07-13 NNBS Silverado HD Conversion | How to Modify Bumper Brackets for the Best Fit

[@brucebelt623]

I usually don’t comment,but this is actually the the most informative video out. The rest are pretty much useless for useable information. Thank you !

[@thatsinglecabchevy1426]

Thank you. Taking your time to write this comment is much appreciated.

[@nofsgiven3855]

Damn I’m over here thinking I have to weld things. Thank you so much for keeping simple .

[@azaelmaldonado3685]

broo finally🙏🏻 someone that actually shows how to do it, got in a wreck so i finally decided to might as well do the hd, this is the only vid that explains how to do it

[@thatsinglecabchevy1426]

Thank you, brother. Damn, hate to hear about your wreck… but at least you’re making the best of it. You’re going to LOVE how the HD looks.

[@daltonbailey2405]

It’s literally that easy to make a diy video thank you for this and for all these other videos out there all they are doing is just guys talking to the camera with there buddy’s and bam the bumper is on magically

[@thatsinglecabchevy1426]

lmao! Thanks ☠️👊🏼

[@JuanGomez-nz5be]

The real mvp 🔥 getting my HD bumper was the last thing I needed but kept putting it off bc alot of videos kept saying I needed to weld it on, definitely going to start looking for a bumper now 🤘🏼

[@thatsinglecabchevy1426]

Hell yeah, bro! This way is by far the best way of doing this install. Love that HD Conversion on these trucks. 🔥🤘🏼💀

[@stevea6722]

Just found this video recently and immediately subscribed to your channel. Simplest and cleanest install of the HD bumper I've found. Also saved the fog light install video as well.

[@thatsinglecabchevy1426]

Thanks! ☠️

[@humberto6116]

This video really explains on what/how to measure the cut of the brackets, this really help me out. I did did the same thing you did on the video and it went smooth just had take out my tow hooks since the bumper didn't fit but everything went in fine I give this a 10/10 👍

[@thatsinglecabchevy1426]

Thank you for taking the time to write this. Glad it helped you. Sure wish I had this video before I did mine. Lol Much appreciated 👊🏼

[@Super123ronald]

Don't usually leave likes on video but this one deserves one. Awesome detailed video on the install. I have a 2018 HD bumper I wanna get installed but I'm soo close on just going with a 2011-2014 HD bumper.

[@thatsinglecabchevy1426]

That 2018 would look good! But, I really like the 11-14 HD…. Either way you can’t go wrong. Thanks for the support. 💀👊🏼

[@66l396]

thanks for making an excellent ( without the crappy back ground music)detailed how to for this conversion,I feel confident, showing this to my autobody guy will have my truck conversion done right.

[@thatsinglecabchevy1426]

Really appreciate you taking the time to give positive feedback. Most people only have something to say when they’re trolling. I’m really glad I was able to help you, I wish this video was out there when I did my conversion.

[@j.e.t.lifetothenextlife200]

@@thatsinglecabchevy1426 hey man how did you go about buying the bumper ? did you buy buy just bumper and brackets/side brackets or like did you go find a 2500 and take off all brackets + the hardware I wanna how to go about getting everything.

[@thatsinglecabchevy1426]

@@j.e.t.lifetothenextlife200 I was looking for an OEM paint grade bumper, so I purchased my bumper and brackets used from a local marketplace. It was a very affordable way to go about it, as it came with all the brackets, screws, etc. The only brackets I purchased new were the side brackets which I got from carparts.com.

[@matthewmedina5046]

Wish this video was out when i did my conversion😅 took me all day to install mine😂 very detailed, good job!

[@thatsinglecabchevy1426]

Really appreciate it. 😎🤙🏼💀

[@brydenlovdahl2102]

Could you do a list of parts you needed ti buy?

