1/200 Scale Missouri Build Video 2

This video covers the basic hull assembly and the "tin canning" or "oil canning" process. It's a long one, but it is also going to be a while before I can post another video so I hope you all enjoy it!
Check out Brian at:
/ @b.a.s.drydock
You can pick up the reference book I mentioned here:
www.amazon.com...
Music is by: The Midwestern and is used with their permission.
You can get a copy of it here:
themidwesternb...
I hope you check them out!

[@garyb2392]

I’m not the kind of model builder who builds for realism. With some of the models I’ve build, I have incorporated some painting techniques so the model looks weathered but that’s about it. That said, what you’ve done is next lvl in terms of weathering and realism; at least from my view point. It looks great! It speak to your creativity and sets you apart from average Joe’s like me who would have just primed and painted the hull straight up! Thanks for sharing. I was genuinely inspired.

[@TheMidwestModelShop]

Thanks Gary! I just try to do a good job.

[@garyb2392]

The Midwest Model Shop no one can deny how awesome the results are. You’re certainly doing great. Watching the next one as we speak

[@tammywehner3269]

as a former squid, most of the ships stationed in Japan had this effect. the wave action pushes the Skin of the ship into the ribs/internal bracing. we called it "waffle hull" from the obvious reference. if your ship encounters Heavy seas for a prolonged period of time = waffle hull.

[@icedragon642]

WOW, it looks AWESOME that being said, one you didn't take in consideration is she was only a year or so in action. The thickness is a lot thicker than on a tin can so these dents would have not been as "tin canned" in August of 1945. These came about more from time than use. You have done such an AWESOME job that even hated to have to tell you this. Keep it up, I'm LOVING IT!!!! FYI guys, I served on board her in the late 80s and 90s!

[@Cg23sailor]

oil canning, tin canning.... those may be terms for the modelling technique used to replicate the effect. But the phenomena itself is referred to as HULL DISHING. It is also generally only noticeable along the font portion of the hull, not the full length. generally around where the Bow flairs our to full hull width. It is caused by wave action slamming the hull and dishing in the hull plating between the hull's structural support frames.

[@nmdelrio]

Great piece of info. Yep, structural support frames, or "stiffeners" I think as I remember they are called.

[@TheMidwestModelShop]

Hull Dishing!!!! Thank you! You know.... it seems like there are a lot of things like this that we see out in the world and no knows what they are called.

[@keithwhisman]

I’ve seen the hull dishing or oil canning on the rear of ships as well like the USS Midway in San Diego.

[@TheMidwestModelShop]

@@keithwhisman Yeah the Midway is awesome!!! I was really stunned to see all the hull dishing on it when I first walked up to it. That museum tour is great. If you ever get a chance to see her sister ship, USS Lexington, in Corpus Christi, I highly recommend it as well. That ship's air conditioning is on point, too ; ) Makes the visit even more fun!

[@jkoeberlein1]

Damn you got me reading about the Iowa class battle ships. It had an armoured citidel that could stop 16" shells! What an amazing ship.

[@Snipermac99]

IMO the "oil canning" on the hull is stunning and brings ship to life. Kudos! Look forward to seeing the finished and weathered Missouri.

[@kevinjhonson5925]

now that looks nice I would never have the guts to take a scraper to such an expensive kit. I switched over to Acrylic paint 2 years ago and i love it and so does the wife, so much less smell and i love how fast it drys.

[@_7_7_7_7_7_]

Looks amazing and definitely makes a difference in the end. A couple techniques that have helped me with the hull dishing in the past is to prime it with a coat or two and then start on the hull dishing with a curved scraper. Scraping into the primer has really helped with a softer effect instead of going right into pure plastic. I used one of those extra soft pillows with the ripped up foam pieces in it to rest the hull on and it let me position/prop up the hull at all different angles which made it a lot easier to work on. Definitely helps with the scraping when it’s not totally parallel to the table. Looks 👍

[@TheMidwestModelShop]

Now that is some valuable information!!! I did a lot of "experimenting" before I filmed. And on the starboard side I arrived at your method of priming first. It definitely makes it easier to see what you've removed. If I had this to do over again, I would have done that first. And I would have moved ahead with a lot more confidence knowing that a little sanding and the paint layers really help sort everything out.

[@yobeatthat85]

First time watching a modelling video and I never realised the attention to detail with putting the dents in.........dedication! 👍🏼

[@reconranger1370]

Even though you may not be completely happy with the final result, I think your persistence has paid off and it looks pretty darn good. Thanks for sharing, great video.

