1/150 Micro RC "Dual Mode Vehicle" DMV-931

  Рет қаралды 63,779

diorama111

diorama111

Ай бұрын

I modified TOMYTEC 1/150 scale Dual Mode Vehicle (DMV-931).
DMV is a vehicle that can run on both roads and rails.
Normally it runs on roads as a bus, but by protruding railroad wheels it can run on rails.
The microcontrollers for both the transmitter and the receiver are ATtiny3217, and the motor drivers are DRV8835 (two units) and DRV8212.
The driving motor is a diameter 4mm DC motor. The steering and mode change motor are 3.9mm stepper motors.
The motors were purchased from online shops, and the gears were taken from broken digital cameras that were disassembled.
Communication is carried out via serial communication between two Bluetooth modules (RN-4871U).
The battery is a Li-Po (55mAh).
The thin copper wire is magnet wire with a diameter of approximately 0.08mm.
[Dimensions (Bus mode)]
Length 53.5mm
Width 13.8mm
Height 18.0mm
Wheelbase 26.5mm
Outer tire diameter 5.0mm
TOMYTECの1/150スケールのDMV-931(Dual Mode Vehicle)を改造しました。
DMVは道路と線路の両方を走行できる車両で、通常はバスとして道路を走行しますが、鉄道用の車輪を出すと線路上を走行することができます。
マイコンは送信機・受信機ともにそれぞれATtiny3217、モータードライバはDRV8835(2個)とDRV8212を使用しました。
モーターは走行用が直径4mmのDCモーター、ステアリングとモードチェンジ用は直径3.9mmのステッピングモーターです。
モーターはオンラインショップで購入し、ギアは壊れたデジカメを分解して取り出したものを使いました。
通信は2個のBluetoothモジュール(RN-4871U)間でシリアル通信を行っています。
バッテリーはLi-Po(55mAh)です。
細い銅線は直径約0.08mmのポリウレタン線です。
車体の寸法(バスモード)
全長 53.5mm
全幅 13.8mm
全高 18.0mm
ホイールベース 26.5mm
トレッド 11.5mm
タイヤ外径 5.0mm
[Circuit Diagram Transmitter]
drive.google.com/file/d/1_BG1...
[Circuit Diagram Receiver]
drive.google.com/file/d/1oX9e...
[Program Transmitter]
drive.google.com/file/d/1XEBV...
[Program Receiver]
drive.google.com/file/d/1Qpzn...
[RN4871U Datasheet]
drive.google.com/file/d/1enTY...
[RN4871U User's Guide]
drive.google.com/file/d/1roFE...
[DMV-931 X(Twitter)]
hashtag/_DMV931?s...

Пікірлер: 144
@susugar3338
@susugar3338 Ай бұрын
I always feel so defeated every time see him solders QNF24 and smaller component packages on test board. This guy has hands of a neuro sugeon!
@TheRGSfan
@TheRGSfan Ай бұрын
I wish my hands were that steady!
@LiveLaserTTV
@LiveLaserTTV Ай бұрын
Fr frr
@madleech
@madleech Ай бұрын
Neuro surgery is how this guy relaxes between making these models lol.
@DisorderedArray
@DisorderedArray Ай бұрын
He gets great solder wetting on those tiny gauge wires.
@Michael-Madrid
@Michael-Madrid Ай бұрын
i always forget for you it isn't enough to just make it remote controlled, it also need more lights then the average BMW driver, outstanding work mate
@kasuga_a
@kasuga_a Ай бұрын
The skill to just solder the tiny copper wires and the microcontrollers and stuff are amazing! Keep up the good work man!
@daemiax
@daemiax Ай бұрын
What an amazing approach to challenging yourself. You decided instead of making it smaller, which I've seen you've built smaller vehicles; you chose to make it more complex. Simply amazing! Thank you for sharing this with us!
@anthonytesta3716
@anthonytesta3716 3 күн бұрын
That’s one micro build!
@OCDRex11
@OCDRex11 28 күн бұрын
Sounds like a train on the tracks, lol. Cool concept and build! Always impressed with how you cram all that in there. The DIY boards always surprise me. Great job!