[@diamondboy3456]

I know the next thing im doing on my truck thank you for the bad ass video of actually showing how to do it i seen people weilding stuff and to find out you can just saw it and boom you got a bumper shoot im excited to do mine

[@thatsinglecabchevy1426]

Appreciate ya Bro! You’re going to love the HD set up. 💀👊🏼

[@Joker-tp3fd]

Finally someone explains it bit by bit, because no one explains how it’s done correctly😂

[@thatsinglecabchevy1426]

Appreciate ya. 🤙🏼

[@gaspargarcia4177]

Thank you! For take the time to make it, good video, I think a lot of owners sometimes we are confused about what to do fir conversion I think this video is very good, I have one question,have a silverado 2008, on the truck that you make the conversion what year is the 1500 and the parts for make conversion what year is the hd??

[@diamondboy3456]

I just got the bumper on my truck your the man it was kinda of a pain in the behind but we messed up by having the 2 bolts on the side of 1500 brackets tightened and it wouldnt let the 21mm bolt slide through we loosened them and wiggled it on till we found the holes and presto im rolling HD now truck looks crazy good now compared to the all black plastic front end 😂

[@thatsinglecabchevy1426]

Good to hear you got it on. 🔥 Personally I love the look of the HD front end on these trucks. Thanks for the feed back, bro 💀👊🏼

[@diamondboy3456]

@@thatsinglecabchevy1426 i love the look too my truck looks like a whole different truck now thanks to you,i really cant say how much i apreciate you saved me alot of money keep up the fire videos bro next thing on my list is buying all the fog light accessories and do the install on it too 💯💯🔥🔥

[@sl....]

Best video hands down

[@figet0358]

How do you adjust the front bumper to make it straight up and down ?? Thank you for the help

[@thatsinglecabchevy1426]

With the grille off, loosen up the frame mounting bracket bolts (4 total). If you’re doing it alone, leave them tight enough to hold as you move it or have someone gauge it for you. Place the crowbar (curved end) under the frame bracket, and pry back toward the truck. This will lift up and back on the bumper assembly. I used a 1 1/4” (give or take) piece of foam to gauge the sides of the bumper where it meets the fender. It’s a tighter fit than factory. 👍🏼 Once in position, tighten up the bolts one side at a time. Hope this helps. ☠️👊🏼

[@figet0358]

Not two on top but the ones on the side of the frame

[@thatsinglecabchevy1426]

@@figet0358 If the side brackets are pulling down on the bumper ends (when tightening the outside/lower bolt, you’ll need to measure the gap between the mounting bracket and side mounting brace. Then, use a spacer equivalent or slightly larger to that distance so you can tighten it up without pulling down on the bumper ends. For instance, let’s say on the driver side (no bolt installed) you have a 1/2” gap between the side brace and side mounting bracket, then you’ll need to cut a 1/2” spacer or slightly larger to fill in this gap. If you don’t have any spacers, you could also stack washers to fill this space.

[@jmx3v324]

So do I need to buy the 2500 brackets and side bracket too

[@alex-calix4843]

Yessir

[@angelvergara7906]

Hi I have the same truck I was wondering if you can tell me the name of the front grill. It looks really good and I plan to buy the same one for my truck thank you .

[@thatsinglecabchevy1426]

Thanks bro! It’s the 11-14 HD LTZ grille. I got mine NOS off eBay.

[@vendetta3040]

what kind of bolts or screws do you need to buy?

[@kylecouillard5041]

I have a question I never see answered anywhere. Would this conversion work on the sierra same years? i have always wanted to convert the front bumper to the hd Silverado bumper. i feel almost every other part on the truck is the same so i am hoping this will also work! thanks for any knowledge you could pass forwards

[@thatsinglecabchevy1426]

Seems like it would be, but I’ve never done one. You should be able to compare this video to what your truck looks like.

[@928Flores]

Would you happen to know the size of the smaller screws for the top bumper cap?

[@thatsinglecabchevy1426]

Uupper and lower bolts: GM Multi-Purpose Bolt 11589012 Aftermarket: 115890212

[@jaimetorres6074]

Do you have to cut both bumper mounting brackets ?

[@thatsinglecabchevy1426]

@@jaimetorres6074 Yes. Cutting both brackets ensures clearance. It will allow you to access the bumper mounting bolts for any additional adjustment after the bumper is installed.

