Rcr Rick Crawford 219/223 .612/.615 112+1 Little Lunati Cam, Trunion Upgrade, Kooks Mids, Solo HFC, MagnaFlow Mid Muffler, Rotofab, Bc Coilovers, Brembos, IPad Indash, Orange HSV Wheel and Accents. Tune by Pat G.
Пікірлер: 56
@JerseyFrank0076 жыл бұрын
Real nice job prepping the block, pal!
@krtknowles7 жыл бұрын
@09g8gtmgm-kory I know its a little late in the game, but at 4:54, you picked up the third from the end rocker, and put it back as second from the end. intake and exhaust rockers are different offsets, so if you reinstalled it like that, you have a pair of rockers in the incorrect spot.
@korygray55567 жыл бұрын
k k Haha yes I did notice that when I was watching after it uploaded. I did realize that while I was installing. the rockers are offset and only certain ones go in certain places with how that is. so I quickly realized what happened and referred back to the video to confirm it. thanks!
@chadsmith94683 жыл бұрын
Lol you skipped the whole damn cam install. Which I hope you went with a new cam gear and cam chain?
@johnnyboy5307Ай бұрын
What wheels are those in the rear and the size? They look nice
@YNTGUNS6 жыл бұрын
Wow I did not know the whole engine has to come apart to install a cam.
@jayjb8333 жыл бұрын
About 45 hp need to tune hood loop to sound meaner
@codylayne6 жыл бұрын
Did you change oil pan gasket after u dropped oil pan down? Im inthe middle of doin this to mine
@MRC_Garage8 жыл бұрын
what made you pick this little lunati (112+1)over the other lunati (625/625 112+0)
@korygray55568 жыл бұрын
this is the one rick recommended for me. the bigger little lunati is recommended with milled heads and back cut valves to get the most out of it.
@MRC_Garage8 жыл бұрын
+09G8GTMGM -Kory yea your right I remember reading something about that, I couldn't decide between the to but I do not plan on milling my heads right now
@kiplonto75245 жыл бұрын
Did you ever put it on the dyno in this config? I just finished literally the exact same mods.
@stelloakacash6 жыл бұрын
Is this the stock motor???
@richardscarlett79425 жыл бұрын
You need to leave the lifters and lifter trays in place when you clean those bolt threads. You got all kinds of crap in you lifter valley and lifter bores now.
@stevenliles85208 жыл бұрын
Could you put your parts list on here.
@edwinvaldes14534 жыл бұрын
Hey bro how you install your subs
@elevatedperformance6 жыл бұрын
Headers need to come out ?
@Itsnotmeitsyuu8 жыл бұрын
You basically swapped a cam?
@korygray55567 жыл бұрын
Mario Muro yup
@TNmuthafcknB7 жыл бұрын
Do you remember the torx size that are on the cover of the camshaft?
@Timothy_Jacob7 жыл бұрын
TNmuthafcknB T40
@kiplonto75245 жыл бұрын
T30
@RickW7084 жыл бұрын
Hey. is taking off the heads a hard job?
@RickW7084 жыл бұрын
I want to take the head off and take it to a shop to replace valve
@toneabet62527 жыл бұрын
your wheels clear the brembos alright?
@korygray55567 жыл бұрын
Darren Wood yes
@shawntyson54748 жыл бұрын
what headlights r those
@korygray55568 жыл бұрын
I made them, custom quad retrofit with halos. I have other videos strictly on them. check em out.
@Timothy_Jacob7 жыл бұрын
do you have to remove the bumper to get at the radiator?
@korygray55567 жыл бұрын
ViciousRacing I took it all off, altho it's probably not necessary. but in order for the actual cam swap it is, the cam comes out between the support bar and the bumper needs to be out of the way. just easier and I've removed it countless times messing with my lights and gxp bumper.
@Timothy_Jacob7 жыл бұрын
09G8GTMGM -Kory thanks, what lifters did you use and what length did your pushrods come out too?
@korygray55567 жыл бұрын
ViciousRacing ls7 lifters and I believe 740 for pushrods. I got the master dod delete kit from Adam cooper at aceperformance.biz he's a good dude n works with Rick crawford. infamous g8 guy
@Timothy_Jacob7 жыл бұрын
09G8GTMGM -Kory I've heard, thanks for the info man I appreciate it
@korygray55567 жыл бұрын
No problem
@Rscmgw236 жыл бұрын
Why did your pcm lock?
@korygray55566 жыл бұрын
This is my busting face previous owner had a VMS tune. They locked the pcm so you can't access their info. Just bs, especially for resale of cars.
@spydervs118 жыл бұрын
where did you get your gauges from!!??
@korygray55568 жыл бұрын
they're aeroforce interceptor gauges. Pretty expensive, but they read a large amount of parameters
@spydervs118 жыл бұрын
+09G8GTMGM -Kory i cant find them? where did you buy them from? i just got a 2008 g8 gt
@korygray55568 жыл бұрын
john carey www.marylandspeed.com carries them
@spydervs118 жыл бұрын
+09G8GTMGM -Kory what about the gauge pod itself?
@korygray55568 жыл бұрын
+john carey I made that
@maddiepaddie57 жыл бұрын
Dod or non dod cam?
@pontiacmaniac77723 жыл бұрын
Dod cam is a waste of money
@biggdame96916 жыл бұрын
Can you make me some headlights?.....$💰💰$
@TheFiremancarl8 жыл бұрын
Kory, how many hours did it take you to finish.
@korygray55568 жыл бұрын
About a week just taking my time and waiting for a couple parts. A solid 30-40 hrs working on it mostly by myself. It was also my first time and I cleaned everything up well on the Pistons and heads.
@TheFiremancarl8 жыл бұрын
Thanks Kory
@MRC_Garage8 жыл бұрын
where did you buy your cam at?
@korygray55568 жыл бұрын
I got a rick crawford racing cam. dod delete master kit with cam from ace performance.
@MRC_Garage8 жыл бұрын
+09G8GTMGM -Kory ok thanks, that's where I'm buying mine from also, have you drove your yet?
@korygray55568 жыл бұрын
+Montana Cox Cox make sure you get the arp head bolts for the extra 60 bucks with it. pm Adam cooper to get the best price in the ace performance fb page. the bumper, splitter, and wheels are still not on. battery is charging also. hoping to get it out this week and do some logging to send back to pat g for my tune, to see if anything needs to be adjusted.
@MRC_Garage8 жыл бұрын
+09G8GTMGM -Kory thanks I will get them for sure for the peice of mind, I'll keep watching for updates