@drasticmart
@drasticmart Ай бұрын
Absolutely beyond impressive, you have mastered micro RC! Here I am thinking my 87s were tiny and too hard. Inspiring!
@lordalexander8005
@lordalexander8005 Ай бұрын
I am once-again absolutely flattened by my astonishment at how you make such a feat of engineering look so easy every time! And even then- you take it one step further and completely lay-out the items used in a clear and concise manner. Cheers again for such a wonderful showing of talent and good old-fashioned hard-work!
@petervladyevich8535
@petervladyevich8535 Ай бұрын
A treasure trove of intelligence and skill.
@Friendroid
@Friendroid Ай бұрын
I have no words, just admiration
@larrynelson1776
@larrynelson1776 Ай бұрын
I was stunned by the fact that he got the dual mode to work, the working lights, turn signals, backup and brake lights are making my manhood shrivel.
@TomatOgorodow
@TomatOgorodow 10 күн бұрын
Crazy bus in real life
@Gerald_Hunker
@Gerald_Hunker 28 күн бұрын
Absolutely mindblowing! 😯
@xinlu2806
@xinlu2806 25 күн бұрын
This might be the most impressive model I have ever seen!
@Sohave
@Sohave 29 күн бұрын
As someone who works with "N" scale models as a hobby. The stuff this guy does is extremely difficult. And then put the applied engineering on top of the already difficult task since this requires both programming and a degree of familiarity with the circuits used that few hobbyists got. I would sometimes wish that a manufacturer picked up on some of the ideas this guy has! Tomytec, Kato, Faller are you listening out there???
@joecompton8142
@joecompton8142 29 күн бұрын
Agreed -ho scale modeler)
@nscaledelights
@nscaledelights Ай бұрын
Wow that's pretty amazing considering the size and all. I think the owner needs to sell these as kits.
@herbertscherff5047
@herbertscherff5047 29 күн бұрын
Köstlich, diese arbeit ist nur was für Genies. Bravo !
@guymontag2948
@guymontag2948 Ай бұрын
I loved the scale shot at the end. I'd forgotten just how small it is until then.☺
@jasonlee9289
@jasonlee9289 Ай бұрын
this is so awesome! I admire your work!
@hishin6180
@hishin6180 Ай бұрын
デュアルモードまで再現しているのが凄すぎる!!
@user-ps5qd8cd7e
@user-ps5qd8cd7e 28 күн бұрын
凄い、素晴らしいの他に、言葉が見つかりません。
@Onemodelcaraday
@Onemodelcaraday Ай бұрын
Great job!
@derz-crackmodellbahnvideosinsp
@derz-crackmodellbahnvideosinsp Ай бұрын
"Driver's license passed for street and rail" :-))) ... "👌👍" ... Regards😉, crazy Olli
@d.i.l.l.i.g.a.f
@d.i.l.l.i.g.a.f Ай бұрын
WOW, does not even begin to describe my amazement at your skill and patience, New subscriber here, and look forward to binge watching the rest of your videos. Just WOW WOW WOW.
@TheAstronomyDude
@TheAstronomyDude Ай бұрын
Incredible! I love this one so much. Even the sound of the motor is great. If I'm ever a tourist in Japan I want to ride a hybrid bus.
@user-pq6cu8rg1p
@user-pq6cu8rg1p Ай бұрын
私もdmvの模型は持っているがtrain modeの再現が限界だったのでバスモードも再現している上にモードチェンジにも対応している技術力に感動しました。もしこれが10万円で売られてたとしても即決していただろう。
@JS0218Eles
@JS0218Eles Ай бұрын
栄一10人くらいでは買えないだろう。昨今の半導体不足(と一匠特許権?)を加味しても20人クラス
@droughty666
@droughty666 Ай бұрын
Hey look, he's back!
@r.cprojetoetutoriais
@r.cprojetoetutoriais 22 күн бұрын
beautiful work
@harlanx
@harlanx Ай бұрын
This is one of my favorite hobbies of others that I enjoy watching. Thanks for sharing!
