‘07-‘13 GMC/Chevrolet Door Latch Cable Repair

[@kipmiller7703]

I watched them too. I took your advice and it works perfect. 15 minutes and done. No taking rods off. Thanks very much.

[@craigpena]

Thanks for the vid. You turned a 2 hour job into a 20 minute one. I appreciate it, brother.

[@vanceyerby6099]

Glad I could help!

[@everlastingdecorativ]

My door handle outside and inside broke and I can't open the door from either side.. how can I get it open to get access to the latch?

[@colinbrandys1382]

Great video! It helped a lot! As others have said, getting the correct cable was the hard part. The parts store sold me the wrong one first. The correct part is the Dorman 924-481. It is almost 25" long. Apparently the mix up is if you have power locks or not, but most do. But the part most stock is for without power locks. Hope this helps!

[@vanceyerby6099]

Good to know on the cable difference! Really glad it helped!

[@user-pr2mj9hh8x]

Wow this was the easiest way to replace the cable. I must watch a bunch of videos saying take out the latch and replace the cable I could not get the clips out for the rods and then I just happen to click on your video and boy thats the best way to do it how you showed

[@user-pr2mj9hh8x]

I'll be learning more from your videos thx 😅

[@vanceyerby6099]

I’ve got some more soon!

[@johndurante2322]

This is the best video on the door cable. You helped me do this in 10 minutes in the dark ! Great short expl

[@vanceyerby6099]

Thank you so much for the comment. Really glad it helped!

[@mercys_x]

Man this was perfect! Taking those 3 torx out and loosening the regulator bolt made this a breeze! Appreciate it! 2011 Yukon XL Denali

[@vanceyerby6099]

Glad it helped you out!

[@dougwebber784]

Very helpful especially the tip to remove the window track nut and give yourself some extra space to get your hand in there. I have pretty big mitts and was very helpful,thanks

[@vanceyerby6099]

Glad it was helpful!

[@teesman03]

removing the 10mm nut down on the bottom is the game changer. I was done in 20 minutes.

[@vanceyerby6099]

Glad it helped!

[@raymondhutcherson1020]

Awesome made this process alot faster. Thanks!

[@bengalanos2554]

Following the instruction in this video saved so much time!!! Thank u, thank u, thank u

[@vanceyerby6099]

You're welcome!

[@mwlyons62]

That video was great after watching a couple of 20+minute videos I knew there had to be an easier way without the risk of breaking some of the plastic clips trying to detach the linkage. Worked perfect and a 2 minute video😛. Much appreciated.

[@vanceyerby6099]

Glad it helped!

[@glife2713]

Saved me a huge headache brother 👍🏿

[@vanceyerby6099]

So glad it helped!👍🏻💪🏻

[@juvejim]

That made it so damn easier! I couldn't get that yellow clip off for anything.

[@vanceyerby6099]

Yeah that’s the frustration that led me to this fix. That clip is terrible!

[@stepdaddy21_10]

You a life saver sir thank you for the video 👍

[@vanceyerby6099]

Beyond happy to help.

[@user-ns8fp1wk2e]

Very good video on that repair, thanks

[@vanceyerby6099]

You’re welcome! Glad it helped!

[@aidenthiesen9001]

Saved me so much time ! Awesome thank you!

[@vanceyerby6099]

My pleasure! Glad it helped!

[@rockinpoppy]

Thank you thank you thank you

[@vanceyerby6099]

You are very welcome! Hope it helped!

[@juanmontalvo1828]

Thank you quick and very helpful video God bless you Sir

[@thebrowncompound]

T30 on latch and I think the cable depends on if you have roll up windows Vs electric

[@nateb.1568]

God Bless you, sir.

[@vanceyerby6099]

Glad it helped!!

[@bryanliniewski3405]

Sweet worked perfect on 09 Silverado ……

[@vanceyerby6099]

Glad it helped!

[@stevezaccardi8498]

Worked perfectly thanks

[@vanceyerby6099]

You're welcome!

[@h.a.g.6669]

Thank you

[@hectortorres8079]

Awesome!

[@vanceyerby6099]

My pleasure!

[@henrymurawskibigdogrepair]

Thanks for the info

[@thebrowncompound]

Explanation 👌🏻

[@vanceyerby6099]

Thank you 🙂

[@chrismunroe7555]

I have to do that hear soon on my 08 so that's the way I will do it

[@gilbertalderete]

Thanks alot. This was so helpful.

[@glawton69]

What size cable did u replace. There are 2 sizes

[@vicentesandoval6332]

This made it way easier than all the other videos!!! Appreciate it!! Now to find the right cable!! Been to auto zone, orilleys and advance auto parts all only have 2 options of cables and one is too short and one is to long!! What cable did you use?

[@colinbrandys1382]

It's the longer cable, if you haven't picked it up yet. As long as you have power locks

[@TrevorJones007]

Awesome thx🎉

[@Mustang.Letti13]

Make a video showing me how to pop that other yellow clip beside of it so I can change my door handles

[@noahtopliff5429]

Very helpful thanks

[@glyshorts9107]

Are the ebay pull cables any good? Can get them on there for around 12-15 bucks. $68 bucks at the part store.

[@zanchezlugo1200]

Hello wat size is the latch cable

[@everythingyyouneed]

How long is that door cable I bought one on Amazon and it looks too short

[@bradlambdin2068]

two thumbs up!!!

[@BSnydr]

Is this for power door latch? GM claims I need to buy the entire system for $244

[@everlastingdecorativ]

My door handle broke after I closed the door interior handle as well.. how do I get the door open to access the latch and remove the interior panel..

[@everlastingdecorativ]

2008 GMC Sierra

[@deadlyliquidpcp]

​@everlastingdecorativ did you ever get it open I got the same issue going on my 2009

[@richardballew8958]

My 2010 1500 SLE Crew Cab drivers door won't open from inside or outside. Do you think it's the cable or the latch?

[@deadlyliquidpcp]

Did you ever get it opened up? I'm having the same issue on my 09

[@richardballew8958]

​@@deadlyliquidpcpyes. It just started working a couple of days later once it warmed up. So then I sprayed it with silicone lubricant and open and closed it a bunch of times. I did the same thing on all 4 door latches. Working fine now.

[@robinholiday7668]

What is the length of that door cable?

[@colinbrandys1382]

It's just about 25" long

[@sidneyschuerenberg8090]

Thank you

[@vanceyerby6099]

You're welcome