[@jaimetorres6074]

@@thatsinglecabchevy1426 thank you for the response! Forgot to ask did you used the same hardware from the 1500 bumper or did you have to get new hardware ?

[@thatsinglecabchevy1426]

@@jaimetorres6074 You will reuse the 1500 frame mounting bolts and everything else uses the 2500. Sorry, I don’t have the 2500 fastener list.

[@toxicspace9417]

do i need to buy hardware to put the 2500 bumper tougher or do the 1500 bolts work for the 2500

[@thatsinglecabchevy1426]

@@toxicspace9417 The only 1500 bolts/brackets you will reuse are the frame mounting brackets. All other bolts/brackets are for the 2500.

[@maynorramos298]

Do you have a Link to where you got the HD conversion bumper and grill ?

[@thatsinglecabchevy1426]

Not sure if you're looking for the color match grille and bumper or chrome. The color match bumpers are currently unavailable. I looked for about 2 months before I found this OEM 2011 that was in good condition on a local online marketplace. Don't get me wrong, I still had to paint it lol. The color match grilles are no longer in production as well, but there are still some available. I added links for the color match and the chrome sets below. These were the best prices I could find. Color Match Grille: ebay.us/fRJOI6 Chrome Grille: ebay.us/mmgjlx Chrome Bumper: ebay.us/P Chrome Bumper Cap: ebay.us/nedZzW

[@maynorramos298]

Thank you Appreciate it

[@pierremendoza520]

Hope I'm not asking a stupid question but the piece that's under the bumper... "I'm not sure what's it called"... But did you paint that??? I'm trying to look for that piece in white on eBay and I can't. It's all black ones or chrome.

[@terrywoods4597]

Thanks so much for this video. I want to this to my truck now that it's laid for lol. I have an 07 first year in this body style. I really want to keep my stock hood. I'm guessing I'd need to go a with a different grill. If you have any info on the proper grill and using my stock hood that would be awesome. Thanks in advance

[@thatsinglecabchevy1426]

Thanks bro. Your stock hood will work, and I personally like the sleeker look. You can use any 07-14 grille with the 11-14 HD bumper.

[@henryro7936]

Dope video thanks man going to install mine soon!

[@thatsinglecabchevy1426]

Sick! Thanks bro, appreciate ya! 💀👊🏼

[@MrXcbravo]

Great video , followed it and fit was perfect with very minimal adjusting , thank you

[@thatsinglecabchevy1426]

Thank you, really appreciate the positive feedback.

[@fabianramirez7043]

Hey man for the conversion do you need anything else besides the brackets before installing it

[@thatsinglecabchevy1426]

The brackets are all you should need.

[@swagchamp1000]

Wish I had this video 4 years ago I payed someone to do it and they welded the brackets to the frame

[@alexflippen1228]

When you swapped the hood did you have to change the hinges or support springs?

[@thatsinglecabchevy1426]

I still have the 1500 hood.

[@alexflippen1228]

@@thatsinglecabchevy1426 oh I gotcha. It just looked taller from the front view like how the 2500s do.

[@BenSinz45s]

Excellent work, thanks.

[@928Flores]

Great video very well explain, my question is are the 1500 side bumper brackets different from the hd side bumper brackets? I haven’t purchased the bumper yet but trying to collect as much info on that before I purchase it. Can I use any of the 1500 bumper brackets for the hd bumper?

[@thatsinglecabchevy1426]

The 2500 and 1500 side brackets are different. You’ll will reuse your 1500 frame mounting brackets, and everything else uses the 2500 brackets.

[@928Flores]

@@thatsinglecabchevy1426 ok sounds good thank you so much for the info.

[@danielbalke9635]

Could you do a video talking more about the side braces, I feel like that’s something critical to show if it helps line it up. I have a 2012 Silverado and it has a DV8 off-road bumper. I’m thinking about doing the HD conversation and this video is perfect on how to modify the brackets, haven’t see this good of a video going over how to modify the brackets. But if you could make a short vid and talk about the side braces that would be great!