@akshitsoni9361
@akshitsoni9361 Ай бұрын
Bro, your videos really inspire me to study more so that even i can make things like this in the future!
@RoamingAdhocrat
@RoamingAdhocrat 29 күн бұрын
These videos inspire me to study more so I can create things like this in the past
@dmitriyfrolov6379
@dmitriyfrolov6379 Ай бұрын
Сложность проектов повышается! Класс!
@Sestorema
@Sestorema 16 күн бұрын
Great job👍
@thomaslevy2119
@thomaslevy2119 Ай бұрын
Amazing work! And full RC control, too! In America vehicles like this are called, "Hi-Rail" vehicles. Most are small trucks used for track inspection or larger trucks needed for track maintenance.
@poweredbyme13
@poweredbyme13 Ай бұрын
awesome! thanks for sharing
@c50sport
@c50sport 23 күн бұрын
WOW, daß ist der Hammer in 1/150! 👍🏻👍🏻👍🏻 Sowas hätte ich gerne für die Spur Z im Maßstab 1/220.
@5Perf65mm
@5Perf65mm Ай бұрын
Very impressive!!
@jayarenneilson6049
@jayarenneilson6049 Ай бұрын
that is incredible. wow.
@Thrashaero
@Thrashaero Ай бұрын
Besides steady hand and infinite patience one must know a lot about where to get these parts in the first place.
@chrislewis2262
@chrislewis2262 Ай бұрын
Hobby stores and rc stores.
@creativeworld3046
@creativeworld3046 26 күн бұрын
This is genius ❤
@cafe_joe
@cafe_joe Ай бұрын
Great Work!
@mythradites509
@mythradites509 Ай бұрын
What one would pay for something like this! Amazing work
@osmanpasha_diy
@osmanpasha_diy Ай бұрын
Very impressive! I am trying to design a BLE receiver for 1/87 models, and I'm not even sure it can be made smaller than your 3D electronics
@HobbiesWithHaddock
@HobbiesWithHaddock Ай бұрын
Amazing!
@deltarc
@deltarc Ай бұрын
Great skills sir
@WeapoKingNZ
@WeapoKingNZ Ай бұрын
Oh man, let me see this on a layout pleeeeease. I saw a news piece of the full size one and it's introduction to service. The aesthetic was immaculate. This is amazing.....maybe black out the windows tho.
@Elzhel
@Elzhel Ай бұрын
你们辛勤工作的成果给我留下了深刻的印象,它需要很长的时间和精密的相机,更不用说组装它所需的材料了。 感谢您翻译此聊天内容,朋友 😊😊❤❤
@Iden_in_the_Rain
@Iden_in_the_Rain Ай бұрын
How’d you know lol?
@zioeddy3338
@zioeddy3338 29 күн бұрын
Un vero Maestro! 🎉
@gilesengineer
@gilesengineer 17 күн бұрын
First class job!
@DaBoogie049
@DaBoogie049 26 күн бұрын
I have been questioning me this, since i was little!
@screaminlordbyron7767
@screaminlordbyron7767 28 күн бұрын
8:30 I thought you were gonna jump over some scale motorcycles ;)
@irelictus
@irelictus Ай бұрын
Ты гений! Восхищаюсь твоей работой!
@Anoges160
@Anoges160 26 күн бұрын
And I think, i am crazy with my N cars.. But this is absolut high end.. Wow... Respekt
@user-rj5sw3bx6g
@user-rj5sw3bx6g 17 күн бұрын
凄すぎます。
@Legotyres
@Legotyres Ай бұрын
Just fantastic 👏👏👏
@OweramRC
@OweramRC 26 күн бұрын
Awesome!
@jonathanvandenberg3571
@jonathanvandenberg3571 Ай бұрын
Artistic
@aspirinemaga
@aspirinemaga Ай бұрын
Would you publish onr day a full step by step tutorial including programming electronic chapter ?
@JanRodriguez1
@JanRodriguez1 Ай бұрын
I was thinking ' that's impressive turning radius' then he proceeds to parallel park!
