanicguy6483 bro wala namang check engine or trans light. Pa scan ko muna to bro baka may code na lalabas. Mahirap kc pag puti kausap bro hehehe

[@MrPatdeeee]

I can't believe you did not replace that round filter; instead of trying to clean it. For filters of that kind can never become as clean as it was new. Oh well. The cost of them is very low. Just pull it out and push the new one in.

[@asianmechanicguy6483]

no available parts on my area

[@MrPatdeeee]

@@asianmechanicguy6483 I'm sorry I did not know that. Please forgive me.

[@minhn.ng.8557]

Thank you very much for sharing your knowledge to people. I just done it to my 2008 SL versa with your method. It was a success. My car run even better after cleaning the filter. I bought a kit for transmission maintenance but it didn't fit. So I used the old one. I will send you something to thank you if you send me your address.

[@minhn.ng.8557]

My versa 2008 has a cvt transmission.

[@asianmechanicguy6483]

Thanks a lot.. I received it..

[@jonyalaa2530]

Hi >>>>> the type of oil GEAR for NISSAN VERSA 2009 >> THANKS

[@asianmechanicguy6483]

for the engine oil use 5w 30 any type of oil synthetic or semisynthetic or regular oil as long its 5w 30 ...for the automatic cvt transmission oil use ns2 only..

[@jonyalaa2530]

@@asianmechanicguy6483 First I thank you for the quick answer Second, I have a job, he is Ano Alkir delayed by the tiger between the first and the second and Ron brings the 4 almost ......... You can advise me with great thanks and respect

[@Brianwutang]

Hey , I have the same vehicle, Can you PM me, I'd like to bring my versa to you if you have the time for some diagnosis. I think live pretty close to you.

[@christopherallum329]

Hi bro, I actually had the same problem. My mistake was that I did not clean the filter with the 5mm alan key screws. The issue came back again. My question is, do i have to clean both filters ? Thanks for your video btw, I'm a subscriber for life 😎🤙

[@asianmechanicguy6483]

yup both filter should be clean for better fluid flow

[@MrCordero68]

Why signal turn 🤪🤪🤪🤷‍♂️🤷‍♂️🤦‍♂️🤦‍♂️

[@asianmechanicguy6483]

sorry about that sir i think my other hand was holding the camera . so my left hand is on the steering all the time.next time ill be more careful thanks again for the advice..

[@splash5974]

Why comment?🤷‍♂️ Did you come here for transmission repair or driving lessons? Lol

[@premmohite3788]

I was about to send my shit to Junk Yard fixed and sold it hahaha not my problem anymore. No more Nissan just Honda Funda

[@HB-yq8gy]

I got a 2011 Cube with rumbling noise at low speeds all gears work drivable. Nissan dealer said trans is bad needs replacement $ 3500 1 year 12000 miles!!

[@Buddylozada]

Good job bro

[@asianmechanicguy6483]

Thank you so much 😀

[@ernestjrlleno3342]

Paayus ko sana my leak ung transmission ko

[@asianmechanicguy6483]

Sure bro saan ka located

[@angelocruz1246]

kompleto gamit a.

[@ciscokid9119]

✌😎👍👍👍👍🙋‍♂️Thank you for Sharing

[@asianmechanicguy6483]

Thank you too

[@RrRr-th1kf]

Oh my God to much varnish and dirty

[@asianmechanicguy6483]

yup it is dirty thats the most common causes of transmission failure