[@thatsinglecabchevy1426]

Thank, brother. Is there anything in particular you are interested in knowing about the side brackets?

[@danielbalke9635]

@@thatsinglecabchevy1426 a few things I’m wondering is where exactly are they mounted on the body, how important are they. Maybe just maybe if you could make a whole video on it that would be great. Or just tell me all about it because it’ll help me out a lot once I get my bumper

[@thatsinglecabchevy1426]

@@danielbalke9635 They are very important. The side brackets keep the bumper sides from vibrating while you’re driving. Also keeps it from sagging on the sides, relieving stress on the main front brackets. You use the 11-14 HD 2500 side brackets and they mount to the HD bumper just like factory, and you use your factory mounting location on your 1500 frame. On the frame mounts, they only line up with the mounting location closest to the frame. If you want to use both mounting locations here, you’ll need to drill it out. Please let me know if this helps. If not I’ll shoot you a quick video. 💀

[@manny3775]

can i use the 1500 side braces?

[@chrisortiz7599]

Hd grille wouldn’t need any modifications right?

[@thatsinglecabchevy1426]

That’s correct. There are no mods needed to install the HD grille.

[@DanielGonzalez-te4cu]

Can you make a video of how to install the foglights lamp brackets please 🙏

[@albertguerra1934]

Great video, got a question though I have an 09 is there a certain year bumper I need to do the install I know there is 07-10 & 11-13?? I ask because I tried putting 09Hd grill on the other day and didn’t fit because it was to tall or was it because my bumper isn’t hd yet?

[@thatsinglecabchevy1426]

Thanks. The 11-14 hd grille will fit with your 09 1500 bumper. I had this set up on my 09 before I did the bumper conversion. If you want to do the bumper conversion, you’ll want to use the same 11-14 hd setup. Looks way better than the 1500 in my opinion.

[@alexrodriguezLtz]

is there a braket that holds the fog holder on the 2500 bumper?

[@thatsinglecabchevy1426]

Yes

[@alexrodriguezLtz]

Where can i order them?

[@thatsinglecabchevy1426]

@@alexrodriguezLtz Here’s a link to Amazon. This is the bracket that supports the fog lights and corner side brackets. amzn.to/3mqv3c1

[@diegoaguilar3517]

does this work for the gmc sierra 1500 to

[@thatsinglecabchevy1426]

@@diegoaguilar3517 Haven’t done a GMC yet, but I’d say they are the same. Just take a look at what you’ve got and compare them. If it works, let me know. 💀👊🏼

[@chrisortiz7599]

Which brackets would I need to make this work? 6?

[@thatsinglecabchevy1426]

Everything you’ll need to know is in the video. Products links are in the description box below the Video.

[@FUTURGAMING3]

Do we use the same bolts from the 1500?

[@thatsinglecabchevy1426]

You will only reuse you 1500 frame mounting bracket bolts. The 2500 bumper assembly uses different bolts/screws.

[@JonathanMartinez-rp6cs]

Thanks for the video man do you know where I can get the hd bumper 👍🏽

[@thatsinglecabchevy1426]

Appreciate it. I wanted the color match so I had to buy an OEM used one. If you’re looking for chrome, the cheapest I found was on eBay. Here’s the link: Chrome Bumper: ebay.us/P Chrome Bumper Cap: ebay.us/nedZzW

[@gabejackson4526]

Hey do u need to buy bolts to install the hd bumper or can u use the ones that came on the truck

[@thatsinglecabchevy1426]

You will reuse the original 1500 bolts for the 1500 frame mounting brackets, but all the 2500 HD brackets will require the 2500 HD bolts.