[@GhostofCicero]

You mentioned the kamikaze dent. I was glad you did and I'm looking forward to seeing you replicate it. I haven't seen anyone else even try to do that. The oil canning is a great addition that adds a lot of realism to the model. I admire your dedication.

[@TheMidwestModelShop]

Yes. I have been thinking about this a lot. I'm looking for some solid info on where exactly the dent is. There are lots of pictures of the "dent" online, but I'm not seeing any good reference points for where that is at on the starboard side. I know it's towards the aft near a 5" gun mount.... but I don't know for sure. If you have a link or reference of the exact spot, that would be great to know!!! Thanks!

[@kevinharbeson8777]

I think the oil canning looks great for your first attempt. Never let anyone tell you that to fail is bad, remember it your First Attempt In Learning.

[@TheMidwestModelShop]

Kevin Harbeson I agree completely. I’m assuming 99% of individuals watching this video have never even thought about doing it, yet alone trying. I was hoping to share how one might attempt it.

[@garyhaber333]

Wave action,warping from welds, and being pushed by tugs for 70+years. She, the NJ, and the Iowa were usually berthed at the secondary carrier piers(2&3) near us in Norfolk back in the mid-late 80s. I was stationed aboard Concord AFS5, we were always berthed at pier 4 northside whenever we weren't overseas during our Med Cruises. We served with the Big Mo, Iowa,NJ, America, JFK, Forrestal battle groups from 86-89. We were present the day when the Iowa had her #2 turrent incident. I have yet to visit the Iowa again, even tho I only live an hour away in SoCal.

[@jzghostrider66]

You're amazing Ryback, its a shame you're not cooking for us.

[@graycloud057]

I wrote my name on the bottom of the keel when we were in dry dock once. Your model is looking fantastic.

[@roadsterman]

The "oil canning" is a good creative touch! Some oil canning on ship hills is when welding was done on the outside before the inside is completely finished.

[@2000spqr]

Ok.. every US warship I visited looked like you could kick your foot right thru the hull... you are correct, the hulls of US warships are dented very much so and very noticeable. I am impressed with your bold attempt to create that realism to your kit....BRAVO ZULU!

[@joeymigues3276]

The dents look great. They are the results of the wave actions on the plates between the vertical and horizontal bulkhead bracing.

[@andersmoore]

This is an incredible model and build. Great job on the “tin caning” and painting.

[@slackjaw703]

I really appreciate the research you put into building this representation. It’s about as flawless as your model building. You’re off to a great start. Thus is going to be another awesome build!

[@B.A.S.Drydock]

Thanks for the shout out buddy!! Glad the book is helping!! That's a lot of work to get that tin canning to look good!! She looks great to me!!

[@irontank1956]

You are doing a really fine detail job on that ship. I went to see the Arizona Memorial in Hawaii . The Missouri was berthed further down and you are point with the oil canning. Job well done. I have scene this effect on modern commercial ships at the Port of Houston Bay Port Facility when I was on patrol as a police officer.

[@usssaratogacv3lefevre978]

The tin canning came out great, it's a nice touch that you don't see much of. I do agree with the bigger scales did some more detail on the hulls. There is a sight, Scale Model Workshop Paul Budzik . He dose lots of videos on panel lines, hull plates and detailing. Not that you need the help.

[@XxbeyblademasterxX]

I'm building my first ever ship model rn, aoshima hiryu, and this vidoe got me motivated to do more than just basic work on it! Thank you Midwest model shop!

[@TheMidwestModelShop]

XxbeyblademasterxX hey thats awesome!!! I’m sure you’ll find the extra effort very rewarding!

[@charlesstevenson5141]

I thought photo etch was over priced till i watched how its done then never complained about it again. The materials, printer, software, chemicals and time involved in photo etching is pretty extensive.

[@robbleeker4777]

You warned us advanced that it would take time between episodes..I am happily surprised it was this fast already

[@TheMidwestModelShop]

Thanks Rob! Once I start a fun project like this I really try to work on it whenever I can. It's unfortunate that my training event is when it is. But oh well! Gotta make money to cover the hobby!

