This RC mini car is so AWESOME I bought two of them. God bless you all!
@Scxjunkie10 ай бұрын
The mini e revo is probably the coolest mini you could get, however, I’ve had my arrma groms 2 maybe 3 times as high off vert ramps without breaking a sweat. The only issue they have is the plastic diff couplers/axel stubs will get weak and spin out, but it takes incredible amounts of abuse. They are brushed but in the skatepark it’s just enough to keep your jaw hanging at the hits and abuse they’ll take. Sweet video man, got a sub from me👍
@RCKnockout10 ай бұрын
Appreciate it bro! It is a fun little rc car!
@DeRock4012 жыл бұрын
You always seem to find skateparks or places that are empty! Every time I travel to find a new location it’s always packed with kids! Lol I’m a bit jelly
@RCKnockout2 жыл бұрын
Well it was during school hours and it was crummy weather so that’s probably why no one was there lol 😂
@mihacz Жыл бұрын
What’s the purpose of riding it like that - big air with smashing to the concrete, just to destroy it? Wouldnt be easier throwing it up in the air? Just askin..
@Prod5D2 жыл бұрын
Those diffs are though!
@RCKnockout2 жыл бұрын
Yeah they’re pretty tough
@khaledbassaleh94535 ай бұрын
How long does it take for a full charged 3s battery to get empty while driving but not driving so easy
@RCKnockout5 ай бұрын
Probably under 10 minutes
@khaledbassaleh94535 ай бұрын
@@RCKnockout ok thanks 10 minutes is not good
@RCKnockout5 ай бұрын
@@khaledbassaleh9453 you’re welcome….its not great but it’s to be expected with an 1800mah pack
@khaledbassaleh94535 ай бұрын
@@RCKnockoutok but do you Know how long With 3 s until empty if Your not Driving so easy
@RCKnockout5 ай бұрын
@@khaledbassaleh9453 maybe 5-6 minutes
@Prod5D2 жыл бұрын
If you put a center diff in there, you’d prolly save the driveshafts as well
@RCKnockout2 жыл бұрын
Maybe…..these driveshafts are very weak though
@Prod5D2 жыл бұрын
@@RCKnockout thank goodness I haven’t broke any
@RCKnockout2 жыл бұрын
@@Prod5D if you bash it hard enough you will lol
@Kapap_Śpiący3 ай бұрын
hello how long would 2 3s battery last? thank you
@RCKnockout3 ай бұрын
Probably around 10 minutes each
@Kapap_Śpiący3 ай бұрын
@@RCKnockout okay thanks!!!👍👍👍👍
@RCKnockout3 ай бұрын
@@Kapap_Śpiący you’re welcome
@Justa4banger792 жыл бұрын
So did the hot racing front and rear diffs work?
@RCKnockout2 жыл бұрын
Yeah they work really well
@Justa4banger792 жыл бұрын
@@RCKnockout Sweet. Yeah I have done almost every upgrade. I thought I had it "bullet proof " but I keep stripping front and rear diffs.
@RCKnockout2 жыл бұрын
@@Justa4banger79 yeah they’re expensive but they definitely are strong
@Justa4banger792 жыл бұрын
@@RCKnockout I just called Nankin hobby. They got 2 in stock. I'm on my way 🤘🤘
@RCKnockout2 жыл бұрын
@@Justa4banger79 awesome man!! 😎👍
@BatmanRc2 жыл бұрын
Hello On 3s ?
@RCKnockout2 жыл бұрын
Yeah 3S
@daveg54202 жыл бұрын
It wouldn’t surprise me if was cheaper to buy a new XL5 mini revo than to fix everything you broke.
@RCKnockout2 жыл бұрын
No it wasn’t too bad to get it fixed
@jasonmorgan6612 жыл бұрын
Thats really not good for launching. Thats like taking a rustler to a skate park. Shit will just fly off the car well atleast for me lol. That cars great on a BMX track.