[@gabejackson4526]

@@thatsinglecabchevy1426 do u know where I can get them

[@outlawperformancegarage5211]

Amazing video super great info much appreciated. I also have a Silverado 1500 with the Pro Charger that I want to do this front bumper on. Do you have a link where you purchased this bumper? And do I need a new grill

[@thatsinglecabchevy1426]

Pro Charger badass! 🤘🏼 I wanted OEM, LTZ so I sourced my color match on Facebook marketplace. Took about 6 months of looking, lol You could try that route or there is a link in the description for the chrome set up. Here is a link of a company I’ve used in the past for color match. Hope this helps, bro! 💀 paintedautobodyparts.com/gm-trucks-vans-silverado-pu-2500-3500-chevy-front-bumper-face-bar-primed-w-fog-oem-22765737-2011-2014-pl-gm1002846.html?gclid=EAIaIQobChMI9I6xmJ3N_QIVjGpvBB1n_AZVEAQYBSABEgKTVvD_BwE

[@thatsinglecabchevy1426]

…the 1500 and 2500 grilles are interchangeable. You can run the 1500 grille with the 2500 bumper or the 2500 grille with the 1500 bumper. The only thing is the 2500 grille sticks out about a 1/4” on the top sides of the 1500 hood. Some guys like this look as it has that old school slant back low profile vibe.

[@tkn24s]

Your the best! Im about to do this tomorrow

[@thatsinglecabchevy1426]

Appreciate ya! You’re going to love the HD . 🔥☠️🔥

[@youngyung4284]

I have 2008 1500 with 1 1/2 body lift, can I put 2011 HD Bumper on? Thank you

[@thatsinglecabchevy1426]

Yes sir, will be the same install on your 2008 with body lift. The HD will look good on it. 🔥💀👊🏼

[@daviddelacruz7496]

Would this be same process for gmc?

[@thatsinglecabchevy1426]

Looks like they use the same brackets, but I haven’t done the gmc yet.

[@fabianramirez7043]

Did you use the same bolts

[@thatsinglecabchevy1426]

All bolts/brackets are for the 2500, with the exception of the main frame/bumper bolt/bracket - you can reuse your original here . ☠️👊🏼

[@coleconrad6745]

Do you Have to get an HD grille for it to fit right with the bumper? Or can you use a 1500 grille with the HD bumper

[@thatsinglecabchevy1426]

The 07-13 1500 grille will work with the 11-14 HD bumper.

[@capitano3377]

Do you know the sizes of the bigger bolts? Or which ones would you recommend? I bought a hd bumper but I didn't with with any of the hardware

[@thatsinglecabchevy1426]

I can’t remember. There are schematics online that will give you the OEM bolt numbers. I found them under Chevy dealer websites then gave the OEM numbers to a third party seller that sold them at half the price.

[@rvnitupkev]

Can you do a tutorial on how to install fog lights and where can I get them at ?

[@thatsinglecabchevy1426]

Your timing was perfect. I just wrapped up a quick tutorial on how to install the wiring harness and headlight switch for the fog light upgrade. Doesn’t include how to install the fog lights, because they’re simple pop in and out. Super easy to do. Here’s the link - let me know if this was helpful. Thank you for your request. kzbin.info/www/bejne/nIW5Z4CPo8iCfKs

[@B2sdad512]

Great video Sir! Appreciate the knowledge

[@thatsinglecabchevy1426]

💀👊🏼

[@oneclean_nnbs4022]

where can i buy bumper and hardware

[@oscarmagana1880]

Where did you buy the front bumper hd can you share i like to get one for my 09 1500

[@thatsinglecabchevy1426]

I got mine on the used market and put fresh paint on it. I Wanted to stay all OEM. Color Match. There is a link in the description for the chrome set up. Here is a link of a company I’ve used in the past for color match. Hope this helps! 💀 paintedautobodyparts.com/gm-trucks-vans-silverado-pu-2500-3500-chevy-front-bumper-face-bar-primed-w-fog-oem-22765737-2011-2014-pl-gm1002846.html?gclid=EAIaIQobChMI9I6xmJ3N_QIVjGpvBB1n_AZVEAQYBSABEgKTVvD_BwE

[@_.daniel.r_1135]

@@thatsinglecabchevy1426 the link for the chrome set up isn’t popping up can you put it up again?