[@JohnPaul-my6ct]

Battleships, in fact Naval vessels of all kinds suffer dings, dents and bashes. When HMS Glamorgan had a catastrophic boiler room fire they had no steam to power the fire pumps. So they sealed off the burning boiler room and starved the fire of air. The resulting vacuum caused the hull to suck inwards by 6 inches on each side. They never tried to get the dents out so she spent the last 10 years of her life with a wonderful wave shape down her length. I was in the Royal Navy at the time and saw her like this.

[@billhuber2964]

Any project I do never comes out perfect. Outstanding job mister.

[@Mishn0]

I like the box top on the wall in the background. Nice touch! Colourcoats do naval colors in enamel. It works very well and is available in the US.

[@edwardsiegel8888]

for the black water line stripe i use auto pin stripping.

[@andrewgrace4410]

I like the effects you did, those dents are awesome 👌🏾😸

[@TheMidwestModelShop]

Thank you! They look great on the finished model.

[@jeffhardick]

Love the attention to detail you put into your builds Ben

[@Underwaystudios]

Nice work and always appreciate the finer details. @28:00 the "vents" are actually for dumping the empty shell casings into the sea and clearing the deck of the gun emplacement. The "hot shell man" would wear asbestos gloves or pads and shove them out a door in the deck.

[@mattiusthalius]

Gorgeous!! im obsessed with Iowa Class BB...my grandfather served on the Wisconsin.

[@TheMidwestModelShop]

I love the Wisconsin! I've visited her 2 times last summer. Great warship! And it is the Biggest Battleship ; )

[@ianmiles7348]

My Dad served on the Wisconsin as well. He was a Gunners Mate in ‘45 and ‘46 after the war.

[@jasondawn51]

Wow, fantastic work. Tin canning looks great. Very impressed!

[@behrens97]

I like the oil canning. Good job. I have heard it called "the starving cow look" also

[@nmdelrio]

The dents are amazing, such so much work and dedication put into them.

[@gsh319]

Great job. That 53" challenge is gonna look great. Thanks for showing all you work. Card scrapping is the best method, your on it. The problem is the divot "depth" is much less and using the massive tools in scale is tough to get the effect. They would be less noticeable but there. Light drags on the scrapper. What a project.

[@TheMidwestModelShop]

Yeah keep in mind that the divers get filled with paint. So it ends up being significantly shallower that what you see. In fact, I have a hard time even seeing them now. You can feel them. They are there. But it worked out nicely.

[@qwertyman9560]

Didn't know Benny Hill did model building ... :) Thanks for sharing, nice tips.

[@trakkerp4202]

Looks good, I have a few ship models in my collection to do up and may just try adding the hull details like you did.

[@AlbertD711]

Looks great. That sure is one big model.

[@tonyguerra1273]

(NOTE: Nigel at "Nigel's Modeling Bench" on YT did the dent thing on his Missouri hull as well). I pointed this out in the first vid, but the shp's hull experienced "dishing," which is what the dents on a Navy ship's hull are known as. "Tin-canning" is more related to Navy destroyers, more familiarly called "tin cans" by Navy folks. They're also known as "small boys" or -- in WWII, when it came to destroyer escorts (DEs) on North Atlantic convoy duty -- "grayhounds." Smalls boys (DDs, DEs, even fast frigates or FFs) were thin-hulled and lightweight, but they could be turned out amazingly quickly. Not so with battleships. As I found out when I was one of many, many who helped restore the Mighty Mo to her WWII glory back in '98, much of the dishing occurred over the many decades of her life, and not necessarily from her WWII service particularly, which was of relatively limited duration, except for her combat actions, of course. Any time Navy ships warp or kedge into and out of a pier ("warping" and "kedging" are more sailing-era terms but they're very descriptive) there's likely to be dishing as a result... expect when some dumb junior officer happens to ding the ship when he's parking it. That's totally on him, then. ;-)

[@Gunslinger1875]

Very nice! I just bought the kit, you're giving me wonderful ideas.

[@jacquescleghorn]

Oh wow I'm so happy for this project!!! Love your videos

[@props-model-shop]

Interesting approach with some real good ideas.......

[@shanelogan7159]

Even modern steel ships have indentations between the frames. It's caused by the shell being welded to the beams that make up the frames due to heat and easily seen by sunlight at certain angles. It is far more noticeable where the shell is thinner such as the deck houses. As the shell moves over the machinery spaces it is much thicker and even more so over the ballast tanks where it is up to two inches thick and nonexistent.

