Tap to unmute

(1/2) Making a Machinists Hammer - Handle and Head - from aluminum on the mini lathe

  Рет қаралды 3,654,048

TimNummy

TimNummy

Күн бұрын

Пікірлер: 469
@TimNummy
@TimNummy 7 жыл бұрын
Download the drawings on how to make one of these yourself! www.patreon.com/posts/14548892
@HighlanderNorth1
@HighlanderNorth1 7 жыл бұрын
TimNummy A couple questions: 1. Are you using a broken broom handle for buffing? 2. Isn't diamond white buffing compound more coarse than the red rouge compound? **Btw: I don't know if "red rouge" is the proper name for it, but it's what our metal shop teacher called it in the 80s! He told us to first adequately sand, then buff with diamond white, then use red rouge to finish it up. 3. What is the tool that machined the checkered pattern on the handle in basically 1 fell swoop? Nice project, and even under non-high speed replay, it was probably a fairly quick project to finish.
@TimNummy
@TimNummy 7 жыл бұрын
Hey! Thanks for the comment. 1. It's just a piece of wooden dowel and in the case of the compounds that came in the kit I got, black is most coarse, followed by red, and finally white for a high luster polish. I did a whole video on it here: kzbin.info/www/bejne/jIHQeoV3r5WLnrs 2. See 1. :) 3. That's called a knurling tool and you can pick one up like the one I'm using here: amzn.to/2pI4fCq This project wasn't too bad but it was one of my longer projects of things that I've done, but it was also one of my earlier projects so there was still a lot of figuring out to do.
@goldunicorn88
@goldunicorn88 6 жыл бұрын
TimNummy what is the title of the last song in this video?
@orjisorjis8567
@orjisorjis8567 6 жыл бұрын
TimNummy пробуй брать на себя что бы стружки не было
@orjisorjis8567
@orjisorjis8567 6 жыл бұрын
Сделайте так что бы на этот молоток можно было разные носадки присобачить тапор отбивные и дальше
@daniel.aymond
@daniel.aymond 6 жыл бұрын
You should try spiral flute taps. When tapping bottomed holes it makes life a lot easier. Keep up the good work. I'd also suggest playing around with some scrap metal making radius chamfers by hand using both carriage and cross slide handles at once. Makes for some really nice looking and functional transitions.
@TimNummy
@TimNummy 6 жыл бұрын
Thanks! I definitely need to get some better taps - ironically, most the stock I have is "scrap" metal from commercial orders haha
@daniel.aymond
@daniel.aymond 6 жыл бұрын
@@TimNummy haha I hear ya. Keep it up, bro. Enjoyed your videos
@beltfeddestruction9522
@beltfeddestruction9522 6 жыл бұрын
This is absolutely awesome bro I made a hammer for my one project in machining class back in my tech school my dad was a machinist for decades and got me interested in it never been happier with a skill I've learned than when I learned machining learned on the old engine lathe's and overhead mill machines them Bridgeports cnc machines where a concept back then but I started learning then I'd rather hand machine any day of the week love the channel sofar bro awesome work
@TimNummy
@TimNummy 6 жыл бұрын
Thanks! I'm jealous of your exposure to both the knowledge and the proper tools!
@كاوسكي-ي4ق
@كاوسكي-ي4ق 5 жыл бұрын
👍👍👍👍
@eddietowers5595
@eddietowers5595 7 жыл бұрын
Geez, kid...you're a natural to this craft. Great work, nice finish. Can't wait to see part 2. Oh yeah....always have fun.
@TimNummy
@TimNummy 7 жыл бұрын
Thanks very much! I hugely appreciate that!
@eddietowers5595
@eddietowers5595 7 жыл бұрын
Hey, man...credit where credit is due.