[@MrPurgeTV]

Quick question did you use the bolts of the original bumper brackets for the hd brackets, because I bought the hd brackets but it didn’t come with bolts

[@thatsinglecabchevy1426]

No I use the 11-14 HD bolts. The only bolts I reused were the 1500 frame bracket bolts.

[@jesusvaldes4664]

Would trying to install this bumper on a 04 1500 Silverado work ??

[@thatsinglecabchevy1426]

Would be awesome, but I don’t think so. Too many variables between the years. Don’t get me wrong, put enough time and money into anything and you can get it done… But I don’t think it would be practical.

[@auoreliocasillas5994]

Did you have to adjust the bumper for the girll as well or was it a straight fit ?

[@thatsinglecabchevy1426]

Grille fits right in. Only adjustment you may need to do is on the bumper itself.

[@omarsanchez5695]

I installed my hd bumper but my fog lights are loose do u have a link where I can buy the screws to mount it up or clips

[@wsjarethine2547]

I have a question what kind of clips or bolts do you need to hold all 3 pieces

[@miguelc2138]

Where did you get the grill ?

[@thatsinglecabchevy1426]

eBay

[@miguelc2138]

@@thatsinglecabchevy1426 did it come with the grey inserts ? Or you bought that separate?

[@thatsinglecabchevy1426]

@@miguelc2138 It came with them.

[@alex-qp4by]

what bolts did you use to put the bumper together and install the brackets? cant find any videos on how to put the bumper together

[@OsvaldoAcosta-f4o]

You need around 12 10mm bolts for the brackets alone. Then get

[@OsvaldoAcosta-f4o]

Then get 15 star point 1.5 inch screws for the bottom valence. And for the fog light bezels you use the bolts from the old bumper

[@OCCHEVYRIDER]

Great video and awesome details 👌

[@thatsinglecabchevy1426]

Appreciate it 🔥💀

[@dasprite83]

Does anyone have a parts list for the bumper and grill parts list

[@thatsinglecabchevy1426]

This is a good start of what you’ll need. 11-14 HD Conversation 1- BUM 11-14 FRONT BLK W/ FOG SILVERADO HD OEM Number: 22765737 Aftermarket: GM1002846 2- BUM PAD 11-14 FRONT UPPER PTD SILVERADO HD OEM Number: 22765739 Aftermarket: GM1014114 3- VALANCE 11-14 TXT SILVERADO HD OEM Number: 22755086 Aftermarket: GM1092213 4- FOG LIGHTS BUCKETS: OEM Number 25883360 (Left side) 25883361 (Right side) Aftermarket: 19370765 RH / 19370764 LH 5- 4- FOG LIGHTS BUCKETS: OEM Number 25883360 (Left side) 25883361 (Right side) OUTER BRACKETS: 25883350 (Left side) 25883351 (Right 6- upper and lower fasteners : GM Multi-Purpose Bolt 11589012 Aftermarket: 115890212 7- Hd wheel liners OEM #’s 22739801, 22739800 8- Front Driver Side Bumper Filler and Passenger Side Front Bumper Filler #’s 25883358 / 25883359 If your looking for the color match bumper go to 👉🏼 www.paintedoemparts.com/painted-oem-models/silverado For the color match grille check eBay. 💀👊🏼

[@eddiefuentes649]

How does the fender well fit ? my passenger side doesn’t fit right there’s about a 3/4 inch gap or so in the front from the plastic going inside into the bumper but my driver fits like OEM

[@Noizetistic]

That’s Wierd mine has gap on driver side and the passenger fits like oem

[@thatsinglecabchevy1426]

My driver side is the same, sticks out 3/4”. If you want the perfect fitment, you’ll need to get the 2500 HD wheel liners. …but with that said, I have an idea in mind of how to fix the 1500 originals. I’ll put up a video either way I go.

[@dasprite83]

I've tried looking to see if anyone has it fig I would throw up a sos to see if I could get some help

[@toxicspace9417]

what size and quantity of bolts do i need to buy?

[@thatsinglecabchevy1426]

@@toxicspace9417 I don’t have that in hand. I’d try contacting your local Chevy dealer.