@twokool4skool129
@twokool4skool129 28 күн бұрын
Very impressive.
@no_name9466
@no_name9466 8 күн бұрын
Обалдеть 😯, очень трудоёмкая работа, золотые руки.👍 Жду модельку легендарной AE86 Trueno! 😄 Привет из России. ---- 素晴らしい😯、非常に労働集約的な仕事、黄金の手。👍 伝説のAE86トレノのモデルを待っています! 😄 ロシアからこんにちは。
@OliverSatomi
@OliverSatomi Ай бұрын
あなたは天才です。 あなたの仕事は素晴らしいです。
@rizaldrew2314
@rizaldrew2314 25 күн бұрын
So cool 👍🏻 i wan't learning to your talanted ❤
@wonseok_song
@wonseok_song Ай бұрын
I think I saw this on Tom Scott's video
@Booskop.
@Booskop. Ай бұрын
Incredible.
@SOTETUモヤ
@SOTETUモヤ 23 күн бұрын
Gimmick System Perfect Amazing!!!!
@dennisbailey6067
@dennisbailey6067 Ай бұрын
Impressive.👍
@timkbirchico8542
@timkbirchico8542 Ай бұрын
hypnotic, almost.
@victorkazi8172
@victorkazi8172 29 күн бұрын
今回も素晴らしい出来ですね! 毎度ながら驚かされます。 オフロードカーなんて作ってみてはいかがでしょうか? スズキ ジムニーや三菱 パジェロなど
@orestes_io
@orestes_io Ай бұрын
Astonishing
@user-dc9sm3ix1h
@user-dc9sm3ix1h Ай бұрын
Awesome👍
@pontuswendt2486
@pontuswendt2486 Ай бұрын
AMAZINGNES!!!
@nek0desu
@nek0desu Ай бұрын
So cool !
@andytrewin
@andytrewin Ай бұрын
Bravo ~ excellent work. KR AndyT(UK)
@trainz12tm
@trainz12tm Ай бұрын
Это просто обалденно👍
@dfgaJK
@dfgaJK Ай бұрын
Sooo good!
@user-zb9nj3vr3p
@user-zb9nj3vr3p Ай бұрын
芸術的です!
@Tokioka
@Tokioka Ай бұрын
Sehr gut!
@CorrichetiLagga
@CorrichetiLagga Ай бұрын
Wow😁
@user-kk5yc3yz7w
@user-kk5yc3yz7w Ай бұрын
Вы молодец!
@nashviray
@nashviray Ай бұрын
Impressive
@adrianwilliams763
@adrianwilliams763 Ай бұрын
A full size one of these buses was featured on one of Tom Scott’s videos.
@Terrys-Steam-and-Cobi
@Terrys-Steam-and-Cobi Ай бұрын
Sooooooooooo cool!
@louis-jeanbraye9834
@louis-jeanbraye9834 Ай бұрын
:) again lol incrédible is true realistic bus :D tks for your works-rock micro
@Starche_fpv
@Starche_fpv Ай бұрын
So satisfying 🤌 both assembly and demonstration are masterfully framed and timed. Love it. How long did it take you to shoot and cut the video? Do you do preproduction test assembly?
@sauliusjance6300
@sauliusjance6300 Ай бұрын
This is insane level 😮 Where do you shop for whires leads and components to build this...?
@cleitonfelipe2092
@cleitonfelipe2092 Ай бұрын
Same as everyone, china. Only difference is that he's japanese so he's very close
@IIMTAII
@IIMTAII Ай бұрын
Wow 😮
@blackgrinders
@blackgrinders Ай бұрын
ФАНТАСТИКА!!!❤❤❤👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@user-wi3db1hs4s
@user-wi3db1hs4s 23 күн бұрын
진짜 쩐다
@vorteI192
@vorteI192 Ай бұрын
i can't look away
@ComentandoIsso
@ComentandoIsso Ай бұрын
Belo trabalho. Gostaria de saber onde ele encontrar os materiais como buchas, eixos, essa placa de alumínio, etc. Parabéns pelo conteúdo
@konradpierzynski4251
@konradpierzynski4251 Ай бұрын
Try doing bottom plate as double sided PCB. Down part for ICs and top for motors.