@jerryocrow1
@jerryocrow1 6 жыл бұрын
Hi Tim: I am making your hammer in my metal shop as we speek. One suggestion: I am taught that the center drill shown at 7:21, should not be plunged deeper than the bevel. That way, the following drill will be guided by the interior bevel and not the lip of exterior shoulder. Do you (or others) think there is any difference here? Thanks again Tim.
@MadeInGarage
@MadeInGarage 7 жыл бұрын
Good and clean work! Well done! How does your lathe work?
@TimNummy
@TimNummy 7 жыл бұрын
Pretty well for the most part - a lot of things are more work than they should be on a full size lathe but it will still get the job done.
@greensun1334
@greensun1334 3 жыл бұрын
Very cool Hammer! JINWEI Tool-Holders are great for small Lathes like yours! 👍🏻
@BobbyFlay14
@BobbyFlay14 2 жыл бұрын
Great job man a tip from a cnc machinist also I like to make my handles out of poly to reduce vibration on the swing. Aluminium looks way cooler tho lol
@davidmartin2631
@davidmartin2631 4 жыл бұрын
6:43. YOU'RE FIRED!!!! 😂
@salemnaser2213
@salemnaser2213 7 жыл бұрын
This man is pro , and so does his machine.
@TimNummy
@TimNummy 7 жыл бұрын
Thanks so much!
@pondafarr
@pondafarr 6 жыл бұрын
I really like the wood dowel polishing technique...pretty cool
@DiesInEveryFilm
@DiesInEveryFilm 7 жыл бұрын
Awesome very good watch great quality videoing even when running the lathe 👍🏼👍🏼👍🏼
@Mocking69
@Mocking69 7 жыл бұрын
へぇ~こうやって作るんだ!! 勉強になります!!
@chrismechanic2000
@chrismechanic2000 7 жыл бұрын
tim, at 0:41 cutting a face on a bar that far away from the chuck is a really bad practice, i dont know if your lathe came with a fixed steady but that would be the time to use one, if you don't have one it would be a good project to make one. im sure you could imagine what would happen if the tool grabbed the end of the bar and knocked it off at an angle, if you had you hands or face in the way it would not be pretty, also it could damage your machine, machine safely and always think, what's the worst that could happen if....
@TimNummy
@TimNummy 7 жыл бұрын
I know :/ I don't have a steady yet and the material diameter was too large to slide it back through the chuck... definitely not good practice but I just wanted to take a careful, light facing cut to get it moderately square before setting the live center. I definitely appreciate the comment and am going to pin this to the top so others can find it as well. Thanks for watching :)
@bupereira
@bupereira 7 жыл бұрын
chrismechanic B Hi, I'm ignorant in this, what's the danger? Just out of curiosity.
@AlBorland3877
@AlBorland3877 7 жыл бұрын
the workpiece could snap out due to the friction caused by the cutting tool.
@chrismechanic2000
@chrismechanic2000 7 жыл бұрын
i saw the predicerment you was in tim, i did not know if you knew about steadys and wanted to point them out to you, great work on the hammer. ;)
@TimNummy
@TimNummy 7 жыл бұрын
Thanks for letting me know! Part of the reason I'm posting these videos is so people who know better can (constructively) tell me what I'm doing wrong :)
@SolidRockMachineShopInc
@SolidRockMachineShopInc 7 жыл бұрын
That Aluminum polishes up nice.
@dbeierl
@dbeierl 7 жыл бұрын
0:48 you can make a makeshift steady out of wood for something like that. Start thinking about end support when you get more than about six diameters away from the chuck. For this application though I'd think about marking the center using the centering head on your combination square (or that printed centering gadget someone pointed you to on the large-diameter video) and center punch it, then use the punch mark to start your center drill, starting with your smallest center drill so the pilot will go in your punch mark.
@Tocqueville2023
@Tocqueville2023 2 жыл бұрын
Ever used a living hinge for adjustable angle adjustment? Small angle adjustment to be sure but if the mirror or lens mount is very stiff so that if precision in an environment containing motors, it minimizes low frequency distorting an image.