[@elreyofyoutube3495]

Is that grill a 1500 or 2500

[@thatsinglecabchevy1426]

It’s a 11-14 HD Ltz grille.

[@retrobro671]

What year is that HD bumper?

[@thatsinglecabchevy1426]

2011 LTZ

[@retrobro671]

@@thatsinglecabchevy1426 thanks for the response! I’m about to do this, can’t wait!

[@elp0RtDoR12]

saludos desde Sinaloa, y al compa rosh

[@thatsinglecabchevy1426]

☠️🔥

[@jaysonswift3221]

how to get the front bumper and Grill

[@thatsinglecabchevy1426]

Not sure if you're looking for the color match grille and bumper or chrome. The color match bumpers are currently unavailable. I looked for about 2 months before I found this OEM 2011 that was in good condition on a local online marketplace. Don't get me wrong, I still had to paint it lol. The color match grilles are no longer in production as well, but there are still some available. I added links for the color match and the chrome sets below. These were the best prices I could find. Color Match Grille: ebay.us/fRJOI6 Chrome Grille: ebay.us/mmgjlx Chrome Bumper: ebay.us/P Chrome Bumper Cap: ebay.us/nedZzW

[@dimebagz22]

Dude!.......finally! 😂😂😂😂 thank you! Jesus I'm gonna share the shit out of this!

[@thatsinglecabchevy1426]

Lol, Thanks bro 💀

[@mario_theslumpedgod1155]

Man this vid is fucking awesome.thank you for this vid🙏🏽🙏🏽🙏🏽🙏🏽

[@thatsinglecabchevy1426]

Appreciate ya, ☠️👊🏼

[@anthonyramos9766]

Man you’re the shit!!! Thank you

[@thatsinglecabchevy1426]

💀👊🏼

[@danielbalke9635]

Couldn’t you have used the 2500 frame mounts to easily match the the bracket??

[@thatsinglecabchevy1426]

You can use the 2500 frame mounting brackets, but I don’t recommend this install method. The 2500 frame brackets sits about 2-3” higher than the 1500 brackets, as the 2500 truck body sits a little higher. You would need to section the 2500 frame bracket to keep the bolt on method, or you would have to weld the 2500 brackets to the frame and cut the excess off. By doing this, you also lose a pivot point for proper alignment of the bumper. No one really does this anymore, as it is more complicated and time consuming. The simplest way is how I’ve shown.

[@JBconnectt]

Make a list of the things you need to

[@unicornflakes6554]

Send link to the bumper please

[@manny3775]

if i drive w out the side braces would it fall off?

[@thatsinglecabchevy1426]

No, I’ve known guys that never put them on. They just tend to sag near the wheel wells and vibrate when you’re driving.

[@manny3775]

@@thatsinglecabchevy1426can i use all the old bolts off the 1500?

[@thatsinglecabchevy1426]

@@manny3775 Yes, I reused mine. 👍🏼

[@manny3775]

@@thatsinglecabchevy1426 thank you, i followed your video and was able to put it on last night 🙏🏾

[@SaxtonStanford-z8k]

Stoltenberg Greens

[@slugger99figueroa75]

Thank uou

[@thatsinglecabchevy1426]

You’re welcome., hope this video helped. 💀

[@jvi9682]

What do I do with the second 2500 bracket since the holes are closer towards the middle than the end?

[@thatsinglecabchevy1426]

Are you referring to the side brackets?

[@jonathansantacruz00]

GREAT FUCKING VIDEO MAN

[@thatsinglecabchevy1426]

Appreciate ya! ☠️👊🏼

[@anthonymontes3597]

🔥🔥🔥🐐🐐🐐

[@thatsinglecabchevy1426]

💀🤘🏼

[@toxicspace9417]

Did you use 1500 side braces or did your get 2500 ones

[@thatsinglecabchevy1426]

@@toxicspace9417 I used the 2500 side braces. It shows how to do it toward the end of the video.

[@toxicspace9417]

@@thatsinglecabchevy1426 thanks bro