@RCKnockout2 жыл бұрын
I had fun…..that’s all that matters……really “no” rc car is built to take on a skatepark lol
@RayRiv732 жыл бұрын
I bought a HBX 16889 pro and its a tank! For alot cheaper.
@RCKnockout2 жыл бұрын
as long as you’re having fun…..that’s all that matters
@gregory91572 жыл бұрын
I also prefer rcs in the tree 🌲 above balls 😂👍
@RCKnockout2 жыл бұрын
Lol 😂
@colinpohl7336 Жыл бұрын
To much for the 1/16 Revo
@RCKnockout Жыл бұрын
For sure!
@SaltCreep459 ай бұрын
Definitely a Great Fast Mini but Not a Basher no matter the upgrades you do to it .
@RCKnockout9 ай бұрын
Yeah it definitely isn’t set up to bash super hard
@t3floz4 ай бұрын
Do you have one and have you upgraded it?
@SaltCreep454 ай бұрын
Definitely upgraded 4 sure it Fast not yet a Basher @@t3floz
@t3floz4 ай бұрын
@@SaltCreep45 ye i have 2 e revo 16 since over 10 years back but just started drive again after a 7 year break. I havent upgraded them and i was thinking about if it was worth it but i guess not since i do alot of jumping etc. I bought a mjx 14210 because of its durability and Will get it next week. What do you break the most on your e revo 16?
@TN414082 жыл бұрын
How much runtime do you usually get on a 3s
@RCKnockout2 жыл бұрын
Maybe 10 minutes or less
@jordanoliveto58632 жыл бұрын
@@RCKnockout I get 30 min usually don’t know what you’re talking about 😂
@RCKnockout2 жыл бұрын
@@jordanoliveto5863 10 minutes is about all I get on 3s with an 1800mah Lipo
@tbonecoming72182 жыл бұрын
@@nvl2691 matters if you gun it the whole time or not lol depended on the person and mah
@damasterplays95642 жыл бұрын
I got a squre slash body and power hobby tiers i got alot more grip
@RCKnockout2 жыл бұрын
Nice…..what brand is the square body?
@damasterplays95642 жыл бұрын
I think power hobby
@damasterplays95642 жыл бұрын
Im making a KZbin video about it sometime
@RCKnockout2 жыл бұрын
@@damasterplays9564 I gotcha
@RCKnockout2 жыл бұрын
@@damasterplays9564 cool man!
@StriK3R_Versace6 ай бұрын
merry suge o
@nobody617 Жыл бұрын
I think you need more power. Thats all. More s's. 🙂
@RCKnockout Жыл бұрын
Always can use more power! 😉👍
@nobody617 Жыл бұрын
@@RCKnockout i just ordered a center differential. I just watched a video about it and it seems to completely change this car. Its out of control completely without it. I can't remember exactly what all was in your video i watch so many, but if u dont have a center diff its a must have . Oh i ordered wheelie bar and lights too. Hey, in the last three weeks i bought a xmaxx, an e-revo, a mini e-revo, a xo-1, a dji mini 3, a yuneec typhoon h plus, dji goggles and dji air unit camera and am putting it into the xmaxx. Im hoping to make it so i can easily move the camera to each car. But im starting with the xmaxx with the camwra inside so it doesn't get destroyed. Ill cut a hole in the windshield. Also going to buy new controller with a range extender, but ill get it all going first I recently bought hass vf3 milling center and am starting production of a cnc downhill type ebike. If you are into ebikes you will see mine soon. Just remember port Angeles. Cnc billet ebike. I done it for decades Yup, I'm having a blast! Cool toys! 😂 Cheers man!
@RCKnockout Жыл бұрын
@@nobody617 thanks bro! You’ve got a lot of cool rc cars! I do have the center diff in my mini e Revo by the way 👍😉
@nobody617 Жыл бұрын
0/100 aint bad. 😂
@B-Cobra2 жыл бұрын
If you knew how to jump and control it in the air you wouldn’t destroy it every time.