@tameshdoobay6058
@tameshdoobay6058 6 жыл бұрын
Great vid. Only thing I can see that I would fix is that you used a Hex dye to cut your threads. From what I was taught, Hex dyes are for chasing threads and Circle dyes are for cutting them. I believe the only reason it cut relatively well was because it was a soft metal like Aluminum. Other then that, hats off.
@gregbent3602
@gregbent3602 7 жыл бұрын
I would love to have a lathe like that! A few tips though: Countersink the holes before tapping to avoid chipping teeth on your taps. At the start, turn the head completly first, leaving roughly .1 on the end, cut it off, then face it to size. After this then drill the hole on center for the handle. There should be plenty of room for the thread, so a blind hole will work(thats why we have bottoming taps.) Use a spring center and tap wrench to tap, its easier and not too expensive for those tools. Your finishes came out great though. Two questions: What is the diameter of the throat? and can you use collets with this lathe?
@TimNummy
@TimNummy 7 жыл бұрын
Thanks so much for watching and for the tips! I should definitely invest in some bottoming taps. I think the final product with the top trim piece came out really nice anyway though so look out for the second part video. As for your questions, the diameter of the throat is ~35.2 mm at the skinny part and ~38.5 mm at the ends. I've seen videos where people use collets that they just clamp into the chuck with this lathe, so I think the answer is yes.
@learningthehardway6186
@learningthehardway6186 7 жыл бұрын
Nice looking project! I subbed cause I love seeing what people can do with these mini lathes. I'm not new to the shop but I'm new to miniature machining, so I'm always looking for good projects that are within the capabilities of a mini machine. Happy chip making
@TimNummy
@TimNummy 7 жыл бұрын
Thanks so much! I'm glad you enjoyed and hopefully can pick up some ideas :)
@MrScrew
@MrScrew 5 жыл бұрын
Very Good Working
@khanusman7143
@khanusman7143 5 жыл бұрын
I can't believe this sir. Are u great sir. I am applying this idea thanks
@larryrobinson7492
@larryrobinson7492 7 жыл бұрын
Nice job on the hammer, not sure how you can stand to use that lathe. I have the newer model of that lathe with DRO, I can't stand to use it. I bought a 13x40 Grizzly and love it. I'm gonna try to build a hammer similar to that. Thanks.
@КоляАртёмов-ь1ы
@КоляАртёмов-ь1ы 3 жыл бұрын
Worked very well.
@MikedUp
@MikedUp 7 жыл бұрын
How does the slender section of the handle hold up to use being aluminium? I don't know if I'm just feeling a bit conservative or heavy handed but it looks like it could do with being a bit stronger. It'll be a project for the new year for me! Thanks for the great content.
@TimNummy
@TimNummy 7 жыл бұрын
I haven't used it too much other than tapping on things I'm making with the lathe but so far it's great and has a solid feel. The reason I went with that diameter is simply because that was the largest tap I had haha. But I honestly don't think I could hit anything hard enough holding it in my hand to come close to breaking it. Let me know how yours turns out and thanks for watching!
@dbeierl
@dbeierl 7 жыл бұрын
5:55 to avoid jaw marks on your knurling the best way is not to put jaws on the knurling. But you might try something like fish paper or pads of folded aluminum foil, or bore a chunk of nylon or wood to the OD of the knurling and slit it in three parts with your bandsaw, then clamp the chuck on that.
@SpeedysWoodshop
@SpeedysWoodshop 6 жыл бұрын
Hello! At 4:45 can you post a link to the round head cutting tool you are using? Thanks
@TimNummy
@TimNummy 6 жыл бұрын
Unfortunately it's a custom ground tool from a lot I got off eBay.
@SpeedysWoodshop
@SpeedysWoodshop 6 жыл бұрын
Cool, Thanks
@blackmoys5231
@blackmoys5231 2 жыл бұрын
Hi next time when you do a Thread, do a 90° lowering before, because its whey better for your drill.🤙🏼
@dtom1145
@dtom1145 4 жыл бұрын
Still have the one I made 45 years ago! Not sure about the precision sandpaper work though.
