08 Kawasaki zx6r mods! Free power

[@joeybones222]

Stoked I found your video man. I picked up an 07 last may and I’ve been loving it. I’m definitely gonna try this out!

[@speedfaith88]

@@joeybones222 I definitely recommend it will be nice 💪🏼

[@tylerdubuque8820]

Beautiful bike man I just pick one up that’s been sitting 3+ years it runs definitely going to bring it back.

[@speedfaith88]

Really like these bikes super fast enjoy it!

[@JonathanMeraz-bz2pf]

nice bike man, i have 2007. are you able to help out by making a video on how you did the jumper mod? i’ve been trying to do it without messing anything up

[@speedfaith88]

Yes I’ll make another video

[@JoeMommaFPV]

Great video man, I heard the jumper mod allows the butterfly valve to open up 100% as the servo doesn't allow that. But you pretty much deleted your servo. I did the same, I removed the entire servo and the wires, used safety wire to tie off the butterfly valve to the open position. But what I am wondering, is does that jumper mod even do anything once you've deleted the butterfly valve servo?

[@speedfaith88]

When you remove the cables from the butterfly in the exhaust it’s spring load it automatically goes to the fully open position and the jumper mod is suppose to change the ignition timing or something like that in your ecm

[@JoeMommaFPV]

@@speedfaith88 ahh OK I wasn't sure if I would benefit from this mod since I removed the servo and cables. But sounds like I can still benefit from doing it.

[@speedfaith88]

@@JoeMommaFPV I would do it I feel like I noticed a lot more on the top end once you hit 10 on the tac you’re gone like a rocket lol

[@ΣταμνάςΒασίλης]

So i can but the small mechanism back in if i want to return it back to normal right?

[@speedfaith88]

Yes as long as you put everything back the way it was

[@masonhall4753]

Yo bro, weird request but can you show how you wired up your brake strip, I accidentally ripped mine out when replacing my subframe and don’t have the wiring diagram

[@speedfaith88]

@@masonhall4753 I will make a video on it keep an eye out I’ll post it

[@masonhall4753]

@@speedfaith88 aye preciate it man, if you ever take your subframe out, be careful or you may be in my boat🥲

[@speedfaith88]

@@masonhall4753 noted 👍🏼😂

[@eugeneswart714]

Hey man,did the jumper mod work? I have the same bike?

[@speedfaith88]

I think it did I noticed more pull on top end at like 12k this bike pulls like crazy

[@eugeneswart714]

Thanks, I will try it. I'm in South Africa and got mine in 2012 from USA and still love it.

[@speedfaith88]

@@eugeneswart714 God bless man have fun on that thing they’re really quick bikes I love love mine going to be doing a cat delete and putting a tune on it for next season

[@rraaddoooo94]

hello can you add link to same led strip light please

[@speedfaith88]

www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiz3aTMqqaFAxUxaEcBHaStDL4YABALGgJxdQ&ae=2&gclid=EAIaIQobChMIs92kzKqmhQMVMWhHAR2krQy-EAQYAyABEgJDYfD_BwE&sph=&ohost=www.google.com&cid=CAASJeRor--H5A58QRPx8kZL_xq3971oEZ8jzWEl6hEHNtJQuaZXtho&sig=AOD64_3k_4-LlsBZlkpnzS2YQOeCqGXYAg&ctype=5&q=&ved=2ahUKEwjbjJ3MqqaFAxVuFFkFHROVBOoQwg8oAHoECAEQFA&nis=8&dct=1&adurl=

[@speedfaith88]

There u go

[@PaZuZu871]

Does the jumper mod also work on the EU model?

[@speedfaith88]

Everything I’ve read says it should do the same thing

[@speedfaith88]

So yea try it and see if you feel a difference on the top end

[@PaZuZu871]

@@speedfaith88 Ok thank you for the reply sir..ill definetly give a try 👍

[@TheShadeManGuitar]

That taillight is going to be hard to see for people sitting in a car.

[@speedfaith88]

You are right it’s definitely not that visible during the day. At night no problem tho

[@speedfaith88]

I just added another light strip got that coming up in another video

[@Bumbaclot213]

This is for emissions

[@speedfaith88]

I heard emissions but also heard it’s for noise reduction and I believe it’s for noise cause the valve doesn’t change emissions from what I understand but definitely made a difference on idle decibels