@gonfrecs-l8g
@gonfrecs-l8g 5 күн бұрын
HEY THERE, Why did you took off the "smart for two" red car tutorial, it was an amazing one ?????
@diorama111
@diorama111 5 күн бұрын
In order to increase the number of views for this video, I have made my other videos private. Someday, I will publish them again.
@gonfrecs-l8g
@gonfrecs-l8g 5 күн бұрын
@@diorama111 okay good luck!
@dhrustij7689
@dhrustij7689 3 күн бұрын
Someday ? I wanna build that red car
@enriclibert545
@enriclibert545 29 күн бұрын
👍🏻👏🏻👏🏻👏🏻👏🏻
@keertinandantiwari1103
@keertinandantiwari1103 Ай бұрын
Wow
@AstroKnight118
@AstroKnight118 Ай бұрын
Oooh! A hi-railer!
@SteveGT7
@SteveGT7 24 күн бұрын
Can you please try 1/64 scale next time maybe Lamborghini huracan I think
@romyaz1713
@romyaz1713 29 күн бұрын
incredible as always! is the noise coming from the servo? can this be elimenated with some filtering in the servo loop?
@Daddy_Gable
@Daddy_Gable 28 күн бұрын
Nope, the sound comes from gears scrambling together do to imprecise assembly / cheap gears.
@mdani76
@mdani76 27 күн бұрын
I think it's the pwm control of the dc traction motor; it's a pity, probably there are better (but more expensive) controllers that use higher pwm frequency; or probably... there's no solution with that tiny motors 😊
@romyaz1713
@romyaz1713 27 күн бұрын
@@mdani76 oh, i see what you mean. maybe if one puts a capacitor across the motor terminals, that would probably filter some of that high switching frequency
@mdani76
@mdani76 26 күн бұрын
@@romyaz1713 maybe... I see the author's video with a lot of expertise so probably there's no solution. those tiny motors have no inertial mass so they respond sketchy to pwm impulse and make that awful noise.
@KBY30
@KBY30 26 күн бұрын
I want to do this in 1/87 scale
@viturban6464
@viturban6464 Ай бұрын
Where can i buy these small gears and dc motors, that you used?
@philippeduparay9067
@philippeduparay9067 Ай бұрын
😃😃😃
@magiliangaming
@magiliangaming 29 күн бұрын
normal people must compete in this world agains others that can do things like this. i lose hope lmao
4WD Mini car with Suspension and Slipper-Clutch
11:07
アズパカ
Рет қаралды 147 М.
Они так быстро убрались!
01:00
Аришнев
Рет қаралды 2,3 МЛН
Как бесплатно замутить iphone 15 pro max
00:59
ЖЕЛЕЗНЫЙ КОРОЛЬ
Рет қаралды 8 МЛН
Restauro #30: Majorette FIAT Ritmo nr. 239
6:42
1 Euro Diecast Garage
Рет қаралды 41 М.
Destroying Lego Towers
15:48
Brick Technology
Рет қаралды 3,3 МЛН
DB20 動力化   MOD Motorized
5:21
diorama111
Рет қаралды 385 М.
Construction of mini hydroelectric power with Francis turbine
14:49
Construction General
Рет қаралды 3,8 МЛН
Extremely Realistic Micro OHV V8 Sounds Amazing!
18:15
JohnnyQ90
Рет қаралды 1,7 МЛН
6 Lego Vehicles vs 6 Obstacles
5:14
Brick Experiment Channel
Рет қаралды 17 МЛН
バスコレ「ボンネットバス」に動力を入れる!
0:52
Komomo ch. 御霊こもも
Рет қаралды 91
[NEZ-V1.0]1/64 RWD RC DRIFT CAR
8:44
DMRACING
Рет қаралды 9 М.
#يوميات_سائق_شاحنة_في_المانيا_ابوعباس
0:26
Eksperimen!! Modifikasi Sepeda Jok Paddock Sepeda
0:36
aseli bmx
Рет қаралды 1,2 МЛН