@luisgapr
@luisgapr 3 жыл бұрын
How is the name of tool in minute 4:48? Nice hammer!!!!
@TimNummy
@TimNummy 3 жыл бұрын
Just a piece of high speed steel that is cut into a curve shape... Thanks for watching!
@andysteward8619
@andysteward8619 5 жыл бұрын
Hey Timmy, whats the tool called that you used to make the grip on the hand section?
@terencem9962
@terencem9962 5 жыл бұрын
It's called a knurler.
@TimNummy
@TimNummy 5 жыл бұрын
I have it listed in the description :)
@fggf7933
@fggf7933 7 жыл бұрын
very awesome working.
@ifirefight1
@ifirefight1 5 жыл бұрын
What are the “sticks” you are using to polish the aluminum??? Is it a wooden dowel with something wrapped around it??
@TimNummy
@TimNummy 5 жыл бұрын
Just a regular wooden dowel with polishing compound on it!
@carlosalbertopsnovosilvano3966
@carlosalbertopsnovosilvano3966 7 жыл бұрын
É gratificante acompanhar os episódios, pois o aprendizado na riqueza de detalhes é muito útil para desempenhar projetos com mais facilidade.
@TimNummy
@TimNummy 7 жыл бұрын
Muito obrigado! Eu realmente aprecio isso :)
@joaocarlos_cba
@joaocarlos_cba 7 жыл бұрын
carlos alberto p s novo silva novo é uma ferramenta?
@averagepros4322
@averagepros4322 5 жыл бұрын
$500 lathe!! This is impressive given the tools!!
@entemomohTV
@entemomohTV 7 жыл бұрын
Does you lathe move when you tab or sand because of its general "whimpiness" or because you haven't bolted it down? Awesome content! Keep your great work up and thanks for sharing your talent with us. Cheers
@TimNummy
@TimNummy 7 жыл бұрын
Both haha... probably more so because it's not bolted down. It doesn't weigh that much so it doesn't have much heft to keep it still but also the rubber feet on the bottom are pretty narrowly spaced so it just isn't super steady. The good thing is that at least the tool doesn't move very much relative to the part even though the whole thing bounces around. Definitely something I need to improve either with better/wider feet or bolting it to something. Thanks for watching!
@jasonburns1407
@jasonburns1407 Жыл бұрын
Hi cool hammer. What material is the stick you use for polishing?
@fluffy4046
@fluffy4046 5 жыл бұрын
Them calipers and that neural is nice
@blacknwhitejahangir8564
@blacknwhitejahangir8564 6 жыл бұрын
Nice and excellent work
@nagendrapradeep2838
@nagendrapradeep2838 5 жыл бұрын
Which type of wood and paste are you use for shining? Super work sir
@sharkrivermachine
@sharkrivermachine 7 жыл бұрын
Very nice!
@mehmoodaslam4009
@mehmoodaslam4009 7 жыл бұрын
u did very will i never seen this type of ides great job dud
@TimNummy
@TimNummy 7 жыл бұрын
Thanks!
@benjaminreynolds6193
@benjaminreynolds6193 6 жыл бұрын
Very fascinating man. Good job
@claytonsmith4150
@claytonsmith4150 Жыл бұрын
I just acquired a mini lathe like this set up with a matching mill. I have 0 experience in metal work. Do you have any videos breaking down the functions of the various bits and cutters that you use? There’s so many different parts to the machine I don’t know where to start
@ajsiemers
@ajsiemers 7 күн бұрын
there's Blondihacks with a yt series for beginners
@claytonsmith4150
@claytonsmith4150 7 күн бұрын
@ unfortunately I was forced to sell it 😢
@jaygoodwin6287
@jaygoodwin6287 7 жыл бұрын
thank you for this great video. I want to buy the exact lathe as you. could you make a review on it and maybe another video on how to get it up and running. the reviews are mainly good but have a bunch of "must dos" before you run it
@TimNummy
@TimNummy 7 жыл бұрын
Definitely watch some of my other views... I've done quite a few that go into pretty good detail specifically because I had the same questions as you when I got mine. Hope they help and let me know if you still have questions otherwise!
@jaygoodwin6287
@jaygoodwin6287 7 жыл бұрын
TimNummy thank you Tim! You Have brought confidence to me. If there is something to do first except the belt and cog. What would you suggest
@TimNummy
@TimNummy 7 жыл бұрын
Good to hear! Probably this -> kzbin.info/www/bejne/gKG4aXWwg96Nrdk make sure everything is oiled and tightened properly. Rather than using grease like I did though, oil would be better.
@maheshchhaya9155
@maheshchhaya9155 6 жыл бұрын
best wood working tools
@jaykissinger2684
@jaykissinger2684 6 жыл бұрын
Hi Tim, Your project is really awesome and with your consent I would love to use your project for a training project for my high school students as it shows a basic understanding of lathe work. I am an Industrial Arts Instructor where one of the subject I teach is Machining. Thanks for sharing.
@TimNummy
@TimNummy 6 жыл бұрын
That'd be great! Just let me know how it goes :)
@dbeierl
@dbeierl 7 жыл бұрын
9:35, it's a good habit to never handle swarf with your fingers, always use a tool. You can get away with it to some extent with aluminum, but even aluminum can rip you. As I said, good habit.
@sef2273
@sef2273 7 жыл бұрын
Nothing like watching meticulous excellent work
@TimNummy
@TimNummy 7 жыл бұрын
I really appreciate that! Thanks for watching!
@dbeierl
@dbeierl 7 жыл бұрын
4:00 you're using lots of abrasives in your work, between the bars of compound and the sandpaper. I'd suggest covering the ways when you do that sort of work.
@felixchavoya6201
@felixchavoya6201 6 жыл бұрын
Nice 👍🏽 job
@ТопДруид
@ТопДруид 6 жыл бұрын
молодец отлично получилось
@dsit9955
@dsit9955 7 жыл бұрын
love the vid, I same the same lathe and its great to get your feet wet in machining, def need to bolt that baby down! Will make such a difference
@TimNummy
@TimNummy 7 жыл бұрын
Ha yeah I'm sure, right now I still need it to be somewhat easy to move though - hopefully sooner rather than later I'll have a dedicated place for it. Thanks for watching!
@kantatayal3780
@kantatayal3780 7 жыл бұрын
A best hammer looked till now in design
@TimNummy
@TimNummy 7 жыл бұрын
Thanks!
@معمرالقذافي-ظ3ك
@معمرالقذافي-ظ3ك 7 жыл бұрын
Good job
@معمرالقذافي-ظ3ك
@معمرالقذافي-ظ3ك 7 жыл бұрын
👍
@EmmaRitson
@EmmaRitson 7 жыл бұрын
very nice work! awesome
@TimNummy
@TimNummy 7 жыл бұрын
Thank you! :)
@siebewillems6297
@siebewillems6297 6 жыл бұрын
what are you using to make it look very shiney? so clean
@TimNummy
@TimNummy 6 жыл бұрын
I made a video on that... kzbin.info/www/bejne/jIHQeoV3r5WLnrs
@ecl1psed417
@ecl1psed417 6 жыл бұрын
Shouldn’t you have drilled the hole in the middle of the head AFTER the milling and knocking off of material?
@denniss6317
@denniss6317 6 жыл бұрын
Thanks for sharing, looks really good, will try to build it too :o :D
@TimNummy
@TimNummy 6 жыл бұрын
Let me know how it turns out!
@denniss6317
@denniss6317 6 жыл бұрын
learning CNC on a Seiger SLZ 400E right now, if iam finished the next practise i will start :D And will share :P
@robertshoff2072
@robertshoff2072 6 жыл бұрын
new to working on lathes. this is awesome to watch by the way. Whats the tool called you used to make the grip on the handle?
@TimNummy
@TimNummy 6 жыл бұрын
Hey! It's a Knurling Tool and you can find the one I used here: amzn.to/2pI4fCq
@robertshoff2072
@robertshoff2072 6 жыл бұрын
Thanks!
@MODzero556
@MODzero556 7 жыл бұрын
Do you have previous experience machining or did you just decided one day to get a lathe and see what you would do
@TimNummy
@TimNummy 7 жыл бұрын
I've always been a gear head and enjoyed tinkering in the garage but never had the chance to do any machining work (lathe, mill, other big tools that show no mercy) and finally found myself needing some custom parts that had to be done on a lathe so I figured it was a good time to get one and learn :) (also that was only a couple months ago and I've spent half the time fixing this thing)
@17industries42
@17industries42 5 жыл бұрын
"Even if the two sides aren't perfectly lined up with each other, they should at least be perfectly lined up with themselves". how the heck does that work.
@brandonb9452
@brandonb9452 5 жыл бұрын
17Industries I think he misspoke. I think he meant that even if the two faces aren’t lined up perfectly with the handle they’ll at least be lined up/ parallel with each other
@TimNummy
@TimNummy 5 жыл бұрын
It's been a while but I think I meant even if the center lines of each face aren't lined up, the center line of the face and the corresponding side of the hammer head would be aligned
@johnkanderson
@johnkanderson 7 жыл бұрын
Great stuff Tim!
@mny-patentcatalog681
@mny-patentcatalog681 7 жыл бұрын
Interesting , well done
@fernandorodriguez2130
@fernandorodriguez2130 6 жыл бұрын
Beautiful
@mehmoodaslam4009
@mehmoodaslam4009 7 жыл бұрын
nice work
@sarfaraznakum4692
@sarfaraznakum4692 5 жыл бұрын
Good work
@khalidmagdy8918
@khalidmagdy8918 2 жыл бұрын
What is the material you are shining with?
@cpt.Smallett
@cpt.Smallett 6 жыл бұрын
Hi colleague. You have poor surface cleanliness, tighten the spindle bearing (tune) and try to use kerosene when turning and cutting threads on aluminum, cleanliness will be better. I use a mixture of kerosene and diesel when processing aluminum By the way, what polishing paste do you use? P.S. Sorry for my English I'm a turner from Russia.
@TimNummy
@TimNummy 6 жыл бұрын
Thanks! I actually did a video on the polishing as well - kzbin.info/www/bejne/jIHQeoV3r5WLnrs
@perseus2084
@perseus2084 7 жыл бұрын
nice work keep up whit the work
@samisalim6598
@samisalim6598 7 жыл бұрын
timo the Gamer k
@AbdulKarim-uk5tm
@AbdulKarim-uk5tm 6 жыл бұрын
Very nice
@johncenacena3987
@johncenacena3987 6 жыл бұрын
Good job bro
@AndreiMAXRaducan
@AndreiMAXRaducan 6 жыл бұрын
Super cool😉 hammer💪💪💪
@dbeierl
@dbeierl 7 жыл бұрын
5:57 you can see the part jump in the chuck.
@TheGoodrum
@TheGoodrum 5 жыл бұрын
Yeah your not really supposed to face off material when it's sticking that far out but it's too wide go further in. Could use a steady though.
@chrisnichols9830
@chrisnichols9830 7 жыл бұрын
if you can find 7000 series aluminum its supposed to be better for machining. i noticed that 6061 is pretty gummy i know that welders like 6061 because its easier to weld, you said you are new so i figured i would throw my 2 cents in. keep up the good work!
@TimNummy
@TimNummy 7 жыл бұрын
Thanks! I'll have to see if I can get my hands on some of that.
@jamesfield5346
@jamesfield5346 Жыл бұрын
Good afternoon Tim, I just subscribed to your channel and I was wondering how you like the mini lathe? What brand is it and do you think it'd be a wise investment? I restore things and sometimes you just have to make the parts.
@kill-switch2248
@kill-switch2248 7 жыл бұрын
Is there any way to get a little bigger chuck to fit on the mini lathes so you can hold bigger diameter pieces closer to the chuck? Im not familiar with the mini lathes
@TimNummy
@TimNummy 7 жыл бұрын
Yes! It comes with a 4" 3 jaw, self-centering chuck but a common upgrade is a 5" 4 jaw chuck.
@kill-switch2248
@kill-switch2248 7 жыл бұрын
TimNummy awesome thank you for the info!
@RumpLeINtiLINsKinnIN
@RumpLeINtiLINsKinnIN 7 жыл бұрын
what make/ model lathe is that? Im gonna buy one. Also, how heavy a depth of cut can you take on that lil bad boy? Nice work
@TimNummy
@TimNummy 7 жыл бұрын
Hey! thanks for watching - This is it: amzn.to/2nVBrEc As for depth of cut... I'm not sure exactly but it does pretty well - I'll try to get you a more accurate estimate (depending on the material of course)
@RumpLeINtiLINsKinnIN
@RumpLeINtiLINsKinnIN 7 жыл бұрын
thanks so much
@brianknickerbocker8518
@brianknickerbocker8518 7 жыл бұрын
Really fun looking project.Got to figure out how to get a lathe.
@xfitgheriq8519
@xfitgheriq8519 7 жыл бұрын
nice job
@sajadrahimii424
@sajadrahimii424 6 жыл бұрын
awesom,good job
@georgederisse9564
@georgederisse9564 6 жыл бұрын
Very nice job Tim. I love it. Thanks for uploading this awesome video. 👍
@sadeem-studio-2024
@sadeem-studio-2024 Жыл бұрын
Hello why I can’t shape my aluminum like you did ?
@mekanikmekanik1876
@mekanikmekanik1876 6 жыл бұрын
What is the object that looks like a tree branch that you are rubbing to polish.
@halimavuc7239
@halimavuc7239 2 жыл бұрын
Parçayı parlattığın malzemenin ismi nedir?
@flamurkameri2144
@flamurkameri2144 6 жыл бұрын
Ich hoffe, dass ich bald drehen werde, weil das echt der ober Hammer ist. Top Video!!!
@akramok3713
@akramok3713 5 жыл бұрын
Please what is the name of this type of lathe and which country of manufacture
@Chainsawyou
@Chainsawyou 7 жыл бұрын
Whats the toughest metal you can turn on it?
@routers4935
@routers4935 7 жыл бұрын
Hello. What material is that one that you use to polish the aluminium? Thanks
@TimNummy
@TimNummy 7 жыл бұрын
Hey! I did a whole polishing video... Check it out :) kzbin.info/www/bejne/jIHQeoV3r5WLnrs
@11ej
@11ej 7 жыл бұрын
good job
@waso1107
@waso1107 7 жыл бұрын
**********************I have two questions" what is that tool called in which you made that nice grip for the handle? The other is; what is that wooden brush or stick you use before polishing the alu?
@TimNummy
@TimNummy 7 жыл бұрын
Hey! Thanks for watching! That's a knurling tool... here's the one I use: amzn.to/2pI4fCq as you can see it does a really nice job.
@TimNummy
@TimNummy 7 жыл бұрын
Oh and the wooden stick is just that - it's a regular wooden (pine?) dowel that you'd find at a home improvement or craft store.... it does a really nice job of polishing with the compound while offering a lot of control and no risk of getting wrapped up in the chuck like a towel would.
@brianadams7903
@brianadams7903 7 жыл бұрын
I know a John creasy. out of Lakeland Florida. good work on the handle. you looking to move up to cnc or is this just hobby work?
@TimNummy
@TimNummy 7 жыл бұрын
Hey, this is just hobby work for now - I may get into CNC as a hobby at some point though.
@davidfaraj2252
@davidfaraj2252 6 жыл бұрын
My uncle he is Judge I will tell him if he needs one.. Good work 😁
@ashwaniashu4
@ashwaniashu4 5 жыл бұрын
😂😂😂😂
@miroslavstojadinovic9583
@miroslavstojadinovic9583 5 жыл бұрын
Pa to je cekic!!!to zna I beba da napravi.
@JimIsGod4eva
@JimIsGod4eva 5 жыл бұрын
What did you use to polish the aluminum on the lathe? A wooden dowel?
@bupereira
@bupereira 7 жыл бұрын
What's that minilathe you use? it looks awesome to work with. Do you recommend it? By the way, third time watching this video, I'm fascinated by machining thanks to you. Any tips on how to get started? EDIT: Just saw your series of videos fixing the lathe... so I guess it's not great just out of the box. How to know what's a good machine for a newbie?
@TimNummy
@TimNummy 7 жыл бұрын
Haha that's accurate. I'm so glad you're fascinated! I don't know that there is any super high quality table top sized lathe on the market... and if there is it's probably very expensive. There are large commercial sized lathes and tiny watch maker sized lathes that are very good, this is just a neglected middle ground. As for recommending it, I'm totally new as well but I think any lathe of this style (Grizzly, Seig C2, Harbor Freight, or unbranded Chinese brand like mine) are all going to have similar issues at some point - so I'd recommend buying the cheapest one you can find and spending some time taking it completely apart, cleaning it, oiling it, fixing it, and then enjoying it. At the very least you'll learn a lot about the lathe in the process. As you can see, with a little TLC, these mini lathes can produce some very decent parts. I got started by inadvertently buying one and then watching a bunch of youtube videos :)
@OsamaAlBalooshi1
@OsamaAlBalooshi1 7 жыл бұрын
Fantastic piece indeed! i have a question though, i'm planning to make one using clark CL500 6 speed lathe, is it possible to use the tools provided in the links on it?
@TimNummy
@TimNummy 7 жыл бұрын
As long as they will work with that lathe, those are all the same tools that I used! Let me know how it turns out :)
@talibali4974
@talibali4974 7 жыл бұрын
Nice work
@sopanaiwale4893
@sopanaiwale4893 7 жыл бұрын
such nice skill working like lathe mc master
@sajadrahimii424
@sajadrahimii424 6 жыл бұрын
awsom.good job
Machinist Hammer! Let's Make One!
22:42
Blondihacks
Рет қаралды 348 М.
Вопрос Ребром - Джиган
43:52
Gazgolder
Рет қаралды 3,8 МЛН
I'VE MADE A CUTE FLYING LOLLIPOP FOR MY KID #SHORTS
0:48
A Plus School
Рет қаралды 20 МЛН
Почему Катар богатый? #shorts
0:45
Послезавтра
Рет қаралды 2 МЛН
Transforming A Stainless Steel Bolt Into A Fully Functioning Miniature Lathe Chuck
28:44
Making a Simple Cut Knurling Tool for the Home Shop
31:54
mikelevyonline
Рет қаралды 37 М.
Tapers on Hobby Lathes - How to make them and why!
20:40
Blondihacks
Рет қаралды 478 М.
Incredible Process Of Making Lathe Machine
57:29
Manufacturing skills
Рет қаралды 1,3 МЛН
Making a Machinist Hammer
14:54
Lathe Legends
Рет қаралды 168 М.
Making a PRECISION Machinist Jack || INHERITANCE MACHINING
21:02
Inheritance Machining
Рет қаралды 1,1 МЛН
Some UPGRADES for the Lathe || INHERITANCE MACHINING
22:20
Inheritance Machining
Рет қаралды 768 М.
You had one job (and you did it wrong)
23:06
Inheritance Machining
Рет қаралды 852 М.