[@bigcharliesmodelgarage296]

Beautiful

[@dennisbrown6502]

I have been on this great Battleship when she was docked in Bremerton WA before being decommissioned in Pearl Harbor and is moored next to the Arizona Memorial.

[@rodneyjaswinsky6480]

Looking great Ben she looks like a monster of a kit. If you can get your hands on a magazine called full ahead they show you how to do a 3d effect on tin canning. Check it out as it gives you great idea on how to tackle problems in ship building I hope this info helps.

[@TheMidwestModelShop]

Thanks Rodney! I need all the help I can get!

[@rodneyjaswinsky6480]

@@TheMidwestModelShop Your more than welcome the magazine your looking for is called full ahead Knox & Baleares Class By ak interactive

[@pierre-marcrioux5015]

Great job with the hull! The tin can effect is awesome!

[@bilgerat7694]

That has been one of my how the bloody hell can I make it look right, bloody awesome work mate looks good as always till next time have a good one

[@shawneeheltsley8534]

It seems you are so hard on yourself. The tin can effect is so awesome! I wish we didn't have to wait till august

[@michaelhenry7243]

The texture looks great brother. I would've never done it to mine because I probably would've screwed it up. But you're canning dents look great. I'm not gonna lie, it's hard for me to do but you pretty much pulled it off. Looking great brother.

[@markmalasics8413]

I'm building a 1/200 HMS Hood by Trumpeter and I'm picking a couple tips here and there from these videos, but I steadfastly refuse to mutilate it by trying to make it look like it just came off a used boat lot in the south side. If that's someones cup of tea, so be it. I've never believed in displaying anything to show it at it's worst.

[@themadhammer3305]

This is the age old argument of 'as issued' or 'used'. personally I don't mind it so long as it makes sense for the ship in the time it is being depicted. for instance on this build I think it makes sense to add it since the ship does have significant dishing in pictures from the time the ship is meant to be depicted, However if you added it to your model of Hood I wouldn't agree with it since Hood never showed evidence of it at any point in it's service life. Like you said though to each their own. P.s. that 1/200 scale HMS Hood must be an absolute behemoth. I did one in 1/350 scale and remember it being a monster, that's why I prefer 1/700 scale now their far more manageable to build and display

[@panzerpete4389]

It looks great,awesome model.

[@styrenereplicas53]

FANTASTIC!! You amaze me with your skills. I can’t wait for August. Dave

[@colosseumbuilders4768]

The loops are mounts for the accommodation ladder.

[@sergeilebadev7412]

This really is extra-splendid; good work my friend!

[@HDSME]

tremondous work nice vedido I have the bismark in this series id be afraid to tin can it lol

[@husnainlotia2707]

I am amazed at the efforts you make to achieve the weathering effects (tin-canning). IMO, any lack of satisfaction YOU may feel over the result is amply compensated by your desire for excellence at, and devotion to, your craft! Having said that, if your aim is to depict Missouri as in Aug '45, she was barely a year old. Your "ageing" efforts would perhaps be more appropriate to the Korean War era. Or perhaps even Desert Storm.

[@josephspiteri7505]

For oil canning, I would have tried using a Dremel tool with an appropriate burring bit. I think it would be both easier to work with and much quicker.

[@TheMidwestModelShop]

Yeah that was my very first thought. The problem is you have to go slow enough so you remove the plastic and not melt it. But then you’ll be left with a rough surface. Which you’ll have to figure out how best to smooth without removing the very subtle indentations you made. And then there is the control issue. If you slip at all....you’ll have to do a lot of filling. But you’re right. It “could” work out really well. I’m pleased with the results I got. They don’t stand out, just like on the real thing. But if you look at the hulk from the right angle you suddenly see them. Just like on the real thing.

[@peterkensey6728]

Great work! It took guts to start carving stressed skin in such a valuable kit and your mapping of the framing was clear and concise. Your build will help me when I come to work on my kit. I hope your training goes well and I look forward to the next instalment.

[@rikbryan9709]

Wow! All you need are a couple of paddles and off you go lol!

[@razif6916]

Great work on the hull

[@kudukilla]

There are some gunsmithing gouges made for stock fitting that are smaller and would seem to be about perfect size for that carving.

[@good2us1]

Great video and good work! BTW no dent is alike/similar, keep up the good work.

[@user-vu3yi5rt4t]

Thanks for the awesome action.

[@dsinterior1]

Very interesting and very informative videos you have already uploaded. I'm also getting ready little by little for the construction, (after first completing the Bismarck that I already have and am in the construction stage)) and I have started the research My opinion is that I will get a lot of help from you I am currently looking for information on the manufacture of Is there a related video?? I saw in episode no 2 The preparation for the > but not for the > maybe you have video efforts on the way they are made I would be very happy if I could learn from you. Again, congratulations on all the work

[@the10thleper]

Hoy mate, good job. I like the oil canning with the half round scraper. This is a very intresting model. I enjoy building in large scales. I'll have to think about this one. I lean towards sailing ships but I do have a few large WW2 ships. Thank you for the videos and your dedication. New subscriber,

[@TheMidwestModelShop]

Thanks!!! I have a few all wood sailing ship kits that I’ve build/have started. I enjoy working on them when I feel like my plastic model kit skills have stalled out.

[@brianfoster7064]

Navy Blue is a very dark blue. Some mistake it for black. If anything you'd be looking for a bluish gray (aka: haze gray). ModelMaster has a Haze Gray of the WWII era "5-H Haze Gray," which has a purple/blue tint.

[@RonStanek]

I'm sure you could have used a Dremel tool with multiple abrasive bits, to do the hull denting. Would have saved time too. Think it would come out a bit more rib conformed? Great job! Many would not do this detail, maybe the model company could have included an extra bow section with hull denting, $$$$? Or include something to apply to the hull, like the zimuret on the German tank models. Vahevala!

[@Mr229357]

Nice work 👍🏻👍🏻👍🏻

[@Elios0000]

Tamiya and Mr. Color paints man i havent found any thing thats better

[@TheMidwestModelShop]

I like stamina and have started experimenting with Testors acrylic for brush painting. I’ll look into Mr. Color. Thanks!

[@NigelsModellingBench]

Think I'm gonna send you a couple of B-52 fuselage parts in 1/72 Ben,

[@TheMidwestModelShop]

Sounds good to me!

[@joecostello100]

Would maybe a black wash or dry brushing to bring out those dents? you are doing awesome work. I was just spitballing.

[@TheMidwestModelShop]

I'm actually thinking about putting a semi gloss coat on the hull...I've heard some stories about that being accurate anyway. But the idea is it would help reflect light from the right angles so you could see it better.

[@danielbritton8588]

That is just about the length of 1/72 scale submarine kits. Probably close to the wingspan of the 1/32 scale B-24 by HK. I think it looks fine. Even the bow. Forge ahead. You got a good build going & got the massive painting done on the hull. Good to see builds of stuff I wouldn't want given to me. Too big. I share your preference in Model master enamel. I do not mind solvent smells & like how enamel works. It torments me that they are discontinuing that line.

[@TheMidwestModelShop]

Yeah, the day I can't buy enamel flat black paint.....I'll probably throw a giant 3 year old fit.

[@rattlinghost8904]

Looks awesome

[@TOPHAT1966GS]

Next time try this method use flite metal adhesive tape and use burnishing tools to perform the tin canning effects. You will have to sand the flitemetal with various grades of sandpaper in order to get the paint to stick. Just search flitemetal on KZbin to see if this will help you out.

[@stratotanker327]

Dremel makes many, many attachments that might make that dishing effect go a lot faster.

[@mikemontgomery2654]

Looks good so far.

[@vindicari]

I worked in ship construction for 30 years and hull dishing (as opposed to collision damage) is caused by the welding process. welding the frames to shell plates causes this distortion. you don't see hull dishing on riveted ships.

[@jimelchek3811]

Very nice start. I'm impressed with your efforts to push the envelope, and your philosophy that the main thing is to have fun... after all it IS just a hobby and not life or death. I followed your Arizona build and ended up building my own... and then I took on the Missouri for good measure. There is a well published photo of the hulk of the Oklahoma (very close in size to the Arizona) tied up next to the Wisconsin which dramatically shows the difference in size and fittings between the capital ships of the two eras. You will have an interesting display should you choose to pose your two builds in proximity. I used both the MK and Eduard products on the Arizona, and the two Pontos products (Eduard hull plates, as well) on the Missouri. I'm close to finishing up the Missouri, and have a fair amount of surplus photo-etch between the two builds. Should you run into an issue or two and require replacement pieces don't hesitate to let me know and I might be able to provide at no cost. Again, keep up the good work.

[@TheMidwestModelShop]

Holy Cow, Jim!!! Thank you very much!!! I will keep that in mind for when I inevitably loose something!

[@esuwarriormodelshop6369]

I’m doing the same thing as Brian the hobbyboss 1/350 scale Arizona. Been talking to him for so pointers. I have the Arizona book by the same guy ordered. The Missouri is looking good. You show check out what I’m doing on the Arizona could use more help or criticism on it lol. Keep going buddy.

[@Duececoupe]

I'd love to see the USS West Virginia BB-48 in 1/200, as she looked at the Battle of Surigao Straight.... Looking great! 👍🏻👌🏻👏🏻

[@kennyk4134]

A soldering iron with the right tip could do the dents on the hull .

[@TheMidwestModelShop]

I thought about that. But it will just melt the plastic and you really need to remove it.

[@kennyk4134]

@@TheMidwestModelShop im thinking if you hold the iron a bit away from the surface with the right shape bit it might work .why not give it a try on a spare bit of plastic and see what it looks like .

[@TheHelado36]

Yes !!! Video 2 🥳

[@dalestrange5817]

you could have used an ice pick (fine point) and with a small wood hammer made the rivet heads yourself flip them over for the effect and glued in place.

[@ronstar7027]

You look good with that huge kit. I don't have a room big enough to build that one. I do small wood ship models mostly. Midwest Products kits, still available on eBay.

[@mikevanwoerkom]

Just started my ship as well. I have a bit of an advantage as I work on the ship so if you need a photo here or there let me know. Would be happy to snap one for you.

[@BrisketChef]

If it’s possible can you cover the cost for what you spend overall with the kit and upgrade parts. Thank you. Excited to see the build.

[@TheMidwestModelShop]

Hey Ron, I'm into this about $700 US. for this thing. You're mileage may vary depending upon where you get the kit, the Pontos kit, and how much paint you already own. I could have cut the price in half with just buying the kit. And spent just $150 bucks on the detail set if I had gone with a different manufacturer. But Pontos, supposedly, is the best one you can get. So far, with the exception of the hull plating, nothing has been overlooked. The PE will be the bulk of this build, for sure. Then you will probably want a display base and case for it. I will be building those myself and the cost will be negligible. But if you have to have those items made.... well a new case could easily run you another 3-400 bucks. But, yeah, I'll keep all the cost "in mind" as I go and ask again when it's finished. A little google search can get you a ball park idea of the cost of things.

[@HDSME]

NICE work i would never attempt the frame work thats way beyond me! Lol

[@TheMidwestModelShop]

Thanks! I just broke it down into lots of “small” projects.

[@travisshrewsbury7169]

Looks great man,wish I could get my hands on that model myself

[@lonewolf4136]

Glade to see your under way I orderd the upgrade parts today for that Sturling kit I will be doing BB61 that is because I am a ham operator and I had contacted that ship by radio.

[@milissathreatt8014]

It's the USS IOWA (BB61)

[@coriscotupi]

The "tin canning" could (should?) have been designed into the kit itself, avoiding the need for this additional work. Anyway the end result seems very realistic. ...It would be cool to install RC gear, motor, etc and convert this kit into a floating, functioning RC model.

[@patricklenigan1650]

Nature is one mean mistress!

[@jamesmorris7581]

I adore this content - its so usefull and helpfull.

[@beforethemast3678]

Just an FYI, I don’t think the Iowa class has rivet details on the hull due to the fact that the outer hull plating was welded as opposed to riveted.

[@MsEliasc]

the bump effect is not real, its only at the forship and at the endship, it comes mostly from welding and also from tugs, , midship the plates are thick and riveted.....

[@TheMidwestModelShop]

Incorrect. But thanks for the comment!

[@Deveolgaming1912]

I currently have the 1/200 scale Titanic, Arizona, and Missouri. I know your not fully done with Titanic yet, but out of those 3 which was your favorite build.

[@TheMidwestModelShop]

Well…. The Missouri looks the best when finished. However, the Arizona is a much shorter build. And has a lot of unique features. The Titanic is unique and you’ll never get tired of assembling guns with her. But I think Missouri was my favorite, in the end. However… I have CV-6 now. And plans to make a sea going diorama with it. So we will see.

[@bobschaefer6519]

You can see pronounced dishing on the hulls of subs. Nautilus had a lot of it ...

[@aussiefrenchman-hobbytable9960]

looks great !👍👍

[@1339LARS]

Holy makrel, this was really impessive